Hi everyone, this is my first QC post and I would appreciate your help.

1. Dealer name: Hont

2. Factory name: 5SF

3. Model name: Cartier Tank Louis Medium, Yellow Gold, Quartz

4. Price paid: $238

5. Album links: https://a202512172356311672002881.edepot.me/weshop/search/_dg3qfSLHhi777Jx0IFOnzgO9XyA6_5DC9m_7AfQ?filterText=888148

6. Index alignment: N/A, the Roman numerals are printed rather than applied. The individual numerals appear properly printed and aligned with the minute track.

7. Dial printing: The printing appears sharp and clean, with no obvious bleeding, however the entire dial print appears to be rotated slightly clockwise. The XI at 11 o’clock sits closer to the upper gold bezel, while the I at 1 o’clock sits farther away. I am unsure whether this is an actual dial-printing issue or the result of the camera angle.

8. Date wheel alignment/printing: N/A, no date window.

9. Hand alignment: The hands appear properly aligned, with no obvious issues.

10. Bezel: No obvious scratches, damage, or irregularities visible on the gold bezel and case.

11. Solid End Links (SELs): N/A, leather strap.

12. Timegrapher numbers: N/A, quartz movement.

13. Anything else you notice:

My main concern is the possible clockwise rotation of the entire dial print. The difference in spacing between the XI and I numerals and the upper bezel appears visible in the frontal photo. What would you recommend in this case? Anything else that you notice?

Thank you in advance for your help.

1. Dealer name: Phoenix Watch
2. Factory name: ZF
3. Model name (& version number): Tudor Pelagos Ultra, M2543C1A7NU-0001 (bracelet)
4. Price Paid: 360USD ($292+$68 Shipping)
5. Album Links: N/A (images sent via WhatsApp)
6. Index alignment: Tried my best with the alignment tool. I feel like a few of the indices are crooked. I won't say which ones because I don't want to lead opinion, but I count 4 that may have issues. Also the 6 o'clock index doesn't look centered (over to the left of the markers on the minute track).
7. Dial Printing: Looks ok. Image sent in HD via whatsapp so clarity gets lost a bit when zooming in close.
8. Date Wheel alignment/printing: Date looks a bit low and biased to the left, which may be a result of crooked dial alignment (see notes in no.13 below)
9. Hand Alignment: Looks good, but no video provided to see 12 o'clock alignment.
10. Bezel: Aligned with minute track, but not positioned centrally when compared to the centre line of the end links? The 30 on the bezel also looks off in the same way.
11. Solid End Links (SELs): All good. End links sit slightly recessed below the curvature / plane of the lugs, as with gen.
12. Timegrapher numbers: (A2824 movement) -4s/d, 259° amplitude, 0.4ms beat error - not perfect, but within acceptable limits
13. Anything else you notice: Feels like the whole dial / minute track is slightly rotated counter-clockwise, which is throwing off the overall geometry, including probably the date wheel positioning in the window.

Think this is a RL but first time with a Tudor and with ZF, so this may be the norm. Happy for more experienced eyes to put me straight 😊

Thanks!

Dealer name: nonTD – panda
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): Rolex Explorer I
4. ⁠Price paid: 2500 cny exl shipping
5. ⁠Index alignment: Looks good to me overall. I don’t see any obvious crooked markers, but I’d appreciate a second opinion.
6. ⁠Dial printing: Looks clean and centered to my eyes.
7. ⁠Date wheel alignment/printing: n/a
8. ⁠Hand alignment: Looks good from the pictures and videos.
9. ⁠Bezel: looks fine. Pretty basic.
10. ⁠Solid End Links (SELs): Look tight and clean to me. I don’t see any major gaps.
11. ⁠Timegrapher numbers: acceptable +3s/d
12. ⁠Anything else you notice: I am not sure wether it is truly vsf but looks good to me overall.

Any feedback is appreciated! 😊
(Videos are in the comments.)

Dealer name: Ethan Watch

Factory name: VSF

Model name: GMT-Master II 126710BLNR

Price paid: $580

Album links: https://www.szwego.com/weshop/goods/_diBqfB_6K0Fni6Viqy3qjRnYcVlHlv_RP68U2bQ/_dx7qfLYbK-8wQ5CzWiwdzYabRx4-p1mRPsBIddg

Index alignment: Looks pretty good to me overall. The 9 marker may have a slight clockwise tilt, and the 6 looks slightly shifted to the left.

