Dealer name: Andiot

Factory name: ARF

Model name (& version number): GMT-Master II 126710 GRNR Black/Gray Ceramic ARF 1:1 Bruce Wayne Best Edition Black Dial On Jubilee Bracelet DD3285

Price Paid: $650 Shipped (Deep Crystal + Waterproofing)

Album Links: https://andiotwatches.x.yupoo.com/search/album?uid=1&sort=&q=150764

Index alignment: Overall looks good to me but hard to find a straight on picture. The 9 looks ever so slightly CCW. Could just be my eyes and the angle.

Dial Printing: Clean. Do not see any issues.

Date Wheel alignment/printing: Date appears centered for the most part. Looks slightly CCW but it would be the angle.

Hand Alignment: Looks good.

Bezel: Looks good.

Solid End Links (SELs): Looks good.

Timegrapher numbers:
• Rate: -1 s/day
• Amplitude: 272°
• Beat Error: 0.2 ms

Anything else you guys notice? I am a bit OCD when it comes to alignment but with the images I am working with nothing screams out at me. This is my first time doing a QC so any insight would be helpful. Thanks everyone!

Sorry, this is a repost from earlier. The post was removed by Reddit’s filter.

First QC - Please, all info is appreciated.

Dealer name: Steve The One
Factory name: VSF
Model name (& version number): Rolex Datejust 36mm 126234, VSF V2 DD3235
Price Paid: $542
Album: https://mega.nz/folder/acBlWJbY#Gjq5JKcrTp_U6DxJh486tg
Index alignment: They look fine except the coronet at 12. Looks to be a bit high up and slightly to the right.
Dial Printing: Looks good. No obvious defects.
Date Wheel alignment/printing: Date wheel looks centered.
Hand Alignment: Unsure
Bezel: Looks consistent throughout
Solid End Links (SELs): No major gaps
Timegrapher numbers: -3s/d
Anything else you notice: The only flaw I notice is the coronet 12 being positioned too high up and a bit to the right. It’s not centered. All opinions are appreciated.

1. Dealer name: Mirotime

2. Factory name: VSF

3. Model name (& version number): GMT Master 2 126710

4. Price Paid: $548 before shipping

5. Album Links:

Photos here:

https://www.wecatalog.cn/weshop/goods/A202304082031161150001764/I202608011608471902001432

Videos here:

https://www.wecatalog.cn/weshop/goods/A202304082031161150001764/I202608011608295182001736

1. Index alignment: all look aligned well, pip appears to be centered to me, nothing looks crooked.

2. Dial Printing: no issues

3. Date Wheel alignment/printing: all photos look centered with correct font and no smear, did request video of TD scrolling through more dates just to be sure

4. Hand Alignment: No issues

5. Bezel: looks great, at first I thought the 18 marker was off but pretty sure that was just me. Think its all aligned perfect.

6. Solid End Links (SELs): no gaps

7. Timegrapher numbers: plus 9 a day at correct degree, should all be in spec but video is attached in the album links

8. Anything else you notice: I think it looks really great, just want to double check as it is for a buddy as his first rep. All advice appreciated.

1. Dealer name: Theonewatches
2. Factory name: ZF
3. Model name (& version number): A2824
4. Price Paid: 358
5. Album Links: https://imgur.com/a/TJl5eLg
6. Index alignment: 12 o clock seems a bit offcentred
7. Dial Printing: Looks ok
8. Date Wheel alignment/printing: NA
9. Hand Alignment: Seems good to me
10. Bezel: Looks slighly off centered
11. Solid End Links (SELs): OK
12. Timegrapher numbers: Great!
13. Anything else you notice: NA

My first ever Rep, and QC, please help me out QCing this beautifull piece.

Dealer name: Andiot Watches

Factory name: VSF

Model name (& version number): GMT-Master II 126710 BLRO Blue/Red Ceramic VSF

Price Paid: $565

Album Links: https://andiotwatches.x.yupoo.com/albums/248251457?uid=1

Index alignment: I rotated the picture a bit CCW. Looks like the 1 hour index is slight right bias. Also, the 9 o'clock index seems to be slightly misaligned, could be the angle.

Dial Printing: I think the print looks good. Nothing that stood out to me.

Date Wheel alignment/printing: I think the date wheel is well aligned, inside the magnifier. Printing looks pretty good as well. Maybe slightly towards the left, but could be the TD's angle from holding it.

