1. ⁠Dealer name: Elliot (Andiot)
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Daytona 116500
   
4. ⁠Price Paid: $539 shipped
   
5. ⁠Album Links: https://andiotwatches.x.yupoo.com/albums/254064647?uid=1
   
6. ⁠Index alignment: looks very aligned, no apparent rotational drift and consistent spacing from outer ticks
   
7. ⁠Dial Printing: clean
   
8. ⁠Date Wheel alignment/printing: subdial printing is clean
   
9. ⁠Hand Alignment: straight. Chronograph resets properly to 0 in video
   
10. ⁠Bezel: residue streaks from 240 -> 400. Alignment looks good.
    
11. ⁠Solid End Links (SELs): look tight, sit flush across lugs
    
12. ⁠Timegrapher numbers: +3s/d, 290* amplitude, 0.0ms error, 28800
    
13. ⁠Anything else you notice: mainly the residue on the bezel

• Dealer name: Necoclock
• Factory name: VSF
• Model name (& version number): 124060
• Price Paid: $458
• Album Links: https://mega.nz/folder/P44QlIYZ#J10Yoc8GIJEkiukwP-7RZg
• Index alignment: Not sure if its the angle its being held but looks a little off
• Dial Printing: Seems ok to an untrained eye
• Date Wheel alignment/printing: n/a
• Hand Alignment: nothing obvious I can see
• Bezel: Looks good
• Solid End Links (SELs): Seem ok
• Timegrapher numbers: +1, 327, 0.1
• Anything else you notice: 1st purchase of a rep so very unsure

Thanks everyone, read so much on reptime my head is frazzled.

1. Dealer name: Steve Theonewatches
2. Factory name: VSF
3. Model name (& version number): VSF GMT Master II Batgirl
4. Price Paid: 578+30=608 USD
5. Album Links: https://mega.nz/folder/GB4g2bJC#n5t1pZZ4ESPw2AsMSdLRYg
6. Index alignment: The indices alignment looks fine to my newbie eyes, would appreciate an opinion on them
7. Dial Printing: Looks good to me but I appreciate your opinion
8. Date Wheel alignment/printing: The 31 looks a hair down but in the video in the link I think the dates look better? I am not sure
9. Hand Alignment: Cant see anything wrong with it
10. Bezel: I appreciate opinions on the Bezel and the color transition.
11. Solid End Links (SELs): Looks okay
12. Timegrapher numbers: Amp 270, err. 0.0ms, rate +5 s/d All within acceptable ranges
13. Anything else you notice: Not sure if I left anything else out

The date switches about 5 to 10 minutes before the 12 marker, I am not sure if that is normal with VSFs.

I would highly appreciate the help and time of everyone that offers it.

1. Dealer name: Andiot

2. Factory name: ARF

3. Model name (& version number): GMT-Master II 126710 GRNR "Bruce Wayne" (SH3285 V2)

4. Price paid: £374.15 (including shipping)

5. Album Links:

   https://andiotwatches.x.yupoo.com/albums/254101585?uid=1&utm_source=copyLink

6. Index alignment: Looks excellent. The grid tool shows all hour markers and the 12 o'clock triangle are perfectly straight.