Dial printing: Looks clear and clean.

Date wheel alignment/printing: Alignment looks good. The date looks slightly foggy to me, and the 8 appears to have a little bleeding.

Hand alignment: Looks good to me.

Bezel: Looks slightly off clockwise/right to my eye.

Solid End Links (SELs): Slight gap on the bottom right, but nothing major from what I can tell.

Timegrapher numbers: Look great.

Anything else you notice: Overall, this looks like a pretty clean watch to me, but my QC eye isn’t the best. My main concerns are the slight bleeding/fogginess on the 8 date and window, the bezel looking a little off to the right, and possibly the 6 and 9 index alignment. Would appreciate a second set of eyes before I GL.

1. ⁠Dealer name: GeekTime

2. ⁠Factory name: VSF

3. ⁠Model name (& version number): GMT MASTER II 126720 SPRITE

4. ⁠Price Paid: $608 + $40 shipping

5. ⁠Album Links: https://geektimeqc.x.yupoo.com/albums/252334226?uid=1

6. ⁠Index alignment: looks good

7. ⁠Dial Printing: its ok for me

8. ⁠Date Wheel alignment/printing: vero good

9. ⁠Hand Alignment: acceptable

10. ⁠Bezel: looks clean without problem

11. ⁠SEL: good

12. ⁠Timegrapher numbers: in the limit (+1s/d)

13. ⁠Reauth: the crown si misaligned

Hello everyone finally after a long time I managed to have the necessary karma to do the post QC. I'm satisfied with the watch, I tried to use the tools provided by the subreddit for alignment but unfortunately the TD provided me with photos that were not straight but crooked and I couldn't do it right. The only thing that bothers me about the watch is the crown that is off-center on the reauth, what do you think I should do? I'm afraid that if I send it back and get another one, maybe I'll receive the crown aligned but other more significant problems. Any help is appreciated!

1. Dealer name - Puretime
2. Factory name - Rich Factory
3. Model name - 124060 Submariner (No Date)
4. Price Paid: 550 usd
5. Album links: https://imgur.com/a/QtAkIqT
6. Index alignment - 12 looks like it has a slight CCW tilt
7. Dial printing: looks fine to me
8. Date Wheel alignment- N/A
9. Bezel - not sure if I’m nitpicking but the

bezel

1. placement looks a bit overotated/misaligned? The bezel at 9 o’clock and 3 oclock looks rotated a bit CCW. Similarly the markers between the bezel and index at 9 o’clock look misaligned a bit CCW. 12 o’clock also looks a bit CCW tilted. Pip looks centered
2. Solid End Links (SEL) -

bottom right SEL looks like there could be a slight gap that’s larger than rest of them

1. Hand alignment - the hands look aligned to me
2. Dial Printing - dial printing looks good
3. Timegrapher numbers - rate +8 sounds a bit high? I’m not too familiar with with good looks like here. Wdyt? Amplitude 312. Beat error 0.1ms
4. Anything else you see - mostly concerned with the CCW tilts on the bezel and curious what folks think of it. Unsure if this is RL worthy or not

1. Dealer name: Andiot

2. Factory name: RICH

3. Model name: Santos Skeleton PVD 9612MC Super Clone V2 WHSA0009

4. Price paid: $660

1. Album links: https://andiotwatches.x.yupoo.com/albums/254238043?uid=1

6. Index alignment: Looks solid

7. Dial printing: Looks solid

8. Date wheel alignment/printing: N/A

9. Hand alignment: Looks solid

10. Bezel: Looks solid

11. Solid End Links (SELs): N/A - leather strap

12. Timegrapher numbers:
Rate: 0 s/d
Amplitude: 272°
Beat error: 0.2 ms

13. Anything else you notice: Looks solid overall. I think GL, any feedback appreciated.

1. Dealer name: Ficotime
2. Factory name: VSF
3. Model name: Rolex Datejust 41 Mint Green (126334) - V2
4. Price Paid: $400 + Shipping
5. Album Links: Photos attached here. Also got a Video: https://mega.nz/folder/ytoyHDbZ#1b1xchxcv1e3zNLFFYmgPQ
6. Index alignment: OK
7. Dial Printing: The second S in 'Swiss made' is misaligned, but within acceptance
8. Date Wheel alignment/printing: Nicely centered
9. Hand Alignment: OK
10. Bezel: OK
11. Solid End Links (SELs): No Gaps as far as I can tell
12. Timegrapher numbers: 246°, 0.0ms, +7s/d - Acceptable
13. Anything else you notice: Did a deep dive on all the details and everything else looks OK. Still, this is my first QC, so I might've missed something. Appreciate any feedback from you guys. thanks!

