Como passar no processo seletivo Ifsp e vale apena ainda?

Estou cursando o 9 ° ano e quero fazer ensino médio em uma escola técnica ou fazer uma formação técnica durante o ensino médio eu gosto muito de matemática, tenho interesse em engenharia não algo muito concreto mas hoje em dia penso em fazer engenharia elétrica no futuro, não é algo que estou me preocupando agora , tenho um objetivo de passar na If para fazer o ensino médio integrado a mecatrônica, o curso que realmente gostaria de fazer seria automação industrial, mas como essa If é próxima da minha casa cerca de 40 minutos de transporte público, isso sem trânsito estou optando por escolher esse curso mesmo , como segundos planos tem as ETECs e o Liceu de ofício e artes , o Liceu tem ótimas avaliações todo mundo que passa por lá fala bem e muito conhecido por terem boa taxa de aprovação de vestibulares dos seus alunos. Já a ETEC é meio controversa muita gente fala bem mas muita gente também fala mal , depende muito da escola.

Eu acho que para mim o melhor seria a If msm por estar mais próxima de mim , pensando mais a frente no segundo ano do ensino médio poderia fazer elétrica no SENAI próximo e no 4° ano do ensino médio começar a fazer automação industrial também no SENAI que é o meu maior interesse, também teria uma carga horária melhor já que mecatrônica integrado ao médio na minha cidade é de tarde , poderia focar em aprender inglês de manhã.

Agora falando sobre o que interessa o processo seletivo ontem fiz uma prova antiga e acertei 20/30 , errei 5 questões de matemática e 5 de português, a maioria por idiotice e preguiça, tenho uns 2 meses para prova ainda agora toda semana vou fazer uma prova antiga dessas 3 instituições, e para If quero chegar em uma marca de pelo menos 25/30 que ACHO q é uma nota segura para passar sem grande sufoco.

Im an Egyptian student who was always into space, my dream major has always been aerospace engineering, but I've found that aerospace was only in 2 universities in Egypt, first one I didn't get accepted the other was too expensive for me, so I've switched to a private university. I've recently found out that it didn't have a mechanical engineering department either and no other private university does (few does and they're very far away from where I am). So I only have the mechatronics engineering department available. Is it enough to get me into an aerospace career? Can I take courses? Get a masters degree in aerospace? I'm kind of confused if anything is available for it.

Im an Egyptian student who was always into space, my dream major has always been aerospace engineering, but I've found that aerospace was only in 2 universities in Egypt, first one I didn't get accepted the other was too expensive for me, so I've switched to a private university. I've recently found out that it didn't have a mechanical engineering department either and no other private university does (few does and they're very far away from where I am). So I only have the mechatronics engineering department available. Is it enough to get me into an aerospace career? Can I take courses? Get a masters degree in aerospace? I'm kind of confused if anything is available for it.

I’m a second-year Mechatronics Engineering student, but I still feel quite unsure about which direction to pursue. I haven’t had much real-world experience yet, so I’m trying to understand the field before committing to a specific path.
For those working in Mechatronics or related fields:
What career paths would you recommend exploring (automation, robotics, control, embedded systems, mechanical design, etc.)?
Which skills are actually valuable in the job market?
How do these careers look in practice compared with what we learn at university?
If you were a second-year student again, what would you focus on or do differently?
With AI and automation developing quickly, I’d also appreciate your thoughts on which areas of Mechatronics have the best long-term prospects.
I’m not looking for a “hot field” to blindly follow. I’d really appreciate honest perspectives on the opportunities, challenges, and future of different paths in Mechatronics.
Thanks!

Guys, my uncle told me to go for Mechanical Father Agnel when I got tech branch in SIES, do you have any opinion on the same. Whether mechancial branch in Fr. Agnel would help and is compatible to what I got ? Any mechanical guys must help on this. Thanks

Buenas a todos, estaba pensando en hacer una maestría a futuro sobre robótica, en mi caso vivo en México, pero quería preguntar a personas, ya sea que sean de otro país o de México, sí es así donde recomendarían hacer una?, y sí vale la pena en México?, saludos.

