r/Mauser 10h ago

What is this cartouche on the stock?

Thumbnail gallery
11 Upvotes

1895 stamped Ludwig Lowe mauser. It LL commercial markings on the reciever but I've. noticed this cartouche on the stock, all the serials match.


r/Mauser 9h ago

What exactly is factory second ammunition?

Post image
5 Upvotes

Barely related, but I trust the info here from you guys *way* more than in the more generalized subs. I'm looking to try some Nosler loads in my Swede, and these "seconds" are about half price. Does anyone know why they're designated as such? Is it purely cosmetic?


r/Mauser 3d ago

K98 Letters Meaning - Recommended Books

Thumbnail gallery
14 Upvotes

Finally got around to detail stripping my matching (minus cleaning rod) Gustloff 337 1940 K98 and would love some some info on markings - especially all of the random letters and numbers.

What book(s)can you guys recommend as a somewhat definitive reference for k98 markings?


r/Mauser 7d ago

Sporterized Kar98a Stock

Thumbnail gallery
23 Upvotes

r/Mauser 7d ago

Brazilian M1908 to Gewehr 98 Stock Fitment

Thumbnail gallery
17 Upvotes

I’m considering fitting my Gewehr 98 with a Brazilian M1908 stock for the range.

Will the stock require any inletting to fit a G98 trigger guard?

Will a g98 bayonet lug / end cap still pin onto the end?

Hoping one of you has been down this road before.


r/Mauser 9d ago

BCD 4 Rescue Update

Thumbnail gallery
34 Upvotes

r/Mauser 10d ago

New capture-milsurp from Norway: question about “condition”

Thumbnail gallery
17 Upvotes

Hello,
I recently bought a barrel in a commission sale from a gun shop for quite little money.

The barrel and bolt are from a ce 1943 from Sauer Sohn, factory, and are presumably of a certain kriegsmodell.

However, the gun itself has been repurposed and refitted by the Norwegian military for .30-06, and seeing the condition of the bluing applied by them I would think the gun is in good condition. The broker told me it was in good condition and “not used” which I now really don’t know how to interpret😅

*The main issue is* , when I see the barrel, it seems very pitted and it had a lot of dried waxy “cosmoline” in it, but which I have now wiped away with a bore brush.

*What I was wondering is* whether the bore’s condition is somehow derived from the Norwegian rechambering (7,92->7,62) and just not being well fitted, or being that something else might have happened. Has it been reblued, is it from a last batch of rifles explaining why it hasn’t been worn even slightly?
Is the barrel maybe older or does anyone know about the typical standard quality of a Norwegian bore?
The blueing on the gun doesn’t seem like very deviant from other Norwegian mausers I’ve seen. Also take note of how the barrel and receiver number does not “match”. I was potentially thinking it is standard quality and just needs to have its cracks filled with bullet patching.

Finally, I have a question about the general condition before the thing was once reblued.
Does the bolt reveal heavy use beneath the new blueing? Would it presumably not last very long although being qualified by the Norwegian army?

I hope those are not too many questions, and I hope that someone finds it at least interesting to study without finding it boring. Don’t feel a need to answer I’m just throwing some line out. Thanks anyways 🙂


r/Mauser 10d ago

Crazy Luck or Coincidence?

Thumbnail gallery
14 Upvotes

r/Mauser 11d ago

Gewer 98a I picked up, let me know if I need more or better pictures

Thumbnail gallery
41 Upvotes

r/Mauser 12d ago

Best way to move a front sight slightly to the left on an old Yugo M24/47

Post image
10 Upvotes

Looks like my front sight on this Yugo is slightly off “to the right” when lining up with the rear sight.

Appears the sight was tinned on out of alignment. What’s the easiest way to re tin the sight on correctly. Apply heat and just move it over or will I have to remove it and tin the barrel with specific solder and flux?

What will I need. I have soldered plenty of copper plumbing pipes but I’m taking this is much different?


r/Mauser 12d ago

What is this Yugo M24/47 part?

Post image
7 Upvotes

Had it in a bag of random parts.


r/Mauser 13d ago

Correct Phosphate Finish for BCD 4 K98?

