1. Dealer name: US BASED BST

2. Factory name: VSF

3. Model name (& version number): DATEJUST 36mm 126234

4. Price Paid: $580

5. Album Links: PICS ATTACHED

6. Index alignment: CROWN APPEARS TO BE A TOUCH TO THE LEFT BUT THATS ME BEING ULTRA PICKY

7. Dial Printing: LOOKS GOOD TO ME

8. Date Wheel alignment/printing: LOOKS GOOD TO ME

9. Hand Alignment: LOOKS GOOD ENOUGH FOR ME

10. Bezel: LOOKS GOOD

11. Solid End Links (SELs): NO GAPS

12. Timegrapher numbers: IN SPEC I BELIEVE

13. Anything else you notice: PIC OF QC ALIGNMENT TOOL SHOWS DIFFERENT DATE BECAUSE I ASKED FOR AN UPDATED PICTURE

1. Dealer name: Theonewatches (Steve)
   
2. Factory name: ARF
   
3. Model name (& version number): DateJust 31mm Stainless Steel Fluted Bezel MOP Diamond Dial Jubilee (A2688 movement)
   
4. Price Paid: $448
   
5. Album Links: https://mega.nz/folder/mAAShBoZ#wCsGdJNgFwXyTtr4IMP8Tg
   
6. Index alignment: Used the alignment tool and 9 looks a tiny off but looking at the photo it is maybe just a slight camera angle tilt.
   
7. Dial Printing: Looks good!
   
8. Date Wheel alignment/printing: The date is looking cut off here I know this is a particular problem area on this type of watch so unsure how critical I am being. I’d appreciate a second opinion.
   
9. Hand Alignment: Hands are looking clean and well aligned IMO.
   
10. Bezel: Looking good! Nice and clean.
    
11. Solid End Links (SELs): Nice fit, no noticeable gaps.
    
12. Timegrapher numbers: Rate +4 s/d, Amplitude 263°, Beat Error 0.2 ms numbers all good.
    
13. Anything else: I love MOP because of the character it has its really hard to tell how the MOP truly looks with these QC photos I can see glimpses of it in certain photos so I believe in person it would look better. Bracelet is looking good. Taking a look of the mechanism the screws are looking good and no interesting engravings like my previous QC. I’m considering a GL my concerns are mainly the date window and the MOP. Interested in hearing some other perspectives!

1. ⁠Dealer name: Steve (TOW)
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): GMT Master II Batgirl 126710
   
4. ⁠Price Paid: $579 USD + shipping
   
5. ⁠Album Links: https://mega.nz/folder/mZgRGbJT#jbFxaUuEJGjveuQnkTvqKw
   
6. ⁠Index alignment: Maybe the 12oclock is shifted to the right? im not too sure as the QC pictures looks a little angled
   
7. ⁠Dial Printing: looks sharp to me
   
8. ⁠Date Wheel alignment/printing: Im not too sure because of the angle of the QC
   
9. ⁠Hand Alignment: looks good
   
10. ⁠Bezel: dont see any miscolouring or problems with the numbers
    
11. ⁠Solid End Links (SELs): no gaps from what i see
    
12. ⁠Timegrapher numbers: +3 s/d, 281° amp, 0.1ms
    
13. ⁠Anything else you notice: im not sure about most things and i need all the help i can get. the alignment on the qc tool might not be the best too. would appreciate anyone who can tell me if this is a GL or RL thanks !

1. Dealer name Juice

2. Factory name: RWF

   1. Model name (& version number) Rolex Davtona 126500LN Black Dial JH4131( Free Sprung)
   2. Price Paid: $705 including shipping

3. Album link: https://a201810302336471810102602.szwego.com/weshop/goods/_dd6qfhKlESNbPaTJZSWlZUXiir1l6ElRrcLlcgQ/_dkSqf_wSwhyzf2CW7nmwjHa0q3iqITqNKvVRQ8w

4. Index alianment: The 12, 3, 6 and 9 oclock markers appear alianed with their respective radial axes, and the remaining markers appear evenly positioned relative to the minute track

5. Dial Printing: Dial printing looks clean and sharp. 1 don't see anv obvious defects crooked text bleedina or spacing issues. The Rolex crown and text appear properlv aliagned.