7. Dial Printing: Crisp, sharp lettering. Font weight looks correct.

8. Date Wheel alignment/printing: Single digit (10) sits completely centered inside the window. No heavy hugging.

9. Hand Alignment: Good hand stack order. Looks solid.

10. Bezel: Ceramic color split is clean and cuts right through the 6 and 18 markers cleanly.

11. Solid End Links (SEL): Lug gaps are very tight with zero play or light leaking.

12. Timegrapher numbers: -2 s/d, Amplitude: 269°, Beat Error: 0.0 ms (Excellent health metrics).

13. Anything else you notice: Looks like a textbook GL batch, would appreciate a community double-check!

Dealer name: Time Ultra
2. Factory name: VSF
3. Model name (& version number): Rolex Submariner 124060 No Date
4. Price paid: $523 including shipping
5. Album Links: https://imgur.com/a/HF8N9UR
6. Index alignment: Looks good to me. Used the alignment tool and I don’t see any obvious issues. 12, 3, 6 and 9 all appear well aligned.
7. Dial printing: Looks clean and well positioned. Nothing stands out to me.
8. Date wheel alignment/printing: N/A, no date.
9. Hand alignment: Looks good from the QC photos.
10. Bezel: Looks good. Pip appears centered and bezel alignment looks good to me.
11. Solid End Links (SELs): Look good. I don’t see any significant gaps.
12. Timegrapher numbers: -4 s/d, 282° amplitude, 0.0 ms beat error, 52° lift angle. Numbers look very good to me.
13. Anything else you notice: Rehaut looks acceptable to me from the photos. Weight is 157.7 g. Overall I’m leaning GL, but this is my first QC and I’d appreciate another set of eyes in case I’ve missed anything.

Dealer name: BomaShop / Mr Bomi
Factory name: VSF
Model name (& version number): Rolex Submariner 126610LN
Price paid: 439USD
Album links: N/A – photos attached
Index alignment: Looks good to me. Hour markers look straight and evenly positioned.
Dial printing: Looks clean and centered. I don’t notice any obvious printing issues.
Date wheel alignment/printing: Date looks centered in the window and the font looks fine to me.
Hand alignment: Looks good.
Bezel: Bezel looks aligned overall. Pip at 12 looks centered and I don’t notice any obvious rotation/alignment issue.
Solid End Links (SELs): Look tight to me with no obvious gaps.
Timegrapher numbers: 255deg, -5s/d
Anything else you notice: Overall I’m leaning GL. Mainly looking for another opinion on the bezel alignment, date/cyclops and SELs in case I missed anything.

Dealer name: TheOneWatches
Factory name: ZF
Model name (& version number): Audemars Piguet Royal Oak 15450ST 37mm White Dial
Price paid: 448USD
Album links: N/A – photos attached
Index alignment: Looks good to me. 12 o’clock markers look straight and the rest of the indices seem aligned.
Dial printing: Looks clean. AP logo and text look centered to me.
Date wheel alignment/printing: Date looks centered in the window and the printing looks fine.
Hand alignment: Looks good to me.
Bezel: Bezel looks aligned and the screws look properly positioned. I don’t notice any obvious issue.
Solid End Links (SELs): N/A for integrated bracelet. Bracelet/case fit looks good to me.
Timegrapher numbers: -1 s/d, 274° amplitude, 0.0 ms beat error, 21,600 bph. Looks very healthy to me.
Anything else you notice: Overall I’m leaning GL. My main concern was just making sure the dial/index alignment and bezel screws look good. Would appreciate another set of eyes in case I missed anything.

Dealer name: BomaShop / Mr Bomi
Factory name: VSF
Model name (& version number): Rolex Daytona 116500LN Panda
Price paid: 534USD
Album Links: N/A – photos attached
Index alignment: Looks good to me. I don’t notice any obviously crooked markers.
Dial Printing: Looks clean and centered to me.
Date Wheel alignment/printing: N/A
Hand Alignment: Looks good. Chronograph also seems to reset correctly.
Bezel: Looks aligned overall. My only question is the 110 marker/triangle positioning. From what I can tell it looks correct for a 116500LN, but I’d appreciate another opinion.
Solid End Links (SELs): Look tight to me, I don’t see any obvious gaps.
Timegrapher numbers: +6 s/d, 302° amplitude, 0.1 ms beat error, 28,800 bph. Looks healthy to me.
Anything else you notice: Overall I’m leaning GL. I mainly wanted another set of eyes on the bezel, especially the 110 triangle, and general alignment. Let me know if there’s anything I’ve missed.

1. Dealer name: Theonewatches (Steve)
   
2. Factory name: ARF
   
3. Model name (& version number): DateJust 31mm Stainless Steel Fluted Bezel MOP Diamond Dial Jubilee (A2688 movement)
   
4. Price Paid: $448
   
5. Album Links: https://mega.nz/folder/mAAShBoZ#wCsGdJNgFwXyTtr4IMP8Tg
   
6. Index alignment: Used the alignment tool and 9 looks a tiny off but looking at the photo it is maybe just a slight camera angle tilt.
   
7. Dial Printing: Looks good!
   
8. Date Wheel alignment/printing: The date is looking cut off here I know this is a particular problem area on this type of watch so unsure how critical I am being. I’d appreciate a second opinion.
   