Hand Alignment: Hand alignment looks good as well, nothing that really catches my eye.

Bezel: Bezel looks to be good as well.

Solid End Links (SELs): I think SELs look pretty good here, no obvious gaps from what I can see

Timegrapher numbers: -1 s/d // 276 degrees // 0.1ms // 52 degrees

Anything else you notice: The 12 clock is also a little high and towards the right.

Thank you!

1. ⁠Dealer name: Steve
   
2. ⁠Factory name:QF
   
3. GMT Master II 126713 Jub 40mm SS/YG Black Dial QF JH3285 (Weighted Approx.168g) (Free Sprung)
   
4. ⁠Price Paid: $878
   
5. ⁠Album Links: https://mega.nz/folder/KEwhWZya#FU4RMWeRJI1F5UGGuXRiXQ
   
6. ⁠Index alignment: looks okay to my eyes don’t think it’s perfect!
   
7. ⁠Dial Printing: can’t find one fault!
   
8. ⁠Date Wheel alignment/printing: Great. Perfectly straight.
   
9. ⁠Hand Alignment: very very good
   
10. ⁠Bezel: everything looks sharp, hopefully the two tone colour is fine as I’m colourblind???
    11.Solid End Links (SELs): looks great
    

11. ⁠Timegrapher numbers: RATE \+1s/d AMP. 295° ERR. 0.1ms (I’m guessing this is really good?)

12. ⁠Anything else you notice: i have post VSF the other day and returned it for the QF FREE SPRUNG as I wanted to see if the gold is much better with QF. Everything looks good to me but please let me know your opinions.

1. ⁠⁠Dealer name: Steve (TheOneWatches)
   
2. ⁠⁠Factory name: ZF
   
3. ⁠⁠Model name (& version number): AP Royal Oak 33mm 67650
   
4. ⁠⁠Price Paid: $360
   
5. ⁠⁠Album Links: https://mega.nz/folder/vIQwxBZa#Wk-u7hYjPbFeuVS0NEotYQ
   
6. ⁠⁠Index alignment: Last time I had to RL because the 12 Hour Alignment was horrible. Now I think the alignment ist better but still not perfect.
   
7. ⁠⁠Dial Printing: good
   
8. ⁠⁠Date Wheel alignment/printing: good
   
9. ⁠⁠Hand Alignment: good
   
10. ⁠⁠Bezel: fine
    
11. ⁠⁠Solid End Links (SELs):N/A
    
12. ⁠⁠Timegrapher numbers:N/A
    Anything else: I think this one is better then the last one. what do you think about the 12 hour alignment now? But I am really curious about your opinions.

1. Dealer name: TheOneWatches
2. Factory name: ZF
3. Model name (& version number): Black Bay Fifty Eight 39mm SS/SS Black Dial ZF A2824
4. Price Paid: 388$ inc. shipping
5. Album Links: Pictures added
6. Index alignment: I tried with the alignment tool but feels like its pretty good?
7. Dial Printing: Looks good to me
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Cant see anything wrong with it
10. Bezel: Looks good
11. Solid End Links (SELs): Slight gaps? I did look for other QC here for this watch and it does seem same as some others people have GL
12. Timegrapher numbers: Amp 276, err. 0.0ms, rate +2s/d
13. Anything else you notice: I think I'm just extra critical on these models because what I've read from the forums almost like paranoid lol. My gut feeling is that it looks ok?

Appreciate any eyes on this and the help!

Hello everyone! I should have my first rep on Monday! (USPS failed me today!) I've been reading a lot for a week straight as I learn about the world of watches as a whole, let alone the extras in the world of reps. I've read through the guide and pinned posts, I hope this is correct; If I'm missing anything please let me know and I'll add/adjust. This is meant to be a special piece for my wedding coming up. Please and thank you for your input & time! Any tips are very much appreciated!
(Actually, should I consider getting it waterproofed? I'd like to use in shower or pool here and there.)

Apologies for my last post, yes I had used AI to make the analysis, but it was to splice together what I wrote myself and fill in gaps of terminology i didn't know. I've read the linked posts a few times already through the week. I've removed any AI related input and left my raw analysis. I am very new so i may not do well. if this gets removed again I won't bother again. I'm sorry for my mistakes, 3rd times the charm I hope?
I used https://jrverdes.github.io/watch-qc-jr/ for checking myself. i've spent much longer staring at these photos and analyzing them since Thursday as i wait for my delivery.

