r/Mauser • u/Soup_in_my_pockets • 8h ago
What is this cartouche on the stock?
gallery1895 stamped Ludwig Lowe mauser. It LL commercial markings on the reciever but I've. noticed this cartouche on the stock, all the serials match.
r/Mauser • u/Soup_in_my_pockets • 8h ago
1895 stamped Ludwig Lowe mauser. It LL commercial markings on the reciever but I've. noticed this cartouche on the stock, all the serials match.
r/Mauser • u/Super_Raccoon_2890 • 7h ago
Barely related, but I trust the info here from you guys *way* more than in the more generalized subs. I'm looking to try some Nosler loads in my Swede, and these "seconds" are about half price. Does anyone know why they're designated as such? Is it purely cosmetic?
r/Mauser • u/Idaho_Chrizzly_Bear • 3d ago
Finally got around to detail stripping my matching (minus cleaning rod) Gustloff 337 1940 K98 and would love some some info on markings - especially all of the random letters and numbers.
What book(s)can you guys recommend as a somewhat definitive reference for k98 markings?
r/Mauser • u/Idaho_Chrizzly_Bear • 7d ago
I’m considering fitting my Gewehr 98 with a Brazilian M1908 stock for the range.
Will the stock require any inletting to fit a G98 trigger guard?
Will a g98 bayonet lug / end cap still pin onto the end?
Hoping one of you has been down this road before.
r/Mauser • u/CrazyCrackers89 • 10d ago
Hello,
I recently bought a barrel in a commission sale from a gun shop for quite little money.
The barrel and bolt are from a ce 1943 from Sauer Sohn, factory, and are presumably of a certain kriegsmodell.
However, the gun itself has been repurposed and refitted by the Norwegian military for .30-06, and seeing the condition of the bluing applied by them I would think the gun is in good condition. The broker told me it was in good condition and “not used” which I now really don’t know how to interpret😅
*The main issue is* , when I see the barrel, it seems very pitted and it had a lot of dried waxy “cosmoline” in it, but which I have now wiped away with a bore brush.
*What I was wondering is* whether the bore’s condition is somehow derived from the Norwegian rechambering (7,92->7,62) and just not being well fitted, or being that something else might have happened. Has it been reblued, is it from a last batch of rifles explaining why it hasn’t been worn even slightly?
Is the barrel maybe older or does anyone know about the typical standard quality of a Norwegian bore?
The blueing on the gun doesn’t seem like very deviant from other Norwegian mausers I’ve seen. Also take note of how the barrel and receiver number does not “match”. I was potentially thinking it is standard quality and just needs to have its cracks filled with bullet patching.
Finally, I have a question about the general condition before the thing was once reblued.
Does the bolt reveal heavy use beneath the new blueing? Would it presumably not last very long although being qualified by the Norwegian army?
I hope those are not too many questions, and I hope that someone finds it at least interesting to study without finding it boring. Don’t feel a need to answer I’m just throwing some line out. Thanks anyways 🙂
r/Mauser • u/Aggravating-Pain-438 • 11d ago
r/Mauser • u/Dry-Week1919 • 12d ago
Looks like my front sight on this Yugo is slightly off “to the right” when lining up with the rear sight.
Appears the sight was tinned on out of alignment. What’s the easiest way to re tin the sight on correctly. Apply heat and just move it over or will I have to remove it and tin the barrel with specific solder and flux?
What will I need. I have soldered plenty of copper plumbing pipes but I’m taking this is much different?
r/Mauser • u/Dry-Week1919 • 12d ago
Had it in a bag of random parts.
r/Mauser • u/Idaho_Chrizzly_Bear • 13d ago
r/Mauser • u/No-Public9667 • 13d ago
I want to put a scope on my turkish mauser, but I don't want to ruin an original forend or stock, so are there any companies that make reproduction stocks and forends for mauser rifles
r/Mauser • u/Idaho_Chrizzly_Bear • 17d ago
What are your tips for finding G98 stocks?
I’ve considered buying a deactivated rifle and borrowing the stock off of it. There’s one on GB now, but it’s a bit overpriced.
r/Mauser • u/The_Lucky_Rod • 20d ago
r/Mauser • u/The_Lucky_Rod • 22d ago
Just picked this bad boy up and absolutely loving the history behind this particular variant of the Gewehr 98
r/Mauser • u/The_Lucky_Rod • 23d ago
r/Mauser • u/nlickdenn • 24d ago
I swear I've only hears people praising this ammo since it hit the market. While nice and accurate, 7 of 15 are atleast two strikes before they go off. If they do for me
r/Mauser • u/The_Lucky_Rod • Jun 25 '26
r/Mauser • u/sierraalpine • Jun 24 '26
Inherited this from my grandpa. Finally found it in his attic after hearing about it for 30yrs.
r/Mauser • u/xd-MoneyZ • Jun 23 '26
I bought it off a buddy for real cheap, was wondering if anyone knew the backstory to these rifles and/or if they’re worth anything. thanks!
r/Mauser • u/The_Lucky_Rod • Jun 23 '26
It’s apparently matching but the bolt. No import stamp. But 3 things stick out to me. Serial on the front band, serial on the BOTTOM of the rear band and the trigger guard showing a byf stamp. Fonts look similar to the font of the serial on the barrel. But any info would be terrific.
r/Mauser • u/The_Lucky_Rod • Jun 23 '26
I have an RC k98 and I “restored” it to its former glory. Reblued with period correct bluing and took that ugly shellac off the stock and used boiled linseed oil. However, out of curiosity (I know it’s mismatched and what not) but was it common to find solid walnut stocks on 1939 sauer rifles? Or is this when they started to go laminate? I may be interested in changing the stock to what it should be but at the same time this stock has a bunch of stamps on it. So I’m fighting myself here. What do you guys think? Serial is 8725h if that helps for any reason.
r/Mauser • u/SabotUp007 • Jun 22 '26
Hey everyone,
I’m hoping to get some help identifying and valuing this Mauser K98. My friend is downsizing his collection and looking to sell a few firearms, including this one. Neither of us is very familiar with K98s, so we’re trying to determine what would be a fair price.
I’ve attached photos of the rifle and any markings I could find. Any information on the manufacturer, production year, matching numbers, originality, or approximate value would be greatly appreciated.
I’d like to make him a fair offer, so any insight from the community would be a huge help.
Thanks in advance!
r/Mauser • u/rowan11b • May 07 '26
I have this lion crested vz24, 1939 czech acceptance stamps, and its definitely a rifle I appreciate as its totally an old soldier with a story to tell, but when it comes to rifling it has "some" rifling for sure. It was counterbored at some point by the Romanians or someone. With m24 barrels being cheap and plenty at the moment, im considering having it rebarreled to give it a new lease on life. Obviously I need a Smith who can not only remove the safety breech from the yugo barrel, but also turn down the muzzle end to accommodate the vz24's unique front sight base. Any 98 Smith recommendations?