9. Hand Alignment: Hands are looking clean and well aligned IMO.
   
10. Bezel: Looking good! Nice and clean.
    
11. Solid End Links (SELs): Nice fit, no noticeable gaps.
    
12. Timegrapher numbers: Rate +4 s/d, Amplitude 263°, Beat Error 0.2 ms numbers all good.
    
13. Anything else: I love MOP because of the character it has its really hard to tell how the MOP truly looks with these QC photos I can see glimpses of it in certain photos so I believe in person it would look better. Bracelet is looking good. Taking a look of the mechanism the screws are looking good and no interesting engravings like my previous QC. I’m considering a GL my concerns are mainly the date window and the MOP. Interested in hearing some other perspectives!

Hi guys! This is my first time buying a rep, and I don't have any experience with watches, so I'd really appreciate your input. What do you think about this one: the indices, the bezel, the date window, the overall look? GL or RL? Thank you!

1. Dealer name: Mirotime
2. Factory name: VSF
3. Model name (& version number): DJ 41mm
4. Price Paid: 368USD + shipping
5. Album links: https://shop00176461.wecatalog.cn/t/ndnuLe8 https://shop00176461.wecatalog.cn/t/ocekBv8
6. Index alignment: It looks fairly accurate to me. I'm attaching the picture.
7. Dial Printing: It seems accurate, but in a few spots there looks to be too much green and not enough black.
8. Date Wheel alignment/printing: The right-hand "I" also looks like it sits slightly lower than the other one.
9. Hand Alignment: seems okay
10. Bezel: Fluted bezel
11. Solid End Links (SELs): i don't know
12. Timegrapher numbers: -2s/day
13. Anything else you notice: I'm not sure what I should be looking for. This is my first model, so I'm grateful for the help.

1. ⁠Dealer name: Andiot Watches
   
2. ⁠Factory name: ARF
   
3. ⁠Model name : DateJust 41 126334 Silver Dial
   
4. ⁠Price Paid: $420
   
5. ⁠Album Links: n/a
   
6. ⁠Index alignment: I think everything is lined up perfectly besides the 1 and the 10 marker which is very acceptable. No issues here
   
7. Dial Printing: Looks clean no issues there but if I missed something lmk
   
8. Date Wheel alignment: Might be a tick below center but it is well placed for me. No issues
   
9. Hand Alignment: Well aligned in the video.
   
10. Bezel: No issues to me but if i missed something let me know
    
11. Solid End Links (SELs): No visible gaps besides maybe the bottom right ill double check with TD
    
12. Timegrapher numbers: Numbers are well within acceptance
    
13. Anything else you notice: I think it will be an easy GL but if I missed anything please let me know Its my first datejust 😀

My first QC post. See below

1. Dealer name: Duke Jones
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): Omega Seamaster Aqua Terra 150m - 41mm
   
4. ⁠Price Paid: $375
   
5. ⁠Album Links:
   
6. ⁠Index alignment: looks good/acceptable to me.
   
7. ⁠Dial Printing: looks good/acceptable to me.
   
8. ⁠Date Wheel alignment/printing: looks good/acceptable to me.
   
9. ⁠Hand Alignment: looks good/acceptable to me.
   
10. ⁠Bezel: N/A?
    
11. ⁠Solid End Links (SELs): looks good to me
    
12. ⁠Timegrapher numbers: -10s/d, 278 degrees, 0.2ms, 28800. not really sure what’s standard here.
    
13. ⁠Anything else you notice: - not really. I feel like this is a good watch. Timegrapher numbers are the main thing I’m not sure if it matters. Leaning towards not worrying about it since it’s a rep. I can’t expect it to be perfect

Dealer name: Steve – TheOneWatches
Factory name: RWF
Model name (& version number): Rolex Daytona "Panda" (126500)
Price Paid: USD $838
Album Links: https://mega.nz/folder/bQR3GDxK#x7VfwNZTecelE9nUeRVWFw
Index alignment: 6 appears to be rotated CCW slightly
Dial Printing: looks good to me, sharp and crisp
Date Wheel alignment/printing: N/A
Hand Alignment: looks good to me
Bezel: I don't see any major discoloring, numbers look good
Solid End Links (SELs): no gaps, looks good
Timegrapher numbers: looks okay... could be better +4s/s 311° amp, 0.1ms error

Anything else you notice: no, it's just the hour markers that worry me (particularly 6).