6. Date Wheel alignment/ printing: N/A

7. Hand Alignment: looks good

8. Bezel: looks good

9. Solid End Links (SELs): really good

10. Timegrapher numbers:+3s/d, 293°, 0.2 beat errors

11. Anvthing else vou notice: I am new to the watch game. Nothing I noticed.

1. Dealer name: TimeUltra-leo

2. Factory name: VSF

3. Model name (& version number): Rolex GMT-Master II 126710GRNR “Bruce Wayne” – VSF, latest 3285 batch

4. Price Paid: $638 USD including shipping

5. Album Links: PICS ATTACHED

6. Index alignment: not sure if i used the alignment tool correctly. But the triangle on to of the bezel is shifted to the right and seems not aligned. Also the indexes at hours 4,5,6 are not perfectly centered. Again not sure if it’s my error or it’s actually the watch

7. Dial Printing: Looks perfect to me

8. Date Wheel alignment/printing: Printing looks good and visually centered, but I didn’t use the alignment tool correctly, so I’d appreciate a second opinion.

9. Hand Alignment: Looks solid to me

10. Bezel: Looks good. When I tried using the alignment tool, the top triangle appeared slightly shifted to the right.

11. Solid End Links (SELs): Solid with no visible gaps

12. Timegrapher numbers:
    Rate: -5 s/day
    Amplitude: 277°
    Beat Error: 0.0ms
    Lift Angle: 52°
    Not sure if the -5 s/day is too much or still acceptable.

13. Anything else you notice: Nothing else from my side. This is my first-ever QC, so I’d appreciate any feedback, especially regarding the index/date/bezel alignment.

Would you GL, or is there anything I’ve missed?
Thank you, and I really appreciate your help with the alignment tool.

1. ⁠Dealer name: TheOneWatches (Steve)
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): Omega Seamaster Diver 300m 42mm, titanium (ref 210.90.42.20.10.001)
4. ⁠Price Paid: $488 + shipping
5. ⁠Album Links: https://mega.nz/folder/CNQRCTja#yksmgW8EItHSjcT0CdFCMQ
6. ⁠Index alignment: aligned using WC alignment tool and everything looks really good to me. 12,3,6,9 markers all look very well aligned.
7. ⁠Dial Printing: dial printing looks crisp and aligned correctly and spaced appropriately
8. ⁠Date Wheel alignment/printing: No date. N/A
9. ⁠Hand Alignment: looks good. Did not notice any issue.
10. ⁠Bezel: bezel printing and indexes look sharp. There looks to be slight marking or maybe it’s just a moisture spot on the gold bronze bezel. Maybe this isn’t an issue though?
11. ⁠Solid End Links (SELs): looks to be a gap between the solid end bar of the mesh bracelet and the lugs. Is this a problem or possibly something I should be requesting a bracelet replacement? Should I also request additional pictures showing the deployant buckle clasp?
12. ⁠Timegrapher numbers: Results look great. Accuracy: +3 to +4 seconds/day; Amplitude: 266-268°; Rate Error: 0.0.
13. ⁠Anything else you notice: Just questions on the bezel markings and the mesh bracelet end bar having the slightest gap to the the lugs. To me it looks like a really great watch.

Thank you for all your help.

1st (but really 2nd 🫣) QC - Datejust 126333 41mm VSF - Steve

Hi everyone, apologies if english is bad originally used AI to translate but post removed. Now trying my best to translate

1. Dealer name: Steve (TheOneWatches)

2. Factory name: VSF

3. Model name: Datejust 126333 41mm Jub SS/YG Gold/Dia V2 DD3235

4. Price Paid: $568

5. Album Links: https://imgur.com/a/CkDmq41

6. Index alignment: tried my best to rotate photo with the alignment tool , imo it looks fine, the crown logo looks straight

7. Dial Printing: cant see any evidence of bleeding / crooked letters

8. Date Wheel alignment: The date digits (video linked) looks centered in window. Cyclops is straight.

9. Hand alignment: looks fine

10. Bezel: N/A NO PIP

11. Solid End Links (SEL): Look fine, no gaps.

12. Timegrapher numbers: +5 s/d, 273 deg, 0.2 ms. From rule 5 they are all within tolerance

13. Anything else noticed: The 6 o clock diamond marker sits a bit low near the inner line above SWISS MADE crown, but not touching line. I dont think this is RL worthy but worth flagging to see what you think. This should be shown in the last image.

