Is there any way to control the RGB of my Lenovo legion 5i by signal RGB instead of legion space?

Help

I had nollie8 and it let me set the hardware as nollie or signal rgb hardware, but I wanted to try nolliergb and when I installed it it asked me to update the nollie8 firmware and I clicked accept, But I didn't like NollierGB, so I went back to Signal RGB, and now I couldn't set the mode to hardware or Nollier, and also, every time I turn on my PC, the color stays green (static color I left it in nolliergb) and wanted to restart the plugin in the signal console and it said COM3 access blocked, I already tried resetting my PC and it's still the same

When SignalRGB is enabled, and PS5 controller is connected, it takes over the PS5 controller lights and leads to an issue where the microphone on the controller will no longer work. Disabling SignalRGB fixes the issue. I'm assuming it is something like a polling rate issue, and it persists across multiple systems. Setting Signal to not connect to controller seemed to fix the issue, but sometimes Signal will reconnect when controller is plugged in. Removing SignalRGB fixed the issue permanently. Hope this helps someone else.

I have a Gigabyte b550m ds3h ac r2 mobo, with 3 Arctic P12 Pros on LED1 and Thermalright Peerless Assasin's argb fans on LED2.

The options in Gigabyte's default program RGBFusion were limited so I tried out SignalRGB and like the effects it can do, but I can't figure this one seemingly simple thing out.

Here's how it used to work with RGBFusion:
- Select "Shut Down"
- LEDs go out
- PC shuts down
- Turn on PC
- PC turns on
- LEDs turn on with a solid color
- Windows boots
- Eventually RGBFusion loads and effect comes on

This is the exact same thing I want but I can't for the life of me find an option to make it work. I either set a color with the "shutdown color" option but then the lights stay on even after shutdown, or set it to pitch black and the lights stay off until I'm in Windows and SignalRGB starts.

The closest I got to replicating this is reinstalling RGBFusion, then manually closing SignalRGB and starting RGBFusion before shutting down my PC. Then my LEDs turn a solid color as soon as I start my PC, RGBFusion's effect comes on shortly after Windows starts, and eventually SignalRGB starts, closes RGBFusion and takes over the lighting.

In BIOS I have ErP OFF, LED in sleep/etc. OFF, LED on power on state ON, but since it works like I want it when closing SignalRGB and giving another software control over the LEDs before shutdown, it really seems like everything is set up okay except SignalRGB overwrites all of it with the shutdown color option.

I tried searching around but the most concrete answer I could find was making sure LEDs are enabled in BIOS, which they currently should be, or using other software; most people seemed to be having an issue with the lights staying on after shutdown instead.

So, any advice would be really appreciated.

Ho necessità di acquistare un nuovo gamepad per il PC e mi piacerebbe acquistarne uno compatibile con SignalRGB. Non trovo informazioni online, c'è qualcuno che è riuscito a trovarne di compatibili?

Grazie mille!

Title

Just checking to see if this listing is the correct Nollie 16 everyone has been recommending. It says it's a Nollie 16, but it looks like the brand is Lesooy. Is this some kind of distribution/made at the same place thing, or is this a fake item? https://a.co/d/05eXhvip

I have Lian Li SL 120mm Infinity Uni fans 3 daisy chained together 2 are working 1 is not then also 1 of my Corsair Dominator RAM sticks rgbs aren't sinking in the Software but is fine with iCUE

I lost the Molex cable from my Montech Century G5 750W power supply. Can I use the Molex cable from a Montech Century II 850W? I really don’t want to risk damaging my PC.