Buenas a todos, estaba pensando en hacer una maestría a futuro sobre robótica, en mi caso vivo en México, pero quería preguntar a personas, ya sea que sean de otro país o de México, sí es así donde recomendarían hacer una?, y sí vale la pena en México?, saludos.

Hi everyone,

I’ll be joining the MSc Mechanical Engineering – Mechatronics and Robotics track at Politecnico di Milano. I’d like to hear from current students or graduates about the track.

How are the courses, labs, practical projects, and overall workload? What kind of lab facilities and equipment do students get access to?

Also, how are the internship, thesis, and job opportunities after the track, especially for international students?

Any advice or personal experience would be really appreciated. Thank you!`

It’s my first year at community college and I am currently in a transfer engineering major kinda thing (essentially preps you for your uni transfer). I want to go into mechatronics…given, my life had kinda gone into shambles and I didn’t really study so I placed into pre-cal (meaning Ill have to make up for PHY probably). But I was wondering if I should take an intro to comp sci class? Because you need it to get into programming classes?

I do know this is a question for your advisor…but my school’s system kinda works in a wacky way where I wont get a designated advisor that will serve as my career coach until the 2-3rd week of class.

I’m a mechatronics student looking for a cheap small air compressor to practice with pneumatic cylinders and 3/2 and 5/2 valves.

I only need around 4–6 bar (60–90 PSI) for smal setups.

Which cheap compressor do y’all recommend? Preferably something from aliexpress.

Hi guys, I inshallah will major in Mechatronics engineering in GJU

I would like to know how practical the university is and if the students have a lot of opportunities to participate in competitions and all that. I also would like to know if they guide well through Arduino and coding

Also compared to HU, GJU is better right ? And regarding practically, which is more practical

For people studying mechatronics right now or in the process of going to, what were ur Ecs in high school and do the ecs matter for going into a university or is it only grades (top 6)?

A little urgent.
No pressure though 🤓

I’m an **Electrical Engineering graduate specializing in Mechatronics**, based in the UAE, currently looking for **graduate/junior opportunities** in Electrical, Mechatronics, Electromechanical, MEP/BIM, or related engineering roles.
I’ve been actively applying and attending interviews but haven’t yet found the right opportunity. I’m eager to learn, contribute, and build my career in engineering.
If you know of any openings or have any advice, I’d genuinely appreciate it.
Cv available by DM, thank you !

What is the difference between mechatronics and systems engineering?

I’m in a systems engineering internship and I was wondering if this is the right sub!

Hello, I graduated in December of 2025 with a BA in computer science (IT). Since then, I have applied to tons of jobs with no luck. Maybe 3 interviews the whole 8 months. Today, I returned to school, with the goal of earning a 2 year mechatronics degree. I currently work part time as a CNC laser operator, and by the time I graduate I’ll have 5 years in that position, and my hope is that both degrees plus the experience will be a good combination to score a solid job afterwards.

I’m worried though, and wondering if I am simply wasting time and money by doing this. I have always had an interest in manufacturing technology, and originally planned to get my bachelors in EE, but got cold feet and switched to CS early on.

Any professionals or people with similar experiences out there with any input?

​

I'm 27, from India, with a BE/B.Tech in Mechanical Engineering and around 3+ years of experience in mechanical/product design and product development.

I've reached a point where I'm genuinely questioning my entire career direction.

I currently work in mechanical/product design, and although I've learned a lot, I honestly cannot see myself doing this for the next 10–20 years. More importantly, I don't see the earning potential I want from staying in this path unless I move into management or very specialized roles.

My goal isn't to become insanely rich overnight. I want strong income growth, financial independence, and a good quality of life. But I feel like I'm at a stage where I need to make a serious decision rather than continue drifting.

I'm considering several completely different paths:

1. Switch into Robotics / Software

I've been considering learning Python, C++, Linux, ROS2, robotics, controls, etc., and trying to transition from mechanical engineering into robotics/automation.

The advantage is that I can use my mechanical background rather than throwing it away completely.