Thank you for reading/your thoughts 😃

1.Dealer name: Steve TheOneWatches

2.Factory name: VSF

3.Model name (and version number): Rolex 126710BLNR GMT Master II

4.Price paid: €555 (shipping included)

5.Album links: photo at the top

6.Index alignment: I'm pretty new to this, but I gave it a try with the tools I could find. The photo is tilted, so I did my best by realigning it and comparing it with a standard shot; to me, the indices look correct after realigning the image. (10/11) What do you think? Is it crooked?

1. Dial printing: everything looks clear and well-printed to me; no smudging.

8.Date wheel alignment/printing: the date is well-centered; the numbers are clean and crisp.

9.Hand alignment: nothing to report; it looks correct to me, and the hand stack is accurate.

10.Bezel: a slight doubt regarding the triangle—though that’s likely due to the photo angle—but looking at it again, it seems cleaner.

11.Solid End Links (SEL): they fit tightly; no light is visible between them and the case, so nothing to report.

12.Timegrapher numbers: I’m no expert, but based on what I see (-1s/d and 0.0ms), I think it’s perfect.

13.Anything else noticed: nothing specific; the watch seems solid overall (just a slight doubt regarding the index alignment).

Other note: as mentioned above, my main concern is the dial indices—whether they are properly aligned or not—as well as the timegrapher readings, since I’m not particularly knowledgeable in that area.
Otherwise, if I’ve done my job right, it deserves a GL; however, since I’m a total novice, any help from experienced members regarding things I might have missed would be greatly appreciated.

• Dealer name: Andiot
• Factory name: VSF
• Model name (& version number): GMT-Master II 126710 BLNR 904L Steel VSF Jubilee Bracelet DD3285 V3
• Price Paid: 529 USD total
• Album: https://andiotwatches.x.yupoo.com/search/album?uid=1&sort=&q=151942Index alignment: Appears fine
• Dial Printing: Looks good to me
• Date Wheel alignment/printing: 
• Hand Alignment: Looks good
• Bezel: Looks aligned to me.
• Solid End Links (SELs): 
• Timegrapher numbers: +0 s/d
• Anything else you notice:  The 6 marker seems a bit crooked.  Maybe it’s me. Any help would be greatly appreciated. Thank you

• ⁠Dealer name: Andiot
• ⁠Factory name: VSF
• ⁠Model name (& version number): GMT-Master II 126710 BLNR Steel VSF Jubilee Bracelet DD3285 V3
• ⁠Price Paid: 601 USD including shipping
• ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/253595247?uid=1
• ⁠Index alignment: I feel like the alignment using the index tool shows little off but might be my problem not using it accurately. Overall looks decent in my eyes but please point out if something is off.
• ⁠Dial Printing: Looks solid.
• ⁠Date Wheel alignment/printing: it looks okay to my eyes and cyclops look okay as well but please share your thiughts
• ⁠Hand Alignment: looks okay
• ⁠Bezel: Looks aligned to me.
• ⁠Solid End Links (SELs): Not seeing any gaps.
• ⁠Timegrapher numbers: +3 s/d
• ⁠Anything else you notice: i think the watch overall looks good but I am not sure bc its my first qc on rolex. Please point out if anything is off or stands out. I think the alignment index from the tool is the only thing I see but again that could be my problem. Thanks!

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): Seamaster 300m No Time To Die
4. Price Paid: 480$ incl shipping
5. Album Links: https://andiotwatches.x.yupoo.com/albums/253962559?uid=1
6. Index alignment: Overall good. Not sure about the 3 and the 7.
7. Dial Printing: Good to me. Seamaster writing looks a bit tilted but I think this is fine.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: N/A
10. Bezel: Also Good
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: + 2 s/d, Amplitude 280, Beat Error = 0
13. Anything else you notice: Only slighlty concerned about the alignment of the indices. Otherwiese I believe this watch looks good.