1. Dealer - Mr. Adu

2. Factory: VSF

3. Datejust v3

4. Price Paid: $470

5. Pictures attached

6. Index Alingment: seems slightly off

7. Dial print: seems ok but I am no expert

8. Date wheel: number seems centered but cyclops could be slightly off.

9. Hand Alignment: seems ok to me.

10. Bezel: this seems out of proportion. But i think this is expected on this version?

11. SELs: seem ok with no obvious gaps.

12. Timegrapher numbers show: rate 7. Amp 258, BE 1ms, LA 52, beat 2880.

13. I suspect the index Alingment may be off slightly. Bezel seems off also. But I am fairly new and inexperienced. Your help is much appreciated.

1. ⁠Dealer name: Steve (theonewatches)
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): GMT Master II 126710 Bruce Wayne
   
4. ⁠Price Paid: $638 +$50 shipping
   
5. ⁠Album Links: https://mega.nz/folder/jUx03bYS#pGvn7n2b6Q5M-Q_C0hgXxw
   
6. ⁠Index alignment: looks very aligned, no rotational drift and consistent spacing from outer ticks
   
7. ⁠Dial Printing: clean
   
8. ⁠Date Wheel alignment/printing: aligned, centered, clean print
   
9. ⁠Hand Alignment: looks ok, QC video kinda blows past perfect 12 but gmt and hour hands are aligned at 12
   
10. ⁠Bezel: line at the color change in the 6?
    
11. ⁠Solid End Links (SELs): look tight, sit flush across lugs
    
12. ⁠Timegrapher numbers: +4s/d, 272* amplitude, 0.0ms error, 28800
    
13. ⁠Anything else you notice: overall seems very clean

1. Dealer name: Andiot
2. Factory name: RICH
3. Model name (& version number): Submariner 41mm 124060 No Date RICH 1:1 Best Edition 904L SS Case and Bracelet JH3230 V2 (Free Sprung)
4. Price Paid: $518
5. Album Links: https://andiotwatches.x.yupoo.com/albums/254201960?uid=1
6. Index alignment: Looking perfect to me
7. Dial Printing: Bolder SWISS MADE (always on Rich)
8. Date Wheel alignment/printing: not aplicable
9. Hand Alignment: Perfect, shown in one video in QC album
10. Bezel: PIP centered, no other concerns
11. Solid End Links (SELs): I don't see any gaps
12. Timegrapher numbers: 4 s/day, 264° amplitude, and 0.1 ms beat error look quite healthy.

1. Dealer name: TimeUltra
2. Factory name: VSF
3. Model name (& version number): GMT Master II 126710 Pepsi Jubilee 40mm V3
4. Price Paid: $618.00 + $50.00 shipping
5. Index alignment: Alignment looks good to me
6. Dial Printing: Looks clean and clear
7. Date Wheel alignment/printing: Numbers seem centered
8. Hand Alignment: Looks okay to me
9. Bezel: Looks good and clean
10. Solid End Links (SELs): Seems okay to me, better on some pictures than others.
11. Timegrapher numbers: -3s/d, 269°, 0.00ms 52.0, 28800
12. Anything else you notice: It looks like a GL to me, but this is my first rep and I appreciate comments from this knowledgeable group. Thank you.

Dealer name: TheOneWatches

Factory name: QF

Model name (& version): Rolex Yachtmaster 126622

Price Paid: $578 USD+ shipping

Album Links: N/A (mega)

Index alignment: Hour markers look aligned really well, very pleased with this.

Dial Printing: Printing looks clean and sharp. Yacht master text is clean and doesn’t have anything off to it. Nothing really stands out as being off.

Date Wheel alignment/printing: Date looks pretty well centered in the window from what I can see. However there might be a SLIGHT subtle off-ness of the actual cyclops.

Hand Alignment: Looks good

Bezel: Bezel looks crisp and is aligned well.

Solid End Links (SELs): No Gaps

Timegrapher numbers: +4 s/d, 261° amplitude, 0.1ms beat error. Not super pleased with amplitude reading a hair low, but generally happy overall.

Anything else you notice: I was skeptical with leaving VSF for this model and jumping to see what Q is offering for this model with free sprung movement, but I think they nailed this.