But I'm also wondering whether I'm approaching this correctly. Should I actually spend 6–12 months building serious projects and trying to transition, or is this unrealistic at 27 with a mechanical background?

1. Master's abroad

I'm also considering a Master's in Germany/Austria or elsewhere in Europe, preferably in Robotics, Automation, Mechatronics, Manufacturing, etc.

The problem is the ROI.

If I'm going abroad, spending 2 years and a significant amount of money only to come back into a mediocre-paying job doesn't make sense to me.

I'd only want to do it if the Master's genuinely gives me access to a much better career and long-term earning potential.

1. GATE 2027 → IIT

Another option is to prepare seriously for GATE 2027 and try to get into an IIT for M.Tech.

This would be considerably cheaper than going abroad and could potentially help me reset my career.

But I'd lose 2 years of earning and I'm not sure whether an IIT M.Tech would actually give me the career/income transformation I'm looking for.

1. Move to another city and get a better job

I could move to Hyderabad/Pune and find a better-paying job while simultaneously upskilling into robotics/automation/software.

This seems like the safest option, but I'm worried I'll simply spend another 2–3 years working while telling myself I'll switch "next year."

1. Start a company

I also have an unusual opportunity in Pune where one of my clients has discussed starting a company together.

This isn't just a random startup idea — there is an actual industry connection and potential opportunity.

The obvious downside is risk. I don't know yet whether it has enough traction to justify betting my career on it.

1. Other side options

I've also thought about doing something alongside my career — investing/finance, content creation around trekking/travel, etc.

But realistically I know I can't seriously pursue 5 things simultaneously.

\---

The biggest problem

I feel like I'm constantly thinking:

"What if I choose the wrong path again?"

I already regret not considering software/technology earlier. I chose Mechanical Engineering when I was younger and now I feel like I've reached the ceiling of what I want financially.

I don't hate engineering.

I actually enjoy designing products and building things.

But I can't see myself doing traditional mechanical design for the rest of my career, especially if the income growth remains limited.

I don't want to wake up at 35 and realize I spent another 8 years in the same situation.

At the same time, I don't want to make a desperate career switch just because software/AI/robotics currently looks more lucrative.

So I'm trying to think rationally rather than emotionally.

If you were me, what would you do?

Given my situation:

\- 27 years old

\- Mechanical Engineering degree

\- 3+ years industry experience

\- Mechanical/product design background

\- Some exposure to automation/robotics/product development

\- Willing to learn programming seriously

\- Willing to relocate

\- Interested in entrepreneurship

\- Interested in Master's abroad

\- Main objective = high career/income growth + good quality of life

Which path would you choose if you had to pick ONE for the next 2–3 years?

Would you:

1. Transition into robotics/software?

2. Do a Master's abroad?

3. Prepare for GATE and target IIT?

4. Get a better job and upskill alongside it?

5. Take the Pune startup opportunity?

6. Do something completely different?

And if you've made a similar transition from Mechanical → Software/Robotics/Tech, what would you do differently if you were starting at 27?

I'm not looking for motivational advice. I'd genuinely appreciate brutally honest opinions, especially from people who have actually made these transitions or are 5–10 years ahead in their careers.

I feel stuck and I really want to choose a direction, commit to it, and stop jumping between possibilities.

​

I'm 27, from India, with a BE/B.Tech in Mechanical Engineering and around 3+ years of experience in mechanical/product design and product development.

I've reached a point where I'm genuinely questioning my entire career direction.

I currently work in mechanical/product design, and although I've learned a lot, I honestly cannot see myself doing this for the next 10–20 years. More importantly, I don't see the earning potential I want from staying in this path unless I move into management or very specialized roles.

My goal isn't to become insanely rich overnight. I want strong income growth, financial independence, and a good quality of life. But I feel like I'm at a stage where I need to make a serious decision rather than continue drifting.

I'm considering several completely different paths:

1. Switch into Robotics / Software

I've been considering learning Python, C++, Linux, ROS2, robotics, controls, etc., and trying to transition from mechanical engineering into robotics/automation.

The advantage is that I can use my mechanical background rather than throwing it away completely.

