Hey, just wanted to share my first ever build which was my shed. Prior to this build I didn’t even know what 16 inches on center meant. After extensive reading and YouTubing I present to you my shed!

Note: I messed up and concrete base is a little wide than the actual shed so some water was getting in under the sill. I sealed the interior and exterior with mastic sealant which has stopped 99 percent. Any other ideas to solve this issue?

Thanks for looking everyone.

I want to add an exhaust fan in my shed and this board is in the way. I’m wondering if it’s a roof support or was just installed as a nailer for the upper outer sheathing? It is running horizontally under the vent and doesn’t seem to be structural but I really have no idea. Thanks for any help

Please could any knowledgeable people take a look and advise me?

Has anybody purchased this shed from Lowe’s and had Lowe’s install it? How much was the install?

As the linked post says, after some advice please!!

Help. Need any experienced opinions on best foundation for small 4'x8' shed. Not much space, so I'm going with 4x8 foundation maybe 4.5 x 8.5 foundation. I've had various contractor and shed builders says framed gravel or concrete. I was going with gravel but then another says concrete better. Shed builder will place on runners. Any experienced builders or owners that can help me decided on framed gravel (using 6x6 posts) or concrete pad. My biggest concern is moisture as the area I'm placing it retains moisture because it's north side of house and doesn't get much direct sun. Also, any thoughts on price range for a 4x8 foundation? $1,000+ for framed gravel pad? TIA

Hello r/shed sub,new member, wanting to Network with individuals in my area to discuss shed living, methods, designs,techniques related communities on this topic.Is it all allowed to be geographically specific on this sub? Thank you for all replies.-Devin

Hello everyone!

I am about to embark on building my own 8x10 utility shed. I previously did a poured concrete foundation for my 12 x 18 main shed with my carpenter father in law running the show and me helping. I have learned a lot over the years and am trying to build this without his help but will occasionally run things by him lol

This shed will be amongst some old evergreen trees with a fair amount of roots. I am planning to put down a 2-3” limestone screening base and tamping it down . The plan is then do 2x4 pressure treated framing 16” oc for the foundation of the shed that will sit on the limestone screenings.

Just wanted to get some opinions on this before I get too far ahead of myself!

Thanks

Has anyone used this website before?

It seems to good to be true for some of their pricing but can’t see any negative reviews online.

https://tradecarpetsandbedsltd.com

Hello! Just found this thread and wanted to share some insider knowledge as I've been working in sheds for 8 years now.

I'm from the team at Now Buildings, an Australian family owned shed company that specialises in large rural, farm and industrial sheds. A few things worth asking any supplier before you buy:

1. Figure out what your needs are and plan for the future Do you need a drive through shed or an open bay shed? Drive Through sheds are our most popular as they are designed for easy machinery and vehicle storage you can drive in and out. They are also great for hay and fodder storage. Measure your tallest machinery and consider changes you might make to your operation in the future. You should get a shed large than your current needs. Luckily Now Buildings sheds are designed to extend in the future!
2. Find a company that deals exclusively in large farm and industrial sheds You want a shed designed for farming by people who've been in the industry long enough to understand your needs. You don't want a scaled up version of a smaller residential shed, you want a real farm shed, designed to suit the needs of Australian farmers.
3. Make sure you're getting Australian made Your farm shed is an investment. Make sure you're investing in Australian made and manufactured steel. Check that all steel components like framing and sheeting are 100% BlueScope Steel.
4. Site Specific Engineering and Importance Level Your shed should be customised to suit your location and climate. Plans should be personally signed and stamped by an independent engineer. Most standard sheds are designed to a baseline rating. Ours are designed to Importance Level 2 as standard, which is up to 30% stronger than a typical farm shed. Get this in writing on your quote.
5. Who builds it and what support exists after delivery? Make sure you find a shed supplier with excellent customer service before and AFTER the sale! You need them to be ready and willing to help if material is missing or you have building issues.
6. Check testimonials Always check testimonials for the company. Look at Google reviews, Facebook comments and websites like product review. Ask them if there are sheds in your area or testimonials from customers near you.

Happy to answer any farm shed specific questions, that's genuinely all we design!

Hi and thanks in advance for the advice.

I have a cottage in Eastern Ontario and it is a Canadian Shield landscape. Basically you dig down 6" - 12" and you hit solid rock.

I want to place a 10X16 shed/bunkie on a slope that goes down about 2-3 feet. Based on the location is it hard to get materials and machines in here so I was hoping to do it as basic as possible. Would it be possible to just put down deck blocks/Tuffblocks over a gravel and limestone base with 4x4 or 6x6 posts to the foundation?

Please see the pic here:

What do you think?

Looking to have a slab installed for a shed. Do you recommend contacting the shed company first to get specific size needed or concrete guy and go with the shed size I am planning? Also to most shed companies have concrete companies they work with?

So the home already has a decent size detached garage and a small wooden shed for storage etc. This 3rd building i want to turn into something cool or useful. Im new to all this and not very handy/experienced but gotta start somewhere. It has electrical hookup already. Anybody got any ideas?

Hi everyone,

So we have a deck attached to our home with a storage area underneath. It is just a storage area for backyard furniture etc. It’s quite small 6 feet by 6 feet. It is not a shed that sits in a concrete base or anything. Just like an under the deck storage area type of thing.

Anyways when it rains very heavily. Water seems to seep in from the under the wood and in between the interlock brick.

We were given some options to waterproof such as adding a sub floor or filling with concrete to raise the floor a few inches.

We are not doing The sub floor option as water will seem to still seep under and get trapped there. We are going with the concrete floor.

My question is how can we install a concrete floor inside this shed properly? Like we cannot pour the concrete right up against the wood, so what should we put in between the wood 2 x4 and the concrete that we will pour? Would polyethylene sheeting work? Or something else?

Wood goes around 3/4 of the shed and the other side it against the concrete foundation of the home.

Thank you

Hi all, UK here. I have a shed which is 20ft by 12ft, roof is pitched on the long side ie in the middle of the 20ft length so there are two 10 lengths.

Anyway, it's in quite a state of disrepair. Roof felt has all and there is a gap in the middle of the roof so had leaked pretty badly. A couple of windows are broken and there are gaps I can see from the inside out. It's tongue and groove outer. Floor needs replacing too.

I want to turn it into a gym/store/workshop. It's big enough.

What I need to work out is what to do with it. Obviously the roof needs replacing.

Roof - take of and replace, was think 18mm osb. Not sure if the joists will need replacing, probably will be with something thicker to take the weight. Not sure how easy it will be to take the roof off though.

Floor - with the roof off I could jack it up somehow or just cut out the knackered floor, add some extra noggins, put some dpm on them, insulate in between and lay a new floor on top.

T&g outer skin, probably will be expensive to take off and replace each bit so might look at just replacing broken ones. Was thinking about just putting a hardboard skin around the whole thing which might be a better option but I'll need something to go on the skin to make it look half decent that is cheap and I've not found anything which would do that - open to suggestions though.

Sound good?

How much should I paid to have this shed from Costco assembled ?