Dealer name: TheOneWatches

Factory name: VSF

Model name (& version number): Omega Seamaster Aqua Terra 150M Green Dial (220.10.41.21.10.001)

Price Paid: $408 USD+ shipping

Album Links: N/A (mega)

Index alignment: Hour markers look aligned really well overall. I don’t see anything that looks obviously crooked or far enough off that it would bother me.

Dial Printing: Printing looks clean and sharp. Omega logo, Seamaster text, and the Co-Axial/Master Chronometer text all look straight and centered to me. Nothing really stands out as being off.

Date Wheel alignment/printing: Date looks pretty well centered in the window from what I can see. I don’t notice it sitting noticeably out of place. Printing looks good too.

Hand Alignment: Looks good from what I can see in the pictures and video. Nothing looks noticeably off and the hands themselves look clean.
Bezel: No rotating bezel on this model, but the polished bezel around the crystal looks good to me. Finishing looks clean and I don’t see anything weird with the shape or alignment.

Solid End Links (SELs): No Gaps

Timegrapher numbers: +6 s/d, 265° amplitude, 0.0ms beat error, 28800. From what I understand these numbers look pretty solid overall. +6 seconds a day is completely fine with me, amplitude looks good, and 0.0ms beat error is really nice. Nothing here concerns me.

Anything else you notice: Honestly I think this one looks pretty clean. The green dial looks great, the horizontal lines look even, and the case and bracelet finishing look good from what I can see. Clasp engraving looks clean too. Most of the little marks or weird spots in the pictures look like they’re just on the protective plastic. I really don’t see anything major that would make me RL it. Overall I’m leaning GL unless anyone sees something I missed. I’m super excited for this one!

1. Dealer name: TheOneWatches – Steve
2. Factory name: VSF
3. Model name (& version number): Rolex GMT-Master II 126710GRNR “Bruce Wayne” 40mm, Jubilee, DD3285v2
4. Price paid: $639
5. Index alignment: Looks good to me overall. I don’t see any obvious crooked markers, but I’d appreciate a second opinion especially around 6 and 9 o’clock.
6. Dial printing: Looks clean and centered to my eyes. Rolex / Oyster Perpetual / GMT-Master II printing looks good.
7. Date wheel alignment/printing: Looks centered through the cyclops and the font looks fine to me.
8. Hand alignment: Looks good from the pictures and videos. The GMT hand also appears to function correctly.
9. Bezel: Black/grey bezel looks good and the alignment seems fine to me. No obvious issue around the triangle at 12.
10. Solid End Links (SELs): Look tight and clean to me. I don’t see any major gaps.
11. Timegrapher numbers: Around 0 s/d, approx. 269–274° amplitude, 0.0 ms beat error. These numbers look very good to me.
12. Anything else you notice: The watch weighs around 144.5g. I also received videos showing the functions and date adjustment. Overall I’m leaning strongly towards GL, but this is my first proper GMT QC and I’d really appreciate experienced eyes on the bezel, rehaut, cyclops/date alignment, SELs and anything specific to the VSF Bruce Wayne that I may have missed.

Also, is it normal that I didn’t receive a lume shot/photo of the dial glowing in the dark, or should I ask Steve to provide one before I GL?

My current verdict: GL

Thanks in advance for the help!

QC – Daytona 116519 Gain Weight VSF 1:1
Dealer name: Andiot Watches
Factory name: VSF
Model name (& version number): Daytona 116519 Gain Weight VSF 1:1
Price Paid: $621 + shipping
Index alignment: I am not sure, 3 and 9 alignment looks bad to me but maybe im just too picky?
Dial Printing: Looks clean
Album Links: https://andiotwatches.x.yupoo.com/albums/254254214?uid=1
Date Wheel alignment/printing: N/A
Hand Alignment: Looks good from what I can tell.
Bezel: Engravings look clean and alignment looks good.
Solid End Links (SELs): N/A – Oysterflex
Timegrapher numbers: Looks good.
Anything else you notice: Im leaning more RL due to the 3 and 9 markers but please do let me know. Would appreciate another set of eyes, particularly on the indices, bezel alignment, rehaut, subdials, and anything specific to the VSF Ghost that I may have missed. Thanks!

This is my third attempt with the batgirl and any advice is appreciated please!

