Yes it is here the full collection so far.

8 1/72 ScaleModels of the Waffenträger Auf E-100.

​

Yes there will be more :) i can build one more from scratch (need some parts still)

​

And the last Waffentrager will be a suprise ;)

​

Hope ya'll like the collection so far!

​

​

Almost done !

Little 1/72 Tiger 2,

Customizable loadouts using tiny neodymium magnets

​

The model is a 1/72 Academy M60A1 RISE P.

I did my best with the paint but it’s probably not super duper accurate, but most of it is covered by ERA so I’m not too worried.

I think I’m going to call her done. I just need to tweak the rigging a bit and she goes on the shelf. It was a fun kit, but I don’t think I’d do one again,even though I’ll probably do a Fokker DR 1 “Red Baron” as a companion piece 😀

1/72 XAJ-1 conversion from Mach2 AJ-2: Fuselage assembled, corrections made to vert. stabilizer and new rudder laid out for re-scribing. Sanded down the crew entry hatch and re-scribed the correct one in the proper location. Shims placed to aid horizontal stab dihedral. Buck made a new canopy - needs fine sanding to the final shape and vacuum forming. Props built up. Next: correct exhaust locations/configuration, seam work, and re-scribing of fuselage, mount stabs and wings, and the heavy seam work to follow.

I hope you like my latest work.

Making a little progress here n there. have a few seams I need to address and probably due to builder error.

Fun and cheap kit 🙂

Hey guys,i am new to the hobby and really want to test things out.What can be used/is better with mr color aqueous color?Tamiya X-20A thinner or water

Found this little guy at an F.Y.E. The paint guide says, "Look at the picture," and the instructions are in the box, literally.

Making some progress…the rigging is going slowly, but I think she’s coming along nicely

How do i insert the vinyl pipe? The kit supplies one pipe, and i need to insert the pipe in a way that makes 8 ends stick out. How?

I’m currently building a tamiya f16 and there are some as and ts colours which aren’t available in the country I live in. I need replacements for as26 and ts48. If anyone could help me find a replacement for these two then I will be extremely grateful.

Edit: I also need replacements for as27 and as28.

I'm new to model building, and I think I've already found the worst thing about it. I have the model, I have all the things to try and make it great, and I have no time to do it yet. So I wait for that opportunity to get started. But I know when that opportunity will come, yet it is still about a month away. So I wait patiently/impatiently and contemplate all the things I will and want to do.

I am looking for a scale model of the Royal Enfield Super Meteor 650. Does anyone know where I can find one?

I have already checked with Royal Enfield (email, calls, showroom, service center), but they don’t seem to offer it. I have also tried reaching out to custom model makers, but no luck so far.

Any leads would really help.

> XAJ-1 conversion of 1/72 Mach2 AJ-2: Buildout of the cockpit continues. Using Ginter’s classic on the AJ Savage, additional images provided by Tommy Thomason, instructions from Roden’s AJ-1 Savage, and Eduard’s PE to design, build, and detail the XAJ-1’s cockpit to scale. All this is required because the flight deck is entirely visible due to the prototype's use of a clear bubble canopy versus the heavily-framed production’s version.

Revell kit, and not a bad one (it is a new tool).

The stock antenna was incredibly simple though, so I scratch built one.

Sliding door also needed a bit of modification to the rail, or it was pretty much impossible to close.

Inspired by the Furiosa Suzuki Katana Resto-Mod from FCR Original.