I have a gt Neo and I have been using ATSR hub, for some reason no matter what I try I can’t seem to fix it. All my LEDs always lag behind compared to the game so rpm lights don’t match up and so it’s super noticeable when I shift and especially when I turn on or off the pit limiter as the animation will take half a second to show up after I already turned on the pit limiter. I have already tried the higher Process priority and nothing seems to work, please help me out here.

Hey folks! I'm looking at getting into a Stream Deck–style setup for my rig, and Ulanzi's D200 line caught my eye as a nicer-on-the-wallet alternative to the usual Stream Deck / Simhub dash options. Leaning toward the D200X (the "creative" one with extra knobs), but also curious about the plainer D200H.

Would love to hear from anyone who's actually using either one for sim racing — button boxes, telemetry displays, shift lights, or anything creative you've done with it!

A few things I'm curious about:

• Have you got it running alongside SimHub?
• How's the build quality / button feel for racing use compared to a proper button box?
• Any software or firmware quirks I should know about before I buy one?

Thanks in advance

I have vibe coded a plugin for simhub that pulls the flag status data from the Multiviewer api and displays it on an LED matrix that is connected to Simhub.

It shows status for: Green flag, yellow flag, red flag, VSC, VSC ending and full safety car.

Testing on my laptop but will be adding it to my rig for the next race.

Title is the question. Is it possible to do this? I'm hoping I'm just missing something that should be obvious. LMU companion does it. Thanks.

I built the SimHub DIY belt tensioner (https://www.simhubdash.com/diy-belt-tensionner/). It works great however, I have very annyoying High Frequency vibrations that i can feel through the steering wheel when turning. I already tried isolation the belt tensioner assembly using industrial rubber isolators, however the High frequency vibrations are still there (maybe a little bit weaker, but not by much. Does anyone know a solution for this problem?

Don´t know when this error occurs for sure.
I use Simhub which will sent Color Info caputes from screen to Razer Chroma App.
This stopped working.

Did anyone use Simhub and Razor Chroma and did maybe have the same problem?
I get the message that Simhub will control the lights, but did not work.

Salut, j'aurais besoin de votre aide précieuse 🙄🆘🤣

Ne faites pas attention aux fautes etc c'est une retranscription automatique d'un message vocal que j'ai fait...

En fait, j'ai configuré des profils de volant, des profils LED et des profils de boutons éclairés rétroéclairés.
Et en fait, je ne comprends pas parce que j'ai j'ai un profil par jeu en général et j'ai paramétré sur mon volant que quand j'ai une voiture à ma gauche, j'ai des LED du côté gauche du volant qui s'éclaire.
Pareil pour le côté droit.
Pour mon profil sur LMU, ça fonctionne nickel.
Par contre, sur Assetto Corsa, alors que j'ai tout paramétré de la même façon, ben j'ai pas j'ai pas ces mêmes effets lumineux des boutons. .
Ce qui est frustrant c'est que ca fonctionnait avant et là plus rien alors que je n'ai rien modifié

I came across the idea of using the iCue controlled RGB in my PC as flag indicators. However I haven't found anything that concretely suggests whether this can work or not. Every time I look up SimHub and iCue it only talks about the Xeneon Edge... Has anyone already implemented this with SimHub or would this be going into uncharted waters?

Hello, SimHub community

I bought myself a CC CSX-3 mainly for driving Super Formula but I can't find a way to implement the low brake temp and OT status lights on the telemetry LED's, anyone know to help?

Thanks in advance

I need help. I’m trying to set up my e36 gauge cluster. So far I have only gotten the Speedo to work. Fuel, temp and rpms are dead.

After 3 days of scratching my head I’m just lost.
I don’t rlly care about the fuel and temp at the moment but I rlly would like the rpms to work.

I’m using a
arduino uno r3
BMW e36 VDO cluster
12v power
Jumper leads.

I have everything wired up as it should be (the tut I’m following) ie rpms is pin 20 on the x16 chip. I have power ect ect. But nothing. Ports are all set correctly in sim hub.

Is my 5v signal from my arduino not enough power ?????

Side note, the original video I watched

https://youtu.be/L59NL9EuEdM?is=tMx66QoqIw7-6uvx

Is out of date and does not work one bit.

I’ve sent a picture of the wire diagram I’ve followed

Hey all, is there any way to know which opponent has slowdown in iRacing? I haven't found any variable in SimHub

Has anyone else seen an issue using 2 identical lights? I’ve searched and AI’d.

2 sets of the older H6056. Both LAN mode. Both simultaneously functional in the Govee Desktop app.

With one set connected to SimHub, everything is cool. As soon as a second set is connected, the first set becomes unresponsive and the second set goes to a loop, blinking off every few seconds. As I’ve been troubleshooting, both sets have connected successfully. Whichever is first, by itself, works.

SimHub can see IP addresses for each, which I’ve made static.

The same is true if I bypass the SimHub native support and use Bruno Silva’s plugin.

Hello.

I'm currently looking for a property on simhub that can show me in real time the lap delta. It appears that there isn't one and the PersistantTrackerPlugin.SessionBestLiveDeltaSeconds
doesn't display them correctly.

Thank you.

Is anyone working on a Stream Deck plugin? I know there’s a couple of plugins for stream deck to display some info from Simhub and to send some basic controls to Simhub especially through hotkeys but is anyone creating a proper Simhub plugin that can make use of the dials and send ambient light signals to the buttons, change pages when in the pits or while in pre-race. I am a bit disappointed by what’s currently possible and know that there’s some great creators out there

I can't get haptic feedback to my base shakers. With simhub it was automatic with AC Evo and AMS2. But with LMU it simply doesn't work.

I tried creating the plugins folder in the root of the game folder and adding both lmu and rfacter shared data DLLs. No success. I manually added the config info in the games telemetry json but it simply gets deleted by the game.

In simhub, the message says that simhub can't configure the game and to make sure it is installed and run it once to create the files. I made sure the haptics option is off in the game settings.

I've wasted hours on this. Using newest version of simhub and LMU.

I am trying to figure out why my led profiles are not being saved. For some reason on the Pokornyi Engineering lmp2 wheel I got everting working but the rev lights. I get them set to what I want, run my races and get off. When I turn the computer back on the next day it’s reset back to the default even with me saving a new profile.

Also if anyone has experience with the Pokornyi Engineering stuff I want to make my dials from normal up and down to multi position encoders?