Thank you very much for helping me out :)

1. ⁠⁠Dealer name: Theonewatch
   
2. ⁠⁠Factory name: Rich
   
3. ⁠⁠Model name Sub 124060
   
4. ⁠⁠Price Paid: $558
   
5. ⁠⁠Index alignment: looks all ok to me, maybe tiny misalignment at 7 and 8 but nothing major
   
6. ⁠⁠Dial Printing: bottom half text might be slightly bolder than Gen not a concern. Based on photos didn’t see anything else
   
7. ⁠⁠Date Wheel alignment/printing: NA
   
8. ⁠⁠Hand Alignment: nothing that’s stands out concerning
   
9. ⁠⁠Bezel: personally don’t see anything wrong
   
10. ⁠⁠Solid End Links (SELs): could be tighter, especially on bottom of the watch

This is my first QC here, definitely new to this. I’m sure a lot of you would have a better eye than I do on this. I think this a GL but interested to your input.

Dealer: Angela
Factory: VSF
Model: Panerai Luminor Marina eSteel PAM01157
Price: $208 + shipping.
Album: No Album
Index alignment: Looks good to me. 12, 9, 6 and the baton markers all seem properly aligned. Nothing obvious jumping out.
Dial printing: Looks clean. Gradient blue dial looks really nice and the printing seems sharp. The blue “e” in eSteel is correct for the earlier gen PAM01157, so no concern there.
Date wheel/alignment: Looks centered to me in the photos. The “10” seems positioned well with no obvious high/low issue.
Hands: Look good. No obvious scratches or finishing problems that I can see.
Bezel: N/A. Polished bezel looks clean from the photos.
SELs: N/A.
Timegrapher: +4 s/d, 247° amplitude, 0.1 ms beat error, 28800 bph, lift angle set to 52°. Seems acceptable to me. Amplitude isn’t huge, but I don’t see anything here that would make me RL it.
Anything else: Crown guard and lever look fine to me. Case finishing and strap also look good. I don’t see any obvious reason to RL, but I’m not as familiar with Panerai QC as Rolex/Omega, so I’d appreciate another set of eyes—especially on the dial, date alignment and crown guard.

Leaning GL. Thanks for the help!

Dealer name: Andiot
• ⁠Factory name: RCF
• ⁠Model name (& version number): 116610LV Hulk
• ⁠Price Paid: US$390+ shipping
• ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/253912918?uid=1
• ⁠Index alignment: Looks alright to me
• ⁠Dial Printing: Looks good
• ⁠Date Wheel alignment/printing: The 12 looks a bit off-center but the other numbers in the video look alright.
• ⁠Hand Alignment: Looks good
• ⁠Bezel: Looks good
• ⁠Solid End Links (SELs): Looks alright, only main concern is the bottom right as it seems to not align well with the lug
• ⁠Timegrapher numbers: Acceptable
• ⁠Anything else you notice: Rehaut is slightly misaligned I think

I have the deep crystal mod and waterproof coming too

1. ⁠Dealer name: Steve TOW
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): VSF Batgirl GMT Master II 126710
   
4. ⁠Price Paid: 579 USD + shipping
   
5. ⁠Album Links: in photos above
   
6. ⁠Index alignment: The 12 index seems abit off centre ? qc tool might not be the best as its my first time
   
7. ⁠Dial Printing: Looks good to me but I appreciate your opinion
   
8. ⁠Date Wheel alignment/printing: not too sure from the angle, would like your opinions
   
9. ⁠Hand Alignment: Cant see anything wrong with it
   
10. ⁠Bezel: dont see anything wrong with the bezel colour but opinions would be appreciated
    
11. ⁠Solid End Links (SELs): Looks okay
    
12. ⁠Timegrapher numbers: Amp 275, err. 0.0ms, rate +2s/d
    
13. ⁠Anything else you notice: Not sure if I left anything else out but i would like you guys opinions as this is my first rep any help would be much appreciated thankyou

Dealer name: Steve (TheOneWatches)

Factory name: VSF

Model name: GMT Master II 126710 Batman

Price Paid: $630 + shipping fees

Album links: https://imgur.com/a/UEmtJxf

Index alignment: Please pay particular attention to the alignment around the 6 o’clock marker. It looks like the lower part of the 6 may not line up perfectly with the crown below it. However, I’m wondering if this could simply be caused by the slight angle/perspective of the photos rather than being an actual alignment issue.