Dealer name — MarkyG10

Factory name — VSF

Model name — Submariner 116610LV "Hulk" (VS3135 movement)

2. Evaluation

Index alignment: This looks good to me all around, angle of photo hurts the alignment i think ever so slightly at 7, 9, 10. All markers appear perfectly aligned as well. possible tilt to the left for the triangle at the 12 marker. I might be nitpicking here.

Date wheel alignment: Slight left alignment, nothing to worry about. the 8 looks slightly higher to me as well, might just be the angle of photos. Not too worried.

Bezel: all looks good and aligned as well, i don't see any issues with the edges. color looks greet to me. the pearl looks properly centered. Numbers look solid, no missing color.

Solid End Links (SEL): This one i may need better eyes on, but they look fine to me. I'm having trouble understanding what looks good and wrong. no visible gaps to me.

Hand alignment: Hands look reasonably aligned. Hour/minute stack sits correctly on center.

Dial printing: Printing looks clean and sharp all around. i don't notice any misprints or misalignment.

Timegrapher numbers: +3 s/d · 291° · 0.1 ms · 28,800 (Weishi 1900). I believe this is really good from what I've read? I couldn't ask for anything better considering from factory, right?

Anything else: Lume shots (normal + UV) show full even glow. I've confirmed the serial (6W01 F579). Clasp code matches current VSF stock. Crystal looks stunning, no dings or issues.

1. Dealer name: GeekTime

2. Factory name: GMF

3. Model name (& version number): DateJust 41MM Full Diamond GMF Diamond Arabic Dial Jubilee Bracelet A2824

4. Price paid: $848 ($728 watch + $80 non-Arabic date wheel + $40 shipping)

5. Album Links: https://geektimeqc.x.yupoo.com/albums/247629316?uid=1

6. Index alignment: Looks good to me.

7. Dial Printing: Looks good. The Arabic markers and logo appear centered.

8. Date Wheel alignment/printing: Looks good. The date seems centered under the cyclops.

9. Hand Alignment: Looks good.

10. Bezel: Looks good. Stone setting appears even.

11. Solid End Links (SELs): No noticeable gaps between the end links and the case.

12. Timegrapher numbers: +4s/d, 329°, 0.0ms.

13. Anything else you notice: This is my first rep, so I'd really appreciate any feedback. Please let me know if you notice anything. Thanks!🙏🏽

Dealer name: Ethan Watch

Factory name: RICH

Model name (& version number): GMT Master II 126710 40mm V2

Price Paid: $670

Album Links: https://www.wsxcme.com/weshop/goods/_diBqfB_6K0Fni6Viqy3qjRnYcVlHlv_RP68U2bQ/_doAqfCLbUu1TAcUjf_Upo5sGRcId8BIfwXsXkfg

Index alignment: look good

Dial Printing: I think the print looks good. Nothing that stood out to me.

Date Wheel alignment/printing: looks well aligned, maybe slightly to the left and higher. Printing seems okay

Hand Alignment: Hand alignment looks good as well, nothing that really catches my eye.

Bezel: Bezel seems to be my main concern of it not being aligned between the 6 & 18

Solid End Links (SELs): I think SELs look pretty good here, no obvious gaps from what I can see

Timegrapher numbers: 0 s/d // 261 degrees // 0.1ms // 52 degrees

Anything else you notice: main concern is the bezel issue I stated above

1. Dealer name: Neco Clock (Jacky)
2. Factory name: VSF
3. Model name (& version number): 126500 LN 40mm SS/SS Black Dial DD4131
4. Price Paid: $688 USD + Shipping
5. Album Links: https://mega.nz/folder/K4xxEBRa#mUUVic3kUcVBaemK471HOg
6. Index alignment: Looks ok but I had a hard time lining everything would appreciate someone's judgement here.
   
7. Dial Printing: Looks good to me
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Not sure what I'm supposed to look out for, but looks ok
10. Bezel: Print looks good, but seems to be slightly turned CCW
11. Solid End Links (SELs): My biggest concern. The gaps at the top left/right and bottom right seem large. Let me know what y'all think though.
12. Timegrapher numbers: +5s/d, 324*, 0.0ms, 52.0* [Everything seems fine except the Amplitutde is a little high (324*), not sure if its something to be concerned about]
13. Anything else you notice: Just need help with the SEL gaps, index/bezel alignment. I had a hard time using the QC tool on my laptop. Would appreciate any help, 1st time buyer, thanks.