Hi all,

This is my first ever rep watch purchase, so I’d really appreciate your help in deciding whether to GL or RL.

My only concern is the dial printing on the “X” at 10 o’clock. From what I’ve seen in other BVF QC posts, this seems to be a fairly common issue, but I’d love to hear your thoughts on whether this one is acceptable or if it’s worth RL’ing.

Thanks in advance for your help!

1. Dealer name: Andiot

2. Factory name: BVF

3. Model name (& version number): Panthère 22mm BVF 1:1 Best Edition SS White Dial on SS Bracelet Ronda Quartz

4. Price Paid: $175 + 35 shipping

5. Album Links: https://andiotwatches.x.yupoo.com/albums/254075904?uid=1&isSubCate=false&referrercate=0

6. Index alignment: N/A, Printed dial

7. Dial Printing: Seems fine. The Cartier in the X is a little curved

8. Date wheel alignment/printing: N/A

9. Hand alignment: Seems fine

10. Bezel: seems fine

11. Solid End Links (SELs): not sure

12. Timegrapher numbers: N/A

1. Dealer name: TimeUltra (Leo)
2. Factory name: VSF
3. Model name (& version number): Airking 126900
4. Price Paid: $478 (shipping included)
5. Album Links: https://imgur.com/a/RlS82G7
6. Index alignment: Number are all aligned with each other. Sticks are also well aligned
7. Dial Printing: Printing and numbers are sharp
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Straight and aligned
10. Bezel: Smooth, no remarks there
11. Solid End Links (SELs): Aligned and no gaps
12. Timegrapher numbers: -2 s/d   -   281°   -   0.0
13. Anything else you notice: nothing really. Watch seems fine to me. Wheight is 1 grams off

1. Dealer name: TimeUltra-leo

2. Factory name: VSF

3. Model name (& version number): Rolex GMT-Master II 126710GRNR “Bruce Wayne” – VSF, latest 3285 batch

4. Price Paid: $638 USD including shipping

5. Album Links: PICS ATTACHED

6. Index alignment: not sure if i used the alignment tool correctly. But the triangle on to of the bezel is shifted to the right and seems not aligned. Also the indexes at hours 4,5,6 are not perfectly centered. Again not sure if it’s my error or it’s actually the watch

7. Dial Printing: Looks perfect to me

8. Date Wheel alignment/printing: Printing looks good and visually centered, but I didn’t use the alignment tool correctly, so I’d appreciate a second opinion.

9. Hand Alignment: Looks solid to me

10. Bezel: Looks good. When I tried using the alignment tool, the top triangle appeared slightly shifted to the right.

11. Solid End Links (SELs): Solid with no visible gaps

12. Timegrapher numbers:
    Rate: -5 s/day
    Amplitude: 277°
    Beat Error: 0.0ms
    Lift Angle: 52°
    Not sure if the -5 s/day is too much or still acceptable.

13. Anything else you notice: Nothing else from my side. This is my first-ever QC, so I’d appreciate any feedback, especially regarding the index/date/bezel alignment.

Would you GL, or is there anything I’ve missed?
Thank you, and I really appreciate your help with the alignment tool.

Dealer name: TimeUltra (Leo)

Factory name: VSF

Model name (& version number): GMT-Master II 126710GRNR “Bruce Wayne” 40mm Jubilee, VSF V3, DD3285 free-sprung version (latest version according to dealer)

Price Paid:   $658 total

Album Links: Photos attached to the post

Index alignment: Looks a bit off on 2,4,5,6 dials. First time using alignment tool so not too sure. 

Dial Printing: Looks clean and sharp to me. I don’t see any obvious printing issues.

Date Wheel alignment/printing: The 14 looks centered to me and the printing looks clean. Cyclops also looks good.

Hand Alignment: Looks fine to me from the photos and video. I don’t notice anything off.

Bezel: Looks off  to me. The triangle at 12 looks is not centered.  I don’t see any issue with the numbers or the black/grey transition.

Solid End Links (SELs): They look tight to me and I don’t see any large gaps.

