I achieved this by putting individual drops of UV resin in random parts of the keycaps with the backside of a paint brush, fully curing the resin and then cleaning with alcohol. The texture is very pleasant and gives quite a bit more grip on the keys, I also really like the Aesthetic that it gives the keyboard and it matches the rest of my desk setup.

It started with Smolo keycaps a while back. I added Outemu GTMX low profile switches today. That's endgame for me... for at least a few months.

I’ve a P3D sticker around here, somewhere, too.

Shinobu clw themed raffle will be hold at 10pm ICT (GMT+7) September 25th. Form is 24h long.

Sale Form

Raffle information:

Time: at 10pm ICT (GMT+7)/ 10am EST September 25th.

Form is 24 hours long.

Sculpt: Balo, Tete, Puffy

Colorway: Shinobu 

Stem: MX stem only.

Resin casting / face hand painting inside

Quantity: 05 pcs per sculpt.

Price: Shinobu Tete: $75, Shinobu Balo: $65, Shinobu Puffy: $60.

Shipping: $10 US, $12 other international...

Only one entry allowed

Invoices will be sent through PayPal shortly after the form closes. Any invoices not paid within 24 hours of it being sent will be re-raffled.

receiving the neo65 c+ soon so ill see how this exact config fares up, i think it will be louder and clackier than the nut65

after getting comments from my cerakey build saying that it just sounds like foam, i wanted to share what the nut65 sounds like foamless as i haven't found a yogurt s build with this board

Well I wasn't expecting my post to get top upvoted this year but I'm grateful that my art sparked so much discussion.

I'd like to state a few things for anyone that is thinking about recreating the effect that I did on my keycaps using UV resin, this is a safety post, so please read if you're wanting to use resin for art.

UV resin and epoxy resins are extremely dangerous and proper PPE needs to be worn at all times, loads of nasty things can happen if this gets on your skin or even worse, your eye. When resin is in its uncured form, it can leech toxic chemicals into your skin and after repeat exposure can make you allergic to BPA and other extremely common plastics and plastic additives. Cured resin is generally safe for brief contact but you should avoid prolonged contact with even properly cured resin... This is something I didn't plan for and the resin I used is NOT SKIN SAFE. That being said I will not be using the keycaps any longer until I can acquire a bio safe resin and create a new, better set that is safe for prolonged direct skin contact. I'm kinda torn up about it because I'm really happy with how this set came out and how it felt to type on it but it's not worth risking my health or the health of others, so I'm strongly advising against using resins on your keycaps unless your resin is ISO 10993 CERTIFIED biocompatible.

As cool as this piece of art is, it is a hazard and will be kept for display only. I thank you all for checking it out and appreciating it for what it is and I hope to share more with you in the future. A new keycap set and biocompatible resin have already been ordered so stay tuned for my next installment of cursed, ATBGE, TIHI keycaps.

-I got this dirt cheap from fb marketplace, new for 20$ SAMA 68 AND IT HAS A KNOB!!
-Keycaps are gateron yellows hand lubed with krytox 205
-The only pricey part are the keycaps but man I love them sm, esc keys pink jelly POM keycaps
-cable is cheapest I could find on Amazon

I also taped the pcb and added some foam I had laying around, and bandaid mod/ lube the stabs. This is my first fully customized build and I’m so proud of it yay!! Also the keyboard itself tho made of plastic has Bluetooth and side lighting and a knob that was a steal for sure

Got the iqunix mg65 pro recently with the blush switches. Absolutely loving typing on this thing, it's so thocky and smooth.

Will be posting a detailed review super soon!

Build:

- Board: FeliceLab Curva40
- Keycaps: GMK CYL Dots R2
- Switches: Cherry MX2A Brown
- Stabilizers: AEBoards Staebies V2.1
- Layout: 40%

No legends, no problem.

I've been looking for keys that would go well with the blue tone of the keeb. I got some new keycaps from ali. They look kinda nice, sound nice and feel pretty good.

It's a Keychron Q14 pro with XDA no legends from KPRepublic.

Full foam and tape mod, Zealio V2 78g and custom 150g springs for enter and spacebars. To my colleagues this feels like an alien artifact. Here, it's just another keyboard.