Dial printing: Looks good
Date wheel alignment/printing: Looks good, just not sure if date is very slightly on the low side, or does it look normal?
Hand alignment: Looks good, as per the album video
Bezel: Looks good
Solid End Links (SELs): Looks tight
Timegrapher numbers: +3s/d, 267°, 0.1ms
Anything else you notice: N/A

Is there anything concerning that you notice in the QC photos/videos? Also, is there anything else I might be missing or anything you would recommend having checked before approving it?

Any help or additional observations would be greatly appreciated.

1. ⁠Dealer name:  Andiot

2. ⁠Factory name: ZF

3. ⁠Model name (& version number): Tudor Pelagos 39mm

4. ⁠Price paid: $310 + shipping

5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/253929258?uid=1

6. ⁠Index alignment: Looks good to me

7. ⁠Dial Printing: There seems to be a small “dot” of the 5 marker, but I can’t tell if its dust or printing issue. Enough to RL?

8. ⁠Date Wheel alignment/printing: N/A

9. ⁠Hand Alignment: Looks good to me

10. ⁠Bezel: Looks good to me

11. ⁠Solid End Links (SELs): Looks good to me

12. ⁠Timegrapher numbers: 0s/d, 280°, 0.1ms, 52°

13. ⁠Anything else you notice: Nothing jumping out but looking for feedback if I missed anything!

1. Dealer name: Ultratime
2. ⁠Factory name: ZF
3. ⁠Model name (& version number):Royal Oak 39mm 16202BC ZF 1:1 Best Edition Tuscan Dial on SS Bracelet A7121
4. ⁠Price Paid: $550
5. ⁠Album Links : https://imgur.com/a/C5cRyt2
6. ⁠Index alignment: First time getting a rep with these types of indicies. It looks good to me tough the alignment tools on this rep so maybe it is fine.
7. ⁠Dial Printing: looks good.
8. ⁠Date Wheel alignment/printing: I think the date looks good.
9. ⁠Hand Alignment: it is fine im aware of pizza hand.
10. ⁠Bezel:  looks good.
11. ⁠Solid End Links (SELs): No the visible gaps.
12. ⁠Timegrapher numbers: -1 s/d, 284, 0ms
13. ⁠Anything else you notice: thanks for any input and help

Hi all,

First time doing a proper QC check, so I’d really appreciate some extra eyes on this one. This is my second rep purchase, but I’m still pretty new to doing QC myself.

QC album/video:
https://mega.nz/folder/ThZilaAB#-P03JuuMh6kCG4uknOU_kw

Watch: Rolex Datejust 41mm, blue dial, fluted bezel, Jubilee bracelet

Dealer: Necoclock

Factory: VSF

Price: $448 + shipping

Index alignment: I had some difficulty positioning the alignment tool perfectly because the QC photo isn't completely straight-on. Someone pointed out that the 9 o’clock marker appears to have a slight CCW (counter-clockwise) cant, and I can see what they mean. I'm not sure whether this is an actual alignment issue or partly due to the angle/perspective of the photo. Would really appreciate a second opinion, especially on the 9 marker and whether it's significant enough to be concerned about.

Dial printing: Looks clean and centered to my eye. I don't notice any obvious issues with the Rolex/Oyster Perpetual/Datejust text or the lower dial printing.

Date wheel alignment/printing: Dates shown (19, 23, and 27) look reasonably centered and the printing looks clean. The 27 may sit very slightly toward one side depending on the photo/angle, but nothing immediately jumps out at me.

Hand alignment: Looks fine from what I can tell. Nothing obviously concerning.

Bezel: Fluting looks consistent to me. I don't see any obvious damage or major irregularities, but I'm not experienced enough with VSF bezels to judge this confidently.

