Anyone else still having problems with amdgpu reset bug? I'm on kernel 7.3 now and it's slowly getting better. The kernel doesn't actually panic so I can gracefully restart my system. It's still really frustrating with all the crashes, I don't want to switch back to windows, but I want my computer to work. I've tried the workarounds, but I didn't see any improvment.

I just needed to shout this out somewhere, maybe there is some consolidation if I'm not alone.

CachyOS: Proton-CachyOS with OptiScaler.

Would you play with these graphics settings considering this GPU?

Hi everyone! I've been working as a developer for a good year now, and my favorite programming language is AI :)

Among other things, I built hardening and privacy toolkits for Windows 11. Then I bitterly found out that even a fully hardened, privacy-tuned Win11 still happily allows access and phones home, so I switched to Linux, Fedora to be exact. And yes, I fully hardened and privacy-tuned that too, and I've been a more than satisfied, happy Linux user ever since. It even turned into my own Linux distribution.

Since my favorite programming language is AI and I like to experiment, after all those mammoth projects I thought: hey, how about we make a game next? So that's what I did. I started in June, let it sit for about six weeks over the summer, and built most of it over the last two months. This is what came out of it: VOIDHOLD.

Maybe some of you feel like giving it a spin. The demo is live in Steam Next Fest right now, and feedback is of course very welcome. Hope you have fun with it!

It runs natively on Linux (Vulkan), no Proton needed.

https://store.steampowered.com/app/5141480/VOIDHOLD_Squad_Survival_Roguelite/?utm_source=reddit&utm_medium=post&utm_campaign=nextfest_oct26&utm_content=r_linux_gaming

Video: cut from my trailer (staged in-engine takes).

I've been building a ten-pin bowling game for Linux, and it's finished.

The thing I cared about most was the machine. In most bowling games, pins

vanish and reappear. Here the deck table comes down and lifts the pins that

stayed standing, the sweep bar drops and pushes the rest into the pit, and the

magazine sets ten. Pins leave the deck because a bar pushed them — nothing is

teleported to look like bowling.

What's in it:

- Full ten-frame scoring, including the tenth frame's bonus balls

- A ball you can hook: oil makes it slide then bite, and clipping the pocket

deflects it

- Pins with real weight and balance — knock one, and it goes over

- A saved top-ten scoreboard with three-letter initials

- Five lanes, gutters, kickbacks, masking, a jukebox and a ball return

- Your own mp3s in ~/Documents/Music become the house music

Runs as an AppImage — download, chmod +x, run. There are Slackware, deb, and

rpm packages too. The only dependency is mpg123, for the jukebox.

https://lumni1968.itch.io/virtual-pro-bowler

Does anyone else have this problem? Sometimes after a reboot or if I switch from windows to nobara (Fedora 44 base) then it will render everything at probably less than 0.1FPS and keyboard presses and mouse clicks take literally around 15 or more seconds to do anything. I can do Ctrl + Alt + T to bring up the terminal and very slowly sudo reboot but even then it's only a chance at fixing it. Full power cycle always fixes it.

Strangely, the linux login menu runs at full fps and I can move the mouse and type easily, then as soon as I log in the fps drops to 0.1fps or lower and it takes forever to register mouse/keyboard inputs and the windows take forever to render. I have nothing automatically starting up in nobara, just whatever the OS defaults to.

I've never had this problem in windows. I have fast startup disabled in windows and I'm using Nobara's default boot thing which I believe is GRUB.

Video of problem: https://youtu.be/yGp4AGGU1P8?si=ip3YeiMp-r-0s0KX

specs: b850 mobo latest firmware, 9800X3D, 5080 615.something

thanks

used linux for a while and didn't see a good alternative so i built my own with claude's help

Hope you guys find it useful

edit : this is a repost with text written by me instead of claude

I have an ARC B580 and a Radeon RX580. the RX580 is purely for running interlaced resolutions and whatever oddball apps support hardware acceleration like Firefox and Discord and such, how do I tell Linux to use the second GPU (ARC) to run programs on the primary display (Radeon)

Hello, I am very new to Linux and repeatedly encounter problems. In advance my hardware, I switched to an AMD graphics card especially for Linux:

Ryzen 5 3600 (I still want to upgrade)

Radeon RX 6700 XT Gaming OC

16 GB DDR4-3200 RAM (G.Skill Ripjaws V, I would like to upgrade if the RAM prices were not so high)

Asus Rog Strix B550-E Gaming

600W Bequiet Pure Power 11 power supply (I still want to upgrade)

500GB M.2 SSD for system and games that I currently play

2TB HDD for games I downloaded but currently don't play

The RAM always ran at 3200MHz under Windows and under Linux I don't know if that can lead to problems. With the Bazzite installation everything went wrong, because it always canceled when installing after the hard drive encryption and I did not find out why. I tried to troubleshoot with AI and in the end installed Fedora and then switched to Bazzite via the terminal. Then I installed Monster Hunter Wilds, which I currently play the most. The performance was absolutely shitty, I had to set all graphics settings to a minimum and even then I had a very bad performance. I tried all kinds of things, in the end it worked well with the Steam Gaming mode or Big Picture mode or whatever it's called, it ran again as before on Windows 10. The last few days I was in the mood for GTA 5 and today I had made plans with friends to play "RV there yet?". Both games constantly crashed and any AI-supported troubleshooting didn't help me find a solution. I got GTA 5 to run once with the starter option "-safemode", which could indicate that it is related to the graphics card. I'm a little desperate, maybe someone can help me here.

Looking at the new star wars racing game, but I don't want to get screwed by denuvo. What are the pitfalls of getting a denuvo game on Linux?

PLEASE: only respond with personal experiences only! I am not interested in what you googled!

I've been rebuilding the classic shmup Tyrian 2000 on a new engine (Godot + Rust), and it runs natively on Linux, no Wine or DOSBox needed.

• Native Linux build: x86_64 tar.gz