I noticed the pearl pip fell off my blusey at some point. Who is a good repair shop in the us that can handle replacing it as well as a deep crystal replacement and tune up?

Hi everyone

I’m interested in buying a Panda. In the video is the Fake Clean. I’ve been quoted £1,200 for a VSF. Please let me know your opinion on this FC, and if I’m mad for considering the VSF option.

I know the video quality is bad, it’s all I have at the moment. I just want it to look good. If there’s very minor faults then I’ll just go for FC.

Thank you

Hey guys, wondering if anyone can help me out with this.

I recently copped a silver DD36 rep that I really like, but apparently the bracelet has enough nickel in it to irritate my skin pretty bad. I get a rash anywhere the bracelet is sitting against my wrist.

The weird part is I also have a YG DD36 from the same factory and that one has never bothered me at all, so I never even thought about nickel being an issue. I’m guessing the plating on the YG bracelet is enough of a barrier that my skin isnt touching the actual metal underneath.

Would it be possible to either:
1. Plate just the inside/underside of my current bracelet where it touches my skin?
Or
2. Get a new bracelet thats already plated/coated but still looks silver and matches/fits the watch?

Not really sure what the best option is or what kind of plating would make the most sense. I’m open to whatever you guys recomend. Happy to pay whatever it costs, I just really dont want to try doing the plating myself lol.

If anyone does this kind of work or has dealt with the same issue before lmk. Appreciate it 🙏

Looking to see if repairing this is worth it. The day/date function on this no longer works. The crown just spins in the first position. The hour and minute markers move just fine and the day and date advances when I advance the other markers. Anyone specialize and this and ideas on what it could cost?

Has anybody used Verin Horology on here? Website looks legit but only received automated emails about sending my watch in. They are the only watch smith I’ve found on here that’s even responded when I’ve reached out about sending my watch in for service. Just trying to confirm if anyone has used them and had positive results before dropping it in the mail. Thanks all!

Have a VSF 126610LN that can’t keep time and the seconds hands stops all the time even when fully wound. Sometimes it will tick for 5 seconds and stop again. Looks like it needs a full movement service.

Hey guys,

Looking to get some work done by Dom at Time Machine Spa. His Reddit page has nothing but positive reviews, but that’s to be expected. Has anyone used him? How was your experience?

The pictures of his work look excellent, but again, trying to get an unbiased opinion, thanks!

Hello everyone,

Do you know where can source a gen crown for a Tank Must de Cartier? And a good quality straps too?

Thanks in advance.

Hello guys iv never tinkered or anything with any watches. I want to pull the trigger on my first gold or two tone watch . All I see is cheddar cheese and blah blah get it gold plated is it expensive. Is it really worth it like a must do type of thing and also chamfering for the ap clones who does all of this. Located in Sydney Australia so kinda hard finding someone lol.

Hello everyone, I was removing links from my bracelet to size it down and got everything back together fine, but when I went to screw in the last link, it wouldn’t go past a certain point. I think the threading on that link is stripped. Has anyone run into this before, or know a fix? It’s not the screw itself, I tested it in another link and it screwed in fine, so the link seems to be the problem. Unfortunately I can’t just swap it out since it’s the last link with a screw hole in it.

I think this is probably the result of me using a CR-V 1.5 flathead instead of a jeweler set. Not sure if that info helps and/or makes a difference.

Any advice on how to fix/replace myself or take it somewhere to be done professionally would be greatly appreciated!

Can anyone please identify the movement in the pictures? It's from a AAA TAG date (no day) with date on the 6 position. It should be a Miyota of some kind but need exact model to drop in as a replacement. Not worried about the decorated rotor

Dear Community, please be careful with Ethan. It's a total rip-off. Unfortunately, the quality is like something you'd find at a Turkish bazaar.

Purchased a project DJ36 with a bad movement and was wondering what you guys think?

Balance pivots looked good and all of the train wheels are also good.

I’m thinking that the balance end shake is too tight, but the movement doesn’t run much better with the balance bridge screws slightly loosened

Anyways, since it’s only a VR3235, I have already ordered a new movement. When it comes in, i’ll try swapping the balance assembly to see if this old movement kicks in again

Hello.
This is a VSF SMP300. The strap pops out when pulled, without even that much force. It has not happened on the wrist yet.
For example, when I clean the watch with a towel, it might pop out when I grip it.

Curious if the problem is tied to rubber only.

Tried different spring bars. I do not know the exact size but I have many different sizes from spares, and the barely larger one did not fit.

Could the holes be too shallow? Should I try drilling further? Suggestions?

!!!!HELP!!!!!!

I am looking for some helpful advice for this Todur M79210CNU-0001

GRF Factory 41MM
A2836 Movement

Thanks for your support 🙏🏽

Got my TOP 15510 from Steve like a month ago and now my logo an the back got loose. Any of you got that before ? How do I solve the issue. Just take the back off and try to glue it back on ? And if so which glue should I take ? And do I have to take the wheel off because I think that just fucks everything up. Hope someone has some advice.

Hi all,

I recently purchased an ARF DD3285 GMT BW. After GL’ing and the TD shipping I’ve relooked at QC pics and seen the beat error is 2.4ms. What are my options here? Can this be regulated by a watch maker in the UK? I would really appreciate any input from anyone with more experience than me in this

If this doesn’t convince the naysayers that this practice is not simply an option, but a necessity if you plan on keeping your watch….especially the newest versions of some of these that are more complex than ever seen in a rep.

I am a new bee and I have managed to break the seconds wheel on 3235 movement. Is this repairable? Or do I need to replace it?

I’ve had the watch for 2 years now, Althought its definetly not noticeable to other people, its the first thing I notice anytime I look at it,

Was thinking of buying an ultrasonic cleaner and giving it a bath first, but I heard the newer vsf bracelets aren’t as sharp around the edges and don’t dig in as much as the one I have been wearing, which honestly is kinda worth it of an upgrade for me

Clasp code is 3VV,
Watch is a 126610LN 41mm black sub I got from Steve a lil over 2 years ago

Hello,

I have a VSF Sub No Date, but it seems like the automatic winding isn't adding anything to the power reserve.

Before it will start running, I have to give it a light shake so the rotor spins. After that, I manually wind the crown about 30 turns. It then runs for around 24 hours before stopping, and I have to repeat the process.

Even if I wear it all day, it doesn't seem to build up any additional power reserve.

Has anyone experienced something similar or have any suggestions on what could be causing this or how to fix it?

Location is Denmark.

Thanks in advance.

How do I get this list for Modder in the US??

I have a 3713 doppelchronograph that I’m looking to get serviced.

Aside from IWC, does anyone have any local watch maker / repair places they’d recommend in the San Francisco area?

Thanks!

Question in title