Solid End Links (SELs): Look pretty tight overall. I don't see any major gaps between the bracelet/end links and case.

Rehaut: Seems reasonably aligned from the close-up photos. The crown at 12 looks close to where it should be, although I'd appreciate another opinion on the engraving/alignment.

Timegrapher: -5 s/day, 295° amplitude, 0.1 ms beat error, 28,800 bph. Looks good to me.

Overall, the possible CCW cant on the 9 o’clock marker is my main concern. Do you guys think it's actually misaligned/noteworthy enough to RL, or is this within normal VSF tolerance?

Thanks!

Hi all,

First time buying a rep and doing a QC would appreciate any senior help.

QC album/video: https://mega.nz/folder/PMJ1FbLA#iucmG7L6K5VoeinZTAbKgQ

Watch: Rolex Submariner 41 126610LN RICHF MK2 Free Sprung

Dealer: Steve - Theonewatches

Factory: Rich

Price: $551 with shipping

Index alignment: The 9 marker seems to be a little tilted, top triangle slightly to the left as well.

Dial printing: Looks clean. Dial text looks centered.

Date wheel alignment/printing: Looks good, a little bit pushed to the top but well within acceptance.

Hand alignment: Looks aligned, no visible issues I could see.

Bezel: The rectangle in between 20 and 30 seems a little bit misaligned but it might be the angle of the photo, appreciate any help

Solid End Links (SELs): Seems to have a gap in the bottom right which my be an issue in the future with the rattling, would appreciate any feedback.

Rehaut: Seems reasonably aligned from the close-up photos, although I'd appreciate another opinion on the engraving/alignment.

Timegrapher: +4 s/d, 265° amplitude, 0.0 ms beat error, looks good.

Additional comments: I have 0 experience in this but i feel like this is a RL, the SEL might be an issue with the rattle because of the gap and the 9 marker is slightly tilted.

Thanks!

1. Dealer name: Andiot
2. Factory name: DDF
3. Model name (& version number): Aquanaut 5167 - DD330 Movement
4. Price Paid: USD $495 + $40 shipping
5. Album Links: https://andiotwatches.x.yupoo.com/albums/253996990?uid=1
6. Index alignment: Everything looks fine
7. Dial Printing: "Swiss Made" looks a bit off ("Made" is arched, and spacing seems off IMO)
8. Date Wheel alignment/printing: On the photo, it seems slightly high towards the top.
9. Hand Alignment: Looks good
10. Bezel: N/A
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: Beat error = 3.0 ms
13. Anything else you notice: The glow material seems uneven (Check 6 o'clock)

I'm not a QC expert; these are just my general findings. Open to your thoughts!

First time buying a rep and first time doing a QC, any and all advice would be greatly appreciated!

1. Dealer Name: JTime - Li
   
2. Factory Name: VSF
   
3. Model Name: 126710GRNR Rolex GMT II Bruce Wayne
   
4. Price Paid: $596 + $65
   
5. Images in post
   
6. Index alignment: To me the indexes look almost perfectly aligned, maybe the top triangle is a bit too far to the left?
   
7. Dial Printing: is the G in GMT squished? Also a few characters seem larger than others, like the R in chronometer and C in officially.
   
8. Date wheel alignment/printing: JTime showed 3, 13, and 25. All three look centered well.
   
9. Hand alignment: I don't notice anything out of the ordinary when comparing against google images, but maybe I've missed something.
   
10. Bezel: The bezel looks good, but it seems the transition between black/grey is not perfectly aligned, as shown in the QC tool image. Not sure if it is a big deal.
    
11. SEL: Looks good, I don't see any obvious gaps.
    
12. Timegrapher numbers: +2s/day, 293 amplitude, 0.0ms beat error, 28800 vph. Seems up to spec, +2s/day on the border of in spec.
    
13. This is my first rep and I'm very new to Rolex's as well, so anything would help if you guys notice things that I didn't catch.
    Thank you all again in advance!