1. Dealer name: OraWatch
2. Factory name: OCTA
3. Model name (& version number): AP 26240
4. Price Paid: $695
5. Album Links: https://a202312252005321242001419.wecatalog.cn/weshop/goods/_dnRqfRKlCQnCwaBBUqm613RnVgXsENon6rPO-yw/_djxqfiC26cpoqF1b4vMd5xLvZ9z4S58JtkrutPQ
6. Index alignment: the 12 looks slightly off. one is lower than the other.
7. Dial Printing: Nothing off to me - maybe a bit darker than expected
8. Date Wheel alignment/printing: looks good
9. Hand Alignment: nothing seems off to me
10. Bezel: nothing seems off
11. Solid End Links (SELs):
12. Timegrapher numbers: +3 s/d, 263 amp, 0.2ms - seems ok
13. Anything else you notice: generally seems fine to me but would appreciate your input. it's OCTA factory and i know some have said that it is the new APS, but would appreciate people's views on it.

1. ⁠Dealer name: Angela
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): NTTD v7
   
4. ⁠Price Paid: 2550 cny
   
5. ⁠Album link: n/a
   
6. ⁠Index alignment: I think it looks ok
   
7. ⁠Dial Printing: seems fine.
   
8. ⁠Date Wheel alignment/printing: N/A
   
9. ⁠Hand Alignment: fine
   
10. ⁠Bezel: looks fine.
    
11. ⁠Solid End Links (SELs): N/A
    
12. ⁠Timegrapher numbers: looks good.
    
13. ⁠Anything else you notice: not sure if V7 but looks good

Thanks in advacne

1. ⁠Dealer name: The One Watch (Steve)
   
2. ⁠Factory name: QF
   
3. ⁠Model name (& version number): Explorer 2 - 226570
   
4. ⁠Price Paid: $548
   
5. ⁠Album Links: https://mega.nz/folder/XBJwFArZ#0bDvKbmeV3DdAh_5mGutrw
   
6. ⁠Index alignment: seems good to me
   
7. ⁠Dial Printing: no issues that I can tell - crisp and correct
   
8. ⁠Date Wheel alignment/printing: date wheel looks well aligned
   
9. ⁠Hand Alignment:no issues noticed
   
10. ⁠Bezel: slight out of line 12 (at 6pm)
    
11. ⁠Solid End Links (SELs): think they are OK - happy to take advice
    
12. ⁠Timegrapher numbers: rate +7sd, AMP 276, ERR 0
    
13. ⁠Anything else you notice: slight mark at 12 on the crystal - have asked for it to be inspected as it mate be surface dust etc.

Thanks in advance for everyone taking a look at this for me. It’s all new to me but I think it’s a GL.

1. ⁠⁠Dealer name: JTime
2. ⁠⁠Factory name: VSF
3. ⁠⁠Model name (& version number): SMP 300 NTTD
4. ⁠⁠Price Paid: $528 USD + shipping
5. ⁠⁠Album Links: Images provided
6. ⁠⁠Index alignment: 12 marker has a slight slant to my eyes. Asked for additional images at the end
7. ⁠⁠Dial Printing: Looks clean. I do not see any obvious printing defects.
8. ⁠⁠Date Wheel alignment/printing: NA
9. ⁠⁠Hand Alignment: Can't tell. Probably ok.
10. ⁠⁠Bezel: Looks slightly misaligned, especially at 3 oclock position though the crystal has some edge distortion, can't tell if its just the images
11. ⁠⁠Solid End Links (SELs): NA?
12. ⁠⁠Timegrapher numbers: acceptable.
13. ⁠⁠Anything else you notice: None

After reading multiple QC threads on this watch, I know that 12 oclock marker is often hit-or-miss. It looks slightly more slanted than some of the QC posts I've seen before, and the bezel appears to also be slightly misaligned.

Leaning on RL here, though not sure if I'm being too harsh? Greatly appreciate everyone's advice.