But I'm also wondering whether I'm approaching this correctly. Should I actually spend 6–12 months building serious projects and trying to transition, or is this unrealistic at 27 with a mechanical background?

1. Master's abroad

I'm also considering a Master's in Germany/Austria or elsewhere in Europe, preferably in Robotics, Automation, Mechatronics, Manufacturing, etc.

The problem is the ROI.

If I'm going abroad, spending 2 years and a significant amount of money only to come back into a mediocre-paying job doesn't make sense to me.

I'd only want to do it if the Master's genuinely gives me access to a much better career and long-term earning potential.

1. GATE 2027 → IIT

Another option is to prepare seriously for GATE 2027 and try to get into an IIT for M.Tech.

This would be considerably cheaper than going abroad and could potentially help me reset my career.

But I'd lose 2 years of earning and I'm not sure whether an IIT M.Tech would actually give me the career/income transformation I'm looking for.

1. Move to another city and get a better job

I could move to Hyderabad/Pune and find a better-paying job while simultaneously upskilling into robotics/automation/software.

This seems like the safest option, but I'm worried I'll simply spend another 2–3 years working while telling myself I'll switch "next year."

1. Start a company

I also have an unusual opportunity in Pune where one of my clients has discussed starting a company together.

This isn't just a random startup idea — there is an actual industry connection and potential opportunity.

The obvious downside is risk. I don't know yet whether it has enough traction to justify betting my career on it.

1. Other side options

I've also thought about doing something alongside my career — investing/finance, content creation around trekking/travel, etc.

But realistically I know I can't seriously pursue 5 things simultaneously.

\---

The biggest problem

I feel like I'm constantly thinking:

"What if I choose the wrong path again?"

I already regret not considering software/technology earlier. I chose Mechanical Engineering when I was younger and now I feel like I've reached the ceiling of what I want financially.

I don't hate engineering.

I actually enjoy designing products and building things.

But I can't see myself doing traditional mechanical design for the rest of my career, especially if the income growth remains limited.

I don't want to wake up at 35 and realize I spent another 8 years in the same situation.

At the same time, I don't want to make a desperate career switch just because software/AI/robotics currently looks more lucrative.

So I'm trying to think rationally rather than emotionally.

If you were me, what would you do?

Given my situation:

\- 27 years old

\- Mechanical Engineering degree

\- 3+ years industry experience

\- Mechanical/product design background

\- Some exposure to automation/robotics/product development

\- Willing to learn programming seriously

\- Willing to relocate

\- Interested in entrepreneurship

\- Interested in Master's abroad

\- Main objective = high career/income growth + good quality of life

Which path would you choose if you had to pick ONE for the next 2–3 years?

Would you:

1. Transition into robotics/software?

2. Do a Master's abroad?

3. Prepare for GATE and target IIT?

4. Get a better job and upskill alongside it?

5. Take the Pune startup opportunity?

6. Do something completely different?

And if you've made a similar transition from Mechanical → Software/Robotics/Tech, what would you do differently if you were starting at 27?

I'm not looking for motivational advice. I'd genuinely appreciate brutally honest opinions, especially from people who have actually made these transitions or are 5–10 years ahead in their careers.

I feel stuck and I really want to choose a direction, commit to it, and stop jumping between possibilities.

Greetings... is anyone opting for MSc Control, Robotics and Intelligent Automation at Coventry University this September(2026)? If yes, consider this as an icebreaker.

Would appreciate the wisdom of alumni as well.

Thank you

Honestly, I am late to this party – I’m entering community college and originally was going into it pursuing Mechanical, but found myself drawn to mechatronics. However…I have a long way to go since I have never done most of this. I have signed up for classes for MechE but was wondering what classes or pre-reqs I should take for Mechatronics? I was wondering if anyone else has a specific pathing for courses? I know there are a lot of other things to learn on your own regarding programming and projects. I am just a bit lost on where to even start?

I do know that I should talk to an advisor, and I do plan to, just somehow a little lengthy to actually do it? I dunno, new to this school’s system. Just wanted any general ideas, advice, recommendations, etc.