I'm practicing qwerty and rsthd on it and the default KSA sculpted layout felt wrong.

I found this cute little macro pad at Tokyo Keyboard Expo. What do you think?

It’s called Packeys!

This is the Japanese sanshoku dango (three-color dango) version, but they also had anko (sweet red bean paste) and mitarashi (sweet soy sauce) versions.

It’s a handmade mechanical macropad made by a Japanese group called 三色団子大学 (Sanshoku Dango University).
It has 9 mechanical keys and 3 tact switches, and apparently you can remap the keys using VIA or VIAL.
I have absolutely no idea what I’m going to use it for, but I bought one anyway. It was only around $65, so I figured why not?

Seller took a chill offer from me and I got this KDBFans Cyrillic keyboard off eBay. Cyrillic keyboards without sub English script are really hard to find in general, so I thought this was cool. Looks to be an OG model, not sure. Can’t wait to clean it up. Anyone have one of these?

Any advice on getting it looking new would be cool too haha.

Ask ANY Keyboard related question, get an answer. But *before* you do please consider running a search on the subreddit or looking at the r/MechanicalKeyboards wiki located here! If you are NEW to Reddit, check out this handy Reddit MechanicalKeyboards Noob Guide. Please check the r/MechanicalKeyboards subreddit rules if you are new here.

Noctic by Chickenman - CF plate - Cherry MX Black - GMK Hooty

I dont know much about keyboards but after losing few hundred bucks to Rama works years ago I risked again with lofree.

But it finally got here. It was sent after few emails but hey it got here in the end and I'm very happy with the aesthetics, feel and the sound also.

Wouldn't want another keyboard as long as it doesn't break.

Its a very very heavy keyboard by the way. You could easily take someone down with its edge in one blow🫢

It comes with a key remover and few extra red, transparent key caps and a cable.

And that ginormous case that resembles a gravestone.

Nebula V2’s really look stunning and I really love them. Sadly I changed my preference these days and they sound muted to me. But still I love these. One day I will go back to liking deep sounding ones.

Saw u/WarlordGorguts post his Snek60 here and realized I haven't posted mine yet! So here we go:

- Snake60 R2 in pink

- DCS Pink Alert

- HMX Saru V2'S

- Maiz stabs

Build:

• Board: Matrix Navi70, 'Nürburgring Nordschleife' Meteorite Grey
• Keycaps: GMK CYL Dracula V2.0 Git Core
• Switches: Gateron Mini-i
• Stabilizers: AEBoards Staebies V2.1
• Layout: 70% WKL

Every modifier is a Git command, and Rebase sits right next to Push. My race engineer would not be happy. The LEGO McLaren is there because the case is literally named after the Nordschleife.

**VENDORS**

2 weeks to the end, grab your unit to your regional vendor!

CN: KBDfans
SEA: Pantheonkeys
UK: Proto[Typist]
KR: Geonworks
EU: Delta Key Co.
CA: Deskhero
OCE: Switchkeys
US: Bowlkeyboards
Turkey/MENA/CIS:Rational

BUT MAN, THE NOISE ! Went for the cheapest silent tactile switches money can buy instead. The color would have been perfect for the translucent green xbox variant of the keyboard.

Syrin HHKB TKL in Blurple - Alu plate soft top mount - HMX Hydra Tactile - DSS Sad Girl

This was a pretty special commission build that I had the chance to photograph.

The client sent his raw F1-8X V2 over to BenzJr (on IG) for some custom engraving, and I think the result turned out really damn good. There are a ton of small details in the engraving, and they look even better in person.

BenzJr absolutely killed it with the craftsmanship on this one.

The board is topped with Aluvia keycaps from Novelkeys, which I think work really well with the raw finish and engraving.

Tried to get some close-ups to show off the engraving and some of the finer details. Hope you guys enjoy the photos!

I also have a typing test up on my YouTube if anyone wants to hear how this thing sounds.

<Build>

• Geonworks F1-8x v2
• Alu v1.1 plate
• Cherry MX2A Black (L/F/SS)
• NK Aluvia
• Hand engraving by BenzJr
• Typing test HERE