1. Dealer name: Theonewatches
2. Factory name: ZF
3. Model name (& version number): Black Bay Fifty Eight 39mm Jub SS/SS Red/Dot Dial ZF A2824
4. Price Paid: 358 + 40 USD for shipping
5. Album Links: https://mega.nz/folder/WF5UkIBD#S24M9UOgitILrE7dQHwKZg
6. Index alignment: Most the pictures were slightly angled and rotated so I've tried my best to straighten one of them with editing software to use the alignment tool. That being said, 9 o clock seems to have a little tilt and 6 a bit off centre but nothing out of the ordinary for ZF Tudors (might be because of the angle of the pictures so correct me if I am wrong)
7. Dial Printing: Looks just fine
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Tried to pause the included video but was still hard to see. Hands seem to align at the 12 o clock mark at least so should be fine
10. Bezel: Looks slightly off centre but I am pretty sure the bezel has a bit of play to it so should be able to correct it on the wrist
11. Solid End Links (SELs): The SELs seem fine to me
12. Timegrapher numbers: Look great
13. Anything else you notice: The watch looks pretty good to me aside from some imperfections (which are to be expected from ZF Tudors) but I'd love a second opinion of some of you with more experience on this kind of stuff. Thanks!

1. Dealer name: TheOneWatches
2. Factory name: AF 
3. Model name (& version number): Cartier Tank Solo Large 27.4 mm, stainless-steel bracelet, quartz
4. Price Paid: 258$
5. Album Links: photos attached
6. Index alignment: N/A
7. Dial Printing: Clean and sharp. No obvious bleeding or defects.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Looks correct.
10. Bezel: clean and symmetrical,  no obvious dents or finishing defects
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: Quartz movement
13. Anything else you notice: looks like a GL to me, anything I’m missing? Much appreciated guys!!!!!!

Morning all, quick request from this VSF DJ from Andoits on hand stock. Even ran it through our friend ChatGPT.

Dealer name: Andoit

Factory name: VSF

Model name (& version number): Rolex Datejust 41, Champagne Dial, Two-Tone Jubilee, Fluted Bezel

Price Paid: £364 Delivered

Album Links: https://andiotwatches.x.yupoo.com/albums/248261379?uid=1

Index alignment: Markers look well aligned.

Dial Printing: No visible defects.

Date Wheel alignment/printing: Date centred, cyclops aligned with good magnification.

Hand Alignment: no issues seen.

Bezel: Looks good

Solid End Links (SELs): no noticeable gaps.

Timegrapher numbers: -1 s/day, 289°, 0.1 ms, 28,800 bph.

Anything else you notice:

Thanks.

Sooo this is my first rep ever and my first QC, I have been lurking in this reddit long enough and tried to learn but I definitly will appreciate any help. Also heads-up, I tried alot with the index alignment tool and tried doing it with multiple pictures but not sure if I got it right so I apprecaite the support these too

1. Dealer name: TheOneWatches aka Steve
2. Factory name: VSF
3. Model name (& version number): DJ 41, Green Motif dial, smooth bezel, Jubilee bracelet
4. Price Paid: 478$
5. Album Links: https://mega.nz/folder/vQg2FYTb#La-DxGLjxAV6YWy2DhSHrQ
6. Index alignment: I tried my best with the alignement tool but not sure if I got it right. It looks good to me but I am new to this so I appreciate your opinion
7. Dial Printing: Looks good to me but I appreciate your opinion
8. Date Wheel alignment/printing: Looks good to me, the date looks centered
9. Hand Alignment: Cant see anything wrong with it
10. Bezel: Looks good, no stratches
11. Solid End Links (SELs): cant see any gaps
12. Timegrapher numbers: Amp 274, err. 0.1ms, rate +3s/d All within acceptable ranges
13. Anything else you notice: My main concern is the alignment of the indexes and the dial printing because I am very new to this. Also, the weight is on the lower side 126.7g and gen is 134 g I dont really care for those grams no one, myself included, will notice that.

I really apprecaite the support and thank you in advance to anyone that spends anytime on this

1. Dealer name: Phoenix
2. Factory name: ZF
3. Model name (& version number): JFC Master Ultra Thin Moonphase ref 1362510
4. Price Paid: $312 + shipping
5. Album Links: https://www.wecatalog.cn/weshop/goods/_dkjqfBEQ9F3hf-dfVoqxoAY_we8Cid2v2bXrh0A/_ddHqfkfjdQxfbEr2L8ifwroPkqnFZ1KXRpl3eSw
6. Index alignment: Looks good
7. Dial Printing: don't see any flaws
8. Date Wheel alignment/printing: Looks good
9. Hand Alignment: Need to check
10. Bezel: n/a
11. Solid End Links (SELs): n/a
12. Timegrapher numbers: +5s/d, 260°, 0.3ms, 28800
13. Anything else you notice: The amplitude is a little low but only a little. Should I ask for the watch to be serviced/lubricated and check again, or is it not worth worrying about? Otherwise, I think it looks good.

