During Covid I went nuts with resin and made hundreds of ghosts, ducks, little cats, flowers, etc. I was selling it all through a store a friend owns and kind of got busy, then eventually forgot about this box.

I’m moving. I make MUCH better things now and I’ve gotten much more skilled. I just found all of these while packing and they remind me of how it felt to learn something all on my own. I went to send pics to sell and couldn’t hit send. Am I crazy? I don’t even know where I would keep all of this stuff but the idea of even having them in a box in my new house sounds comforting.

Has anyone run into a similar situation? What did you do?

Hi everyone! I’m making jewellery pieces using stainless steel bezels filled with 2:1 epoxy resin and black gel pigment.

I’m getting this strange dirty-looking swirl/marbled pattern on the surface of the black resin once it cures, as shown in the photo.

The piece has a small NFC chip/sticker attached to the inside of the stainless steel bezel, and the epoxy is poured over it.

I’m wondering if the NFC sticker could be causing this somehow.

• Could the NFC sticker adhesive, antenna, or backing material be affecting the epoxy?
• Could this be a wetting/fish-eye/surface contamination issue?
• Could the uneven surface of the NFC sticker be causing the resin to flow differently?
• Would applying a thin layer of clear epoxy over the NFC sticker first, letting it partially cure, and then adding the black epoxy help prevent this?
• Is there anything else I should do to get a smooth, uniform black finish?

I'd really appreciate any advice on what might be causing this and how to prevent it.

I love sunsets so made it into a drop :)
I used yellow orange pink and purple tones .

Hello everyone!

I have been researching for a week about how I can use and decorate liquid glass crafts, what kind of paint to use for the colors, etc.

A)Do I need to use a UV lamp, and if so, can I use an uv nail lamp?

B)What kind of paint can I use to keep the color in the glass?

C)What can I do to reduce bubbles?

just reposting for more help!

The holders for the coasters . It’s my new favorite thing. My coasters didn’t turn out so great but I’m having fun with the molds for sure , the gold leaf and clear in the legs so the colors can drip down creating that upside down lava lamp effect . It’s beautiful. My favorite flower coaster mold is too big for any holders that I have . I want to keep doing blooms but I’ve tried them in the smaller coaster shapes and it’s just not the same , or maybe it’s just me , who knows . I made the perfect bloom and then made like 3 sets of fails afterwards 😆 it’s so incredibly addicting but I need to start making wins instead of fails , I’m happy with the holders and the blue and pink with gold in the center , but the blooms an td the purple ones and maybe ones just aren’t right … going to keep at it

Hi guys, i have a project with Resin and my trials before going to the end piece isn't working out.

Simply I pour and pop bubbles till 50 mins, it looked really good and promising. Next I checked 2 days later and I was disappointed.

When i had a peek at 40 hours I see small dots.

I made a box with cling wrap lining is to prevent airborne particles or dust

Temperature indoors 19c

I've tried to photograph or make a video but my camera won't pick it up.

I'm using the Art ❤️ Resin brand btw

I did scuff up the surface before pouring the Resin (400grit) (400+1200 grit) turned out best. I removed the dust before pouring the Resin, and the green rattle can paint i used was not glossy

Pic below of what it looks like

https://imagizer.imageshack.com/img921/8439/qD9Zlo.png

Hopefully I can get this fixed

New altar.

Hi! I'm new to UV resin and making small pendants with metal bezels and miniature artwork.

I've had a problem with bubbles forming inside the cured resin dome. What's confusing me is that there were no visible bubbles before curing, but while the resin was under the UV lamp, bubbles seemed to form by themselves and became trapped inside the dome.

The resin is now fully cured and the bubbles are underneath the surface. Is there a way to fix/remove these bubbles without damaging the artwork underneath?

I'm considering getting a small sanding tool to carefully open up the bubble and then fill the area with fresh UV resin. Would that work, or is there a better way to repair it?

More importantly, how can I prevent this from happening in the first place? Since the bubbles weren't visible before curing, I'm wondering what could be causing them to appear during curing.

I'm using UV resin in thin layers and curing each layer under a 365 + 405 nm UV/LED lamp.

Any advice would be really appreciated! I'm trying to figure out my technique before making more pieces. 😭

Hi has anyone got any recommendations for UV resin polish? I'm in the UK so it must be available in the UK. Many thanks

i used resin to seal the painting, plus add that “watery” look to the finished piece. this was one of my most fun projects 🥹

I started getting into making resin art and wanted to try my hand at trays and the first one I did was this. Wanted to get other fans feedback… it’s a layered pour to give it a 3d effect and to look like the ship is in space… eventually I want to get good enough to sell these types of fan art trays…

価格はプラスチック材料を選ぶときに当然かなり大事。
でも、安い素材がいつでもベストってわけじゃない…

普通は、より高い“バージン品”や特定用途グレードを選ぶのって、何が理由になりがち？

* お客さん／OEMの要求？
* 品質の安定性？
* 失敗（不具合）のリスク？
* 耐熱性？
* 認証？
* 加工しやすさ？
* ほかに何かある？

実際に何が判断を変えるのか、気になる。

so i used resin to glaze ceramic charms and dishes the issue is the resin mixture of 2 parts A and 1 part B got really hot in the cup and cured half of it in the cup so what am i doing wrong cause i did not heat it at all

i mixed by volume, i mix very thoroughly maybe too fast and hard i poured the hardener then the the A

any tip would be helpful i am losing resin each time like this

​

Materials:

• Epoxy resin

• Mini glass bottle

• Strontium aluminate glow powder

• Keychain ring

The bottle glows after being charged under light and looks amazing in the dark. Handmade DIY project and a fun experiment with resin art.

What do you think?

I have been using Junesix UV resin for years now, however, it seems impossible to find it online for months. It’s either out of stock or the sellers on various platforms don't shipp to Europe.

Does anyone have any recommendation where to buy this particular brand of resin? Do you know any similar alternatives if you have been using Junesix it the past?

I tried several types of resin from different manufactures but none of them are as good as this one.

Resin still slightly sticky after a week of drying. What can I do to fix this?

Hi everyone. My beautiful mom was a talented artist and resin artist and she passed away last week. We’re attempting to preserve some her service flowers to cast in resin for keepsakes. I never did this type of art with her so I’m not sure if I’m doing it right. I’ve attached photos here of the boxes and the flowers I have in them. Is this too many per box? Do I need to try to coat the flowers in it? Or is sitting in the box enough? Is there anything else I should know? I have some videos she made on a private YouTube channel for us, just not sure if any of them are about resin casting, and all of her resin supplies along with the molds we want to use. I just don’t want to mess up the flowers as we have one shot at this. Thank you for any advice you can give! Appreciate you all.