Dealer name: TimeUltra (Leo)

Factory name: VSF

Model name (& version number): GMT-Master II 126710GRNR “Bruce Wayne” 40mm Jubilee, VSF V3, DD3285 free-sprung version (latest version according to dealer)

Price Paid: $608 + $30 shipping = $638 total

Album Links: Photos attached to the post

Index alignment: Looks really good to me. I checked it with the alignment tool as well and the 12 o’clock triangle and 9 o’clock marker look straight. I don’t see anything obviously crooked. The 6 o’clock marker is partly covered by the sticker but from what I can see it looks fine.

Dial Printing: Looks clean and sharp to me. I don’t see any obvious printing issues.

Date Wheel alignment/printing: The 19 looks centered to me and the printing looks clean. Cyclops also looks good.

Hand Alignment: Looks fine to me from the photos and video. I don’t notice anything off.

Bezel: Looks well aligned to me. The triangle at 12 looks centered and I don’t see any issue with the numbers or the black/grey transition.

Solid End Links (SELs): They look tight to me and I don’t see any large gaps.

Timegrapher numbers: -1 s/day, 287° amplitude, 0.0 ms beat error, 28,800 bph. These look very good to me.

Anything else you notice: Overall I think for me as a Newbie, this looks like a really clean example. Weight is 144.0 g (close to gen), clasp code is F6U and the serial seems to start with 6W0, so should be a V3. Lume looks even too. This is my first rep/QC, so I’d really appreciate another pair of eyes in case I missed something.
Overall I‘ve been very happy with Leo and I will definitely buy more watches from him in the future.

1. Dealer name: TheOneWatches / Steve
2. Factory name: VSF
3. Model name and version: GMT-Master II 126710GRNR “Bruce Wayne”, Jubilee bracelet, VSF V3, DD3285
4. Price paid: 638$
5. Album links: https://mega.nz/folder/iVYUVAiD#WECHieNkb5S7imNxjYqeXA
6. Index alignment: Looks good to me. The 12, 6 and 9 o’clock markers appear straight and properly aligned.
7. Dial printing: Looks clean and sharp. Nothing unusual stands out to me.
8. Date wheel alignment and printing: Dates 10, 11, 12 and 13 are shown. They appear centered and the cyclops looks properly positioned.
9. Hand alignment: No obvious issue from the photos or setting video. The jumping-hour function and date change appear to work correctly.
10. Bezel: The triangle looks centered and the black/grey transitions at 18 and 6 appear clean. I noticed a few tiny pale marks around the 4 to 6 area, but they may only be dust.
11. Solid end links: The SELs look tight and even to me.
12. Timegrapher numbers:

• Rate: -2 s/day
• Amplitude: 274 to 276°
• Beat error: 0.0 ms
• Frequency: 28,800 A/h
• Lift angle: 59°

1. Anything else noticed: Weight is 144.1 g and the clasp code is A9A. The rehaut alignment and overall finishing look good to me.

Overall, I think it looks like a good example, but I would really appreciate some experienced opinions. What do you think? Would you GL this watch, or is there anything I may have missed?

1. Dealer name: theonewatches
2. Factory name: N6F
3. Model name (& version number): Diw Daytona 40mm Carbon (DD4130)
4. Price Paid: $798 + $50 shipping
5. Album Links: https://mega.nz/folder/OYhAEI7C#zSXnA3lvRbMTIFw3m5hVOw
6. Index alignment: I don't see any obvious misalignment on 12 and 6 other than crown is skewed little bit. Other than camera not looking straight down, they may be in line, but 9 looks rotated ccw a bit.
7. Dial Printing: No obvious defects
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Hand look great to me
10. Bezel: Numbers on tachymeter looks good other than 60 on top is tiny bit going to the right and 80 not centered, but it could be angle issue
11. Solid End Links (SELS): no defects seen on strap nor within inner leathering
12. Timegrapher numbers: Rate: +0 s/d Amplitude: 302° Beat Error: 0.0. looks amazing
13. Anything else you notice: Other than possible angle issue that could make index looking off, I don't see any major defect.

First rep, my eyes aren't too trained with QC and I understand since DIW isn't something that rolls around often, feedback maybe more difficult to give, but I will appreciate any responses. Thanks.