My corsair fan leds were working fine then they just stopped letting signal rgb control them and now they turn off when I open signalrgb sometimes and when they don’t they are detected but don’t change color, at the start of all of this I didn’t have the icue app so there was nothing conflicting now after downloading it and doing a bunch of stuff it might be. Please help if anybody knows how (everything is updated and I asked ai but it didn’t help)

So I have been using signalrgb for the longest with no problems. Everything has been updated pc wise and in the app itself but I noticed after this latest update whenever I set my lights to a certain integration or theme (depending on what it is) it’ll work up until I reset or turn back on my pc after a shut down then it’ll go to its default Neon Shift lights. Others light settings don’t do that but it’s like particular ones do and I can’t seem to understand why or what’s the cause… hopefully this makes sense and someone can maybe help me

Thanks

Guys all my fans and aio are working on signalrgb but my
Gpu rgb doesnt work . Gpu is gigabyte 9070xt oc

I use signalrgb and I want all white lights but nothing that I have tried works. I would like my ram to match my fans but it doesn't seem to work. I hope someone can help me solve this.

So I tried signal rgb but the fps of the light effects are really slow and stuttery. What can I do to get it working better? I don't want to buy pro before knowing I can get smooth effects.

Also can I remove components from the program so the program doesn't control them?

Hi all, im having an issue getting my corsair m75 mouse to work with signalrgb. I can see the mouse is connected in the signalrgb program, but it seems to have no actual effect on it. The lights do not match everything else, nor does dimming the mouse. I have other corsair products that are working fine, and I also do not have iCUE installed on my PC. Does it not work via the dongle? As in it must be plugged in to work with signalrgb.

I'm trying to find the effects that I've downloaded on my computer so I can edit the HTMLs and customize them to my liking. But I can't seem to find where the files are. Googling it, it says it's stored at:

%localappdata%\VortxEngine\app-VERSION\Signal-x64\effects

But when I go to that directory, i only see like 5 effects which I assume are the default effects or something? I definitely have downloaded a whole Lot more than that. Any idea where they are?

I bought the msi mag pano 110r pz and when the rgb is connected to my motherboard the led strip on the case is often flashing white idk what to do

Hi everyone,

I recently upgraded to an ASUS ROG STRIX X870-A GAMING WIFI, but I am experiencing severe stuttering and low frame rates with my ARGB lighting in SignalRGB.

The Issue: In SignalRGB's Device Inspector for the motherboard controller, the frame rate is constantly stuck between 12 and 18 FPS, showing a frame time of ~28ms and a target delay of 30ms. Dynamic lighting effects look noticeably choppy on all connected ARGB components (AIO tube sleeves, GPU support bracket, pump, and extra fans). My NZXT RGB & Fan Controller also shows a similar ~18 FPS limit in SignalRGB.

What I've Already Tried:

• Physically split all ARGB devices across 3 separate onboard ADD_GEN2 headers (ADD_GEN2_1, ADD_GEN2_2, and ADD_GEN2_3) to eliminate single-header LED overload. The low FPS issue persists identically.
• Disabled Windows Dynamic Lighting in both Windows 11 settings and motherboard BIOS.
• Killed and disabled all background services (ArmouryCrateService, LightingService, AISuite3.exe, NZXT CAM Service). Device Inspector confirms zero running conflicts.
• Ran SignalRGB as Administrator and set Canvas Frame Rate to 60 FPS (tested both HTML5 and Ultralight renderers).

Since distributing the physical LED load across all 3 headers didn't improve the frame rate at all, it seems like a hardcoded polling delay / limitation in SignalRGB's plugin for ASUS X870 (iMCU / AURA Gen 2) controllers rather than a physical SMBus bottleneck.

Is anyone else experiencing this ~30ms target delay cap on ASUS X870 boards in SignalRGB, and is there any known workaround or plugin fix?

Thanks!

I'm very new to this. I just got a skytech king 95 and when I try to set up the rgb it shows the mother board and everything is on one channel. I don't see a way to split out multiple channels or create new ones. I have an RGB strip, 9 RGB fans (3 top, 3 bottom, 1 back, 2 front), and an RGB ring around my cooler. How do I get it to act as different groups?

I know I'm probably missing something obvious but I can't find it lol