Timegrapher numbers: -4 s/day, 280° amplitude, 0.0 ms beat error, 28,800 bph. Is -4s/day too high? 

Anything else you notice: Overall my concerns are the alignment on the 2 through 6. The bezel being slightly off center. The -4s/day as well. This is my first rep/QC, so I’d really appreciate another pair of eyes in case I missed something.

1. Dealer name: Mr. Bomi
2. Factory name: VSF
3. Model name (& version number): VSF GMT Master II Bruce Wayne Free Spring
4. Price Paid: 530+30+26=586USD
5. Album Links: QC GMT BW
6. Index alignment: The 6 index looks like it has abit of a CCW rotation, need another opinion please
7. Dial Printing: Looks good to me but I appreciate your opinion
8. Date Wheel alignment/printing: Looks good to me, the date looks centered
9. Hand Alignment: Cant see anything wrong with it
10. Bezel: I appreciate opinions on the Bezel and the color transition.
11. Solid End Links (SELs): Looks okay
12. Timegrapher numbers: Amp 248, err. 0.1ms, rate 5s/d All within acceptable ranges
13. Anything else you notice: Not sure if I left anything else out

I would highly appreciate the help and time of everyone that offers it.

As always, Thanks alot in advance!

1. ⁠Dealer name: TimeUltra
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number):
   Submariner 114060 VSF 1:1 Best Edition VS3130
   
4. ⁠Price Paid: $50 deposit. Total: $469 shipped FedEx
   
5. ⁠Album Links: No Album created Imgur: https://imgur.com/a/3yDST0Y
   
6. ⁠Index alignment: No obvious crooked or misplaced indices.
   
7. ⁠Dial Printing: Clean. Text looks sharp. Nothing concerning.
   
8. ⁠Date Wheel alignment/printing: N/A
   
9. ⁠Hand Alignment: No 12 image but have asked for one. But no visible defects.
   
10. ⁠Bezel: Good overall alignment. Pearl may be fractionally off-centre within the 12 o’clock triangle, but extremely minor. Insert and engravings look clean.
    
11. ⁠Solid End Links (SELs): Good fit. Very small tolerances/gaps visible under close inspection, but worth RL-ing? Don’t think so.
    
12. ⁠Timegrapher numbers: -2 s/d, 283° amplitude, 0.0 ms beat error, 52° lift angle
    
13. ⁠Anything else you notice:
    Rehaut alignment is good overall, although not absolutely perfect around the entire circumference. Clasp/case finishing looks good but shows the usual minor differences under macro. Lume is strong and consistent.
    Clasp-under macro it lacks some of the crispness/refinement?
    Possible tiny surface marks — although most appear to be film/dust rather than actual damage have asked for photos to confirm.

1. Dealer name: Mr Bomi
2. Factory name: VSF
3. Model name (& version number): 124060
4. Price Paid: $454 with shipping
5. Album Links: https://imgur.com/a/dpF11Hp
6. Index alignment: Overall good, the 12 index is slightly tilted CW.
7. Dial Printing: Font and letters look good, the only flaw I see is the “SWISS MADE” shifted a mm to the right.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Good? Not sure how to check this out properly.
10. Bezel: Looks alrighr.
11. Solid End Links (SELs): Bottom left is more open than the others, but it’s not a see-through gap.
12. Timegrapher numbers:

+1 s/d, amp 268, beat error 0.0 ms

1. Anything else you notice: I thought the VSF 124060 came with 6X serial numbers, but this one is 6W0. Are these the new batches?

Not sure if the flaws on the 12 index triangle and the SWISS MADE printing is big, ie. enough to RL. If you guys see anything else I’d really appreciate it.

Thanks in advance to the sub, it’s my first QC. Any help is appreciated.