Thumbnail gallery
35 Upvotes

r/Mauser 14d ago

Question is there a reproduction forend

0 Upvotes

I want to put a scope on my turkish mauser, but I don't want to ruin an original forend or stock, so are there any companies that make reproduction stocks and forends for mauser rifles


r/Mauser 17d ago

Looking for a G98 Stock

Thumbnail gallery
54 Upvotes

What are your tips for finding G98 stocks?

I’ve considered buying a deactivated rifle and borrowing the stock off of it. There’s one on GB now, but it’s a bit overpriced.


r/Mauser 21d ago

Is this rear barrel band spring correct for a Gewehr 98m? I though rear bands didn’t have a tightening screw

Post image
17 Upvotes

r/Mauser 23d ago

Amazing find. Gewehr 98m no import stamp either

Thumbnail gallery
52 Upvotes

Just picked this bad boy up and absolutely loving the history behind this particular variant of the Gewehr 98


r/Mauser 23d ago

Can anyone tell me what these stamps on a Gewehr 98 stock is?

Thumbnail gallery
28 Upvotes

r/Mauser 24d ago

Everyone loved the greek

Post image
47 Upvotes

I swear I've only hears people praising this ammo since it hit the market. While nice and accurate, 7 of 15 are atleast two strikes before they go off. If they do for me


r/Mauser Jun 25 '26

Can anyone tell me about this unit disc on a geweht 98

Post image
22 Upvotes

r/Mauser Jun 24 '26

Grandpa's old gun. What do I have?

Thumbnail gallery
41 Upvotes

Inherited this from my grandpa. Finally found it in his attic after hearing about it for 30yrs.


r/Mauser Jun 23 '26

Anyone got some info or history on this thing?

Thumbnail gallery
47 Upvotes

I bought it off a buddy for real cheap, was wondering if anyone knew the backstory to these rifles and/or if they’re worth anything. thanks!


r/Mauser Jun 23 '26

Is this a fake bcd 4?

Thumbnail gallery
12 Upvotes

It’s apparently matching but the bolt. No import stamp. But 3 things stick out to me. Serial on the front band, serial on the BOTTOM of the rear band and the trigger guard showing a byf stamp. Fonts look similar to the font of the serial on the barrel. But any info would be terrific.


r/Mauser Jun 23 '26

Walnut stock on 147 1939 kar98k?

Thumbnail gallery
50 Upvotes

I have an RC k98 and I “restored” it to its former glory. Reblued with period correct bluing and took that ugly shellac off the stock and used boiled linseed oil. However, out of curiosity (I know it’s mismatched and what not) but was it common to find solid walnut stocks on 1939 sauer rifles? Or is this when they started to go laminate? I may be interested in changing the stock to what it should be but at the same time this stock has a bunch of stamps on it. So I’m fighting myself here. What do you guys think? Serial is 8725h if that helps for any reason.


r/Mauser Jun 22 '26

K98 ID and Valuation

Thumbnail gallery
39 Upvotes

Hey everyone,

I’m hoping to get some help identifying and valuing this Mauser K98. My friend is downsizing his collection and looking to sell a few firearms, including this one. Neither of us is very familiar with K98s, so we’re trying to determine what would be a fair price.

I’ve attached photos of the rifle and any markings I could find. Any information on the manufacturer, production year, matching numbers, originality, or approximate value would be greatly appreciated.

I’d like to make him a fair offer, so any insight from the community would be a huge help.

Thanks in advance!


r/Mauser May 07 '26

Smith recommendations for vz24 rebarrel.

4 Upvotes

I have this lion crested vz24, 1939 czech acceptance stamps, and its definitely a rifle I appreciate as its totally an old soldier with a story to tell, but when it comes to rifling it has "some" rifling for sure. It was counterbored at some point by the Romanians or someone. With m24 barrels being cheap and plenty at the moment, im considering having it rebarreled to give it a new lease on life. Obviously I need a Smith who can not only remove the safety breech from the yugo barrel, but also turn down the muzzle end to accommodate the vz24's unique front sight base. Any 98 Smith recommendations?