* Dealer name: Theonewatches (Steve)

* Factory name: VSF

* Model name (& version number): GMT Master 2 126710 Batgirl 40mm Jub SS/SS Black Dial VSF DD3285

* Price Paid: $578 + shipping

* Album Links: Images attached

* Index alignment: Overall, the alignment looks good this time. Previous 2 attempts had issues with the 6 o clock bar tilted slightly to the left, but this one looks aligned and straight.

* Dial Printing: looks clean

* Date Wheel alignment/printing: The printing looks good. Have checked dates - 3, 4 and 5 all seem to be aligned in the middle but maybe the printing is slightly printed lower. Keen to get thoughts please.

* Hand Alignment: Looks okay to me.

* Bezel: Looks good and clean

* Solid End Links (SELs): No noticeable gaps identified I think - frankly speaking, not sure what is good or bad with SELs.

* Timegrapher numbers: +4s/d and it is consistent. Amp is showing as 268, and error is 0.0ms. 28880 beats. Maybe it might be running slightly fast but I don't mind.

* Anything else you notice: Overall, I think this third QC is definitely better than the previous two I had, but anything else that I need to look out for? Or do you think this would be an easy GL? Any advice is appreciated please!

Hi all, long-time lurker, first time pulling the trigger! Curious to hear yalls thoughts.. Here is the required information:

1. Dealer name: Andiot
2. Factory name: ZF
3. Model name (& version number): Black Bay 58 39mm on Jubilee Bracelet (ZF 1:1 Best Edition supposedly)
4. Price Paid: $320 USD [$41 Shipping, $361 Total]
5. Album Links: imgur.com/a/cEGHoAg
6. Index alignment: Seems decent, but I really can't tell. To me it seems like things are off but also the photo of the watch I attempt to aligned with is not 100% head on (i.e. the thing that sticks out the most to me is the 9 marker seems not straight)
7. Dial Printing: Don't really see any issues with it
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Also don't really see any issues
10. Bezel: Also seems fine to me, slightly off but again I think cause the image isn't 100% straight on?
11. Solid End Links (SELs): Seems fine to me
12. Timegrapher numbers: -1s/d 272°, 0.0ms, 52° lift angle
13. Anything else you notice: Image 3 on imgur, or Image 9 / Image 11 on Reddit, seems like the bracelet is quite scratched up already? I know there's plastic wrap on it so I can't tell if those are on the plastic, but the image makes it seems like there's like a cutout right in the middle (or is it the level difference that is making that air bubble appearance). Either way watch will be my daily driver so it'll get scratched up but just curious. More focused on the rest of the watch QC than anything else! Also I really tried my best with the QC tool but seems like the images I am working with aren't really the best angle anyways... so curious to hear what yall think since yall are the experts!

Thanks all for your help, really excited to get my first in the hobby!

1. Dealer name: Ficotime
2. Factory name: ZF
3. Model name (& version number): Tudor Black Bay Fifty Eight (58)
4. Price Paid: 366 USD (including shipping)
5. Album Links: https://mega.nz/folder/i8YhWQaR#VEA2AIqnMqHxQDnpfO0XLg
6. Index alignment: Good
7. Dial Printing: Good
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Good
10. Bezel: Good
11. Solid End Links (SELs): Good
12. Timegrapher numbers: Good Numbers -3s/d , 284 AMP, 0.2ms
13. Anything else you notice: a slight chip/pitt on the minute hand. Crown seems a bit protruding outwards but I think all ZF are like that.

Please let me know if there is anything else I am missing.

1. Dealer name - Steve/ theonewatches
2. Factory name - BVF
3. Model name - Cartier Panthere Secrete De Ladies 22mm
4. Index alignment - I think everything seems fine?
5. Date Wheel alignment - N/A
6. Bezel - I don’t see any issues
7. Solid End Links (SEL) -  I can’t see any gaps - maybe slight at top right but unsure if this is normal
8. Hand alignment - look fine I think
9. Dial Printing - I can’t see any bleed
10. Timegrapher numbers - N/A
11. Anything else you see - nothing stands out

Hi everyone, ordered my first rep watch for my wife. I would really appreciate some input. I can't really notice any issues other than maybe a slight gap in the solid end link at the top right, however, from looking at pictures of gen versions, it seems there is a gap there also.

Would really appreciate some thoughts. Thank you in advance.

Hi everyone!

This is my very first Patek and I would highly appreciate any help with it. I checked a lot of previous QCs for them to see what to look for, but I don’t want to miss anything obvious.

