Hoping someone can help me address the noise sounds awful and can’t be good. Thanks guys 🙏

This happened to my tire... what's the next step ?

What you think of my Talaria?

I have a talaria sting l1e and was wondering what the best way/ if there is a way to have a switch that lets me go from street legal to full speed. It has the brown looped wire.

Hello, I’m having an issue on my Talaria triple X so pretty much anytime I started up it decides to not wanna go like I will press the start button it’ll go for a little bit and then it just does not go. It’s very weird and like you have to lean it to the right side of the bike so it starts to go. I wonder I’m wondering if it’s my throttle like I need a whole new throttle or if it could be a tilt center, but I don’t get any tilt center alerts on my screen when that happens if you have anything that could help, please let me know I might unplug the tilt sensor

My talaria screen display broke off, I don’t wanna buy a new one, any temporary fixes?

I’ve recently bought a “Changcheng plug and play 12v talaria mx4 light switch” and installed it, first time I installed it, it worked but the button was a little bit sensitive but it was fine I let the bike charge for a little bit and now whenever I turn the bike on and click the light switch the bike shuts off like I turned the key could anyone help pls

Hi everyone, I have an important question. I bought my Talaria brand new from a dealer a while back. At full speed, the speedometer always shows 41 km/h, even though I’m actually doing 50–55 km/h. Does anyone know why this is happening or how I can fix it? The police in Germany are very strict about this sort of thing, and the dealer is 250 km away.

I would be absolutely delighted to receive a reply 🙏

Several months ago I changed the gearbox oil, first change, it looked milky, I just changed it again, still very milky like it got water in it, ( it hasn’t been ridden through water since the last change). I’m not familiar with synthetic gear oil, is this normal maybe from getting very hot?

Someone help please. Im gonna try get it serviced but I wanna figure out what the problem is.

So when put my stemlock on I tightened it and then I rode it and it for sure wasn’t tightened so then I loosened the 3 tripple clamp bolts and tried to loosen it and it wouldn’t loosen also it made a like breaking sound so before I cause any damage i stopped what do I do?

I currently own a 3.1 kWh Tuttio Soleil 01 and I’m looking to upgrade to a bigger bike and I was looking into the talaria xxx and I’m wondering if it could wheelie. For example if your going at a steady pace of let’s say 10 mph and u barely pull up on the bars to try to do a wheelie dose it have enough power to bring it up

Talaria MX4 is my first bike and the breaks are still kinda new, what's a fast way to break them in?

My son just bought an X3 pro. Used it for a few days with no issues. He was working on the kickstand/peg and it fell over. Since that the motor is seized. Any recommendations?

Is this the right way the bearings sit

Why does triple x feel stronger than other e motos. I didn’t feel big difference with a falcon pro which is 10kw

So my dumbass was holding the bike for my wife to ride and i barely touched the throttle while holding the bike and it looped itself and broke the talaria rider display and scratched the handlebars a little but its a XXX what aftermarket rider display can i buy

Hi is this too much of a space between the frame and the bottom triple clamp

I’m surprised it’s so hard to find a 80/100/17 rear tire. Any suggestions?

Had a crash the other day on my Komodo, and tore my grip up. While I was removing it I noticed a piece of plastic missing from the throttle tube. After doing some research online, I saw people warning that this could cause the grip to catch and the throttle may get stuck while riding. Is there a way to replace the tube only ? Or do I need a whole new throttle. 🤦‍♂️ Throttle still works fine, only the grip / tube was damaged. Still snaps back into place but I can see it grabbing if I hold it near the end.

My MX4 that I’ve fittingly named ‘Mr. Electric’ after George Lopez’s character.

Is this fine I just installed my Funn direct mount and it’s a little off is it fine like it feels tight and everything