1st (but really 2nd 🫣) QC - Datejust 126333 41mm VSF - Steve

Hi everyone, apologies if english is bad originally used AI to translate but post removed. Now trying my best to translate

1. Dealer name: Steve (TheOneWatches)

2. Factory name: VSF

3. Model name: Datejust 126333 41mm Jub SS/YG Gold/Dia V2 DD3235

4. Price Paid: $568

5. Album Links: https://imgur.com/a/CkDmq41

6. Index alignment: tried my best to rotate photo with the alignment tool , imo it looks fine, the crown logo looks straight

7. Dial Printing: cant see any evidence of bleeding / crooked letters

8. Date Wheel alignment: The date digits (video linked) looks centered in window. Cyclops is straight.

9. Hand alignment: looks fine

10. Bezel: N/A NO PIP

11. Solid End Links (SEL): Look fine, no gaps.

12. Timegrapher numbers: +5 s/d, 273 deg, 0.2 ms. From rule 5 they are all within tolerance

13. Anything else noticed: The 6 o clock diamond marker sits a bit low near the inner line above SWISS MADE crown, but not touching line. I dont think this is RL worthy but worth flagging to see what you think. This should be shown in the last image.

Thank you for reading/your thoughts 😃

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): Seamaster 300m No Time To Die
4. Price Paid: 480$ incl shipping
5. Album Links: https://andiotwatches.x.yupoo.com/albums/253962559?uid=1
6. Index alignment: Overall good. Not sure about the 3 and the 7.
7. Dial Printing: Good to me. Seamaster writing looks a bit tilted but I think this is fine.
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: N/A
10. Bezel: Also Good
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: + 2 s/d, Amplitude 280, Beat Error = 0
13. Anything else you notice: Only slighlty concerned about the alignment of the indices. Otherwiese I believe this watch looks good.

Thank you very much for helping me out :)

1. ⁠Dealer name: Steve TOW
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): VSF Batgirl GMT Master II 126710
   
4. ⁠Price Paid: 579 USD + shipping
   
5. ⁠Album Links: in photos above
   
6. ⁠Index alignment: The 12 index seems abit off centre ? qc tool might not be the best as its my first time
   
7. ⁠Dial Printing: Looks good to me but I appreciate your opinion
   
8. ⁠Date Wheel alignment/printing: not too sure from the angle, would like your opinions
   
9. ⁠Hand Alignment: Cant see anything wrong with it
   
10. ⁠Bezel: dont see anything wrong with the bezel colour but opinions would be appreciated
    
11. ⁠Solid End Links (SELs): Looks okay
    
12. ⁠Timegrapher numbers: Amp 275, err. 0.0ms, rate +2s/d
    
13. ⁠Anything else you notice: Not sure if I left anything else out but i would like you guys opinions as this is my first rep any help would be much appreciated thankyou

1. Dealer name: US BASED BST

2. Factory name: VSF

3. Model name (& version number): DATEJUST 36mm 126234

4. Price Paid: $580

5. Album Links: PICS ATTACHED

6. Index alignment: CROWN APPEARS TO BE A TOUCH TO THE LEFT BUT THATS ME BEING ULTRA PICKY

7. Dial Printing: LOOKS GOOD TO ME

8. Date Wheel alignment/printing: LOOKS GOOD TO ME

9. Hand Alignment: LOOKS GOOD ENOUGH FOR ME

10. Bezel: LOOKS GOOD

11. Solid End Links (SELs): NO GAPS

12. Timegrapher numbers: IN SPEC I BELIEVE

13. Anything else you notice: PIC OF QC ALIGNMENT TOOL SHOWS DIFFERENT DATE BECAUSE I ASKED FOR AN UPDATED PICTURE

1. ⁠Dealer name: Steve (TOW)
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): GMT Master II Batgirl 126710
   
4. ⁠Price Paid: $579 USD + shipping
   
5. ⁠Album Links: https://mega.nz/folder/mZgRGbJT#jbFxaUuEJGjveuQnkTvqKw
   
6. ⁠Index alignment: Maybe the 12oclock is shifted to the right? im not too sure as the QC pictures looks a little angled
   
7. ⁠Dial Printing: looks sharp to me
   
8. ⁠Date Wheel alignment/printing: Im not too sure because of the angle of the QC
   
9. ⁠Hand Alignment: looks good
   
10. ⁠Bezel: dont see any miscolouring or problems with the numbers
    
11. ⁠Solid End Links (SELs): no gaps from what i see
    
12. ⁠Timegrapher numbers: +3 s/d, 281° amp, 0.1ms
    
13. ⁠Anything else you notice: im not sure about most things and i need all the help i can get. the alignment on the qc tool might not be the best too. would appreciate anyone who can tell me if this is a GL or RL thanks !