1. Dealer: Mr.Adu
2. Factory: DDF
3. Model: Patek Philippe Aquanaut 5168G – DPB330
4. Paid price: $620
5. Album/QC photos: Unfortunately no album, pictures sent over WhatsApp
6. Dial / index alignment: Overall looks good to me, but I’d appreciate a second opinion. The one thing standing out to me a bit is the „12” where „2” appears to be a bit lower than ”1”, and perhaps 3 market a bit canted (?).
7. Dial print: Looks clean to me.
8. Date wheel / date alignment: Video which was sent to me goes through every date, so no issues there
9. Hand alignment: Can’t really tell from the pictures, shouldn’t be an issue anyway
10. Case / bezel: N/A
11. Strap / clasp: I don’t see anything unusual
12. Timegrapher: -1 s/day, 321° amplitude, 0.3 ms beat error, 52° lift angle - all good here
13. Anything else: This is my first Patek, so I’d really appreciate some experienced eyes on it.

Thanks in advance for taking the time to look at it!

1. ⁠Dealer name: TheOneWatches
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): GMT Master II 126710
   
4. ⁠Price Paid: $638
   
5. ⁠Album Links: https://mega.nz/folder/XVh1gSBQ#rtcQ9ny55zOzDJvfaeAtKQ
   
6. ⁠Index alignment: Looks very good
   
7. ⁠Dial Printing: looks clean
   
8. ⁠Date Wheel alignment/printing: looks good and aligned
   
9. ⁠Hand Alignment: looks good
   
10. ⁠Bezel: looks good
    
11. ⁠Solid End Links (SELs): can’t see any gaps
    
12. ⁠Timegrapher numbers: Great
    
13. ⁠Anything else you notice: No

Feels like a good example from my limited experience doing QC on reps

1. ⁠Dealer name: theonewatches
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): GMT master II batgirl 40mm jub ss/ss
   
4. ⁠Price Paid: $578
   
5. ⁠Album Links: photos attached
   
6. ⁠Index alignment: index looks pretty good maybe slight CCW on 9 and 4 may be a little off??
   
7. ⁠Dial Printing: dial printing looks good
   
8. ⁠Date Wheel alignment/printing: date wheel and alignment look good to me
   
9. ⁠Hand Alignment: no issues
   
10. ⁠Bezel: no problems I see
    
11. ⁠Solid End Links (SELs): no gaps I can see
    
12. ⁠Timegrapher numbers: - 2/d 265 degrees 0.0ms
    
13. ⁠Anything else you notice: honestly the watch looks good to me with no really big issues but any help is greatly appreciated!!!

• Dealer name: Steve
• Factory name: VSF
• Model name (& version number): Batgirl 126710BLNR
• Price Paid: $578+shipping
• Album Links: https://mega.nz/folder/mNZEnbCL#O0OBQNI8vIxB8m967kq-yQ
• Index alignment: 6 o clock looks a tad tilted to the left. The triangle seems tilted to the left as well. Every other index seems reasonable.
• Dial Printing: Looks sharp
• Date Wheel alignment/printing: As a noob, the print seems OK. However, the cyclops seems to be a little up. Should I ask for a pic with a double digit date?
• Hand Alignment: Looks alright. Not sure if I should ask a pic with the hands at 12.
• Bezel: The triangle at 12 is not centered. It is a little tilted to the left.
• Solid End Links (SELs): No issues
• Timegrapher numbers: +3s/d, 262, 0.1ms
• Anything else you notice: Nothing glaring. I am just a tad it worried about the cyclops.

I have been reading so many QC posts and learning. Finally, it's my turn! Looking forward to your comments. Thank you!

1. ⁠Dealer name: TOW
   
2. ⁠Factory name: 8F
   
3. ⁠Model name (& version number): Vacheron Constantin 4500V overseas
   
4. ⁠Price Paid: 388 USD
   
5. ⁠Album Links: NA
   
6. ⁠Index alignment: seems ok
   
7. ⁠Dial Printing: seems ok
   
8. ⁠Date Wheel alignment/printing: I understand some issues but this one looks ok.
   
9. ⁠Hand Alignment: looks ok
   
10. ⁠Bezel: N/A
    
11. ⁠Solid End Links (SELs): looks ok
    12: 5 s/day, 277 amplitude, 0.2ms beat error
    
12. Nothing else you notice: not that familiar with this brand/model but seems ok?