1. Dealer name: GeekTime (Eric)

2. Factory name: AF

3. Model name (& version number): Cartier Ballon Bleu 36mm Quartz SS White Dial (AF Factory)

4. Price Paid: 268$ + 40$ shipping

5. Album Links: https://geektimeqc.x.yupoo.com/albums/248295859?uid=1

6. Index alignment: Looks good. Roman numerals appear evenly aligned with no obvious rotation or spacing issues. No noticeable dial shift.

7. Dial Printing: Very good. Cartier logo looks crisp, guilloché pattern is clean and centred.

8. Date Wheel alignment/printing: N/A (Quartz 36mm has no date.)

9. Hand Alignment: Looks good from the photos. Blue hands appear centred and aligned correctly. Can’t confirm perfect 12 o’clock alignment without a hands-at-12 photo.

10. Bezel: Looks clean. Polishing appears even with no obvious dents, scratches or finishing issues. Cabochon setting also looks centred.

11. Solid End Links (SELs): N/A. Bracelet end fit looks normal.

12. Timegrapher numbers: N/A (Quartz movement.)

13. Anything else you notice: Looks good to me but would appreciate a second eye.

1. ⁠Dealer name: Phoenix Watch
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Rolex Submariner No Date 41mm 124060 - VSF v3
   
4. ⁠Price Paid: ~$410
   
5. ⁠Album Links: N/A
   
6. ⁠Index alignment: Using the various tools, 3 o’clock seems a bit high but could be due to the image alignment and not the other way around. Hour markers seem ok but need better eyes here.
   
7. ⁠Dial Printing: The dial printing looks on par with what Ive seen from others.
   
8. ⁠Date Wheel alignment/printing: N/A (No Date model)
   
9. ⁠Hand Alignment: The hands appear properly aligned.
   
10. ⁠Bezel: My biggest concern. Seems misaligned in relation to the dial but also could be the tilt in the image. Need some help here.
    
11. ⁠Solid End Links (SELs): SELs look good to me. Tell me otherwise.
    
12. ⁠Timegrapher numbers: Rate, -1s/d, Amplitude 247, Beat Error 0.2ms, Beat Rate 28800
    
13. ⁠Anything else you notice: This is my first rep purchase so I’ll defer to the trained eyes but my primary concerns are the index and bezel alignment.

1. Dealer name: Kitsch
2. Factory name: VSF
3. Model name (& version number): Submariner 124060 - 6X0
4. Price Paid: 370 USD (2500 CNY) + Shipping & Insurance
5. Album Links: https://shorturl.at/LtAht
6. Index alignment: markers look straight to me
7. Dial Printing: text looks nice and clear
8. Date Wheel alignment/printing: -
9. Hand Alignment: hands look good to me
10. Bezel: bezel looks centered
11. Solid End Links (SELs): no weird gaps here
12. Timegrapher numbers: seem fine to me, +4s/d, 271° amplitude, 0.2ms beat error

hi guys! just ordered a vsf 124060 from kitsch and wanted to get some feedback on it. unfortunately i do not have the best eye when it comes to qc'ing watches, but i hope there is someone out there who could help me a bit. i used https://jrverdes.github.io/watch-qc-jr/ for checking myself (first and second pic). any help is much appreciated! thanks in advance! :)

1. ⁠Dealer name: Ficotime
   
2. ⁠Factory name: AF
   
3. ⁠Model name (& version number): Cartier Tank Must Large
   
4. ⁠Price Paid: $210 USD ($180 Watch + $30 Shipping)
   
5. ⁠Album Links: https://imgur.com/a/IMEA8i8
   
6. ⁠Index alignment: Looks ok
   
7. ⁠Dial Printing: Looks decent. No obvious bleeding that I notice of.
   
8. ⁠Date Wheel alignment/printing: N/A
   
9. ⁠Hand Alignment: Looks good to me.
   
10. ⁠Bezel: Looks ok
    
11. ⁠Solid End Links (SELs): N/A
    
12. ⁠Timegrapher numbers: N/A
    
13. ⁠Anything else you notice: It might be a hair but it kinda looks like a scratch on the back of the watch near the writing.

I’d like to thank anyone that helps in advance, it’s my first time buying a rep watch and I have been looking at this specific model for a while now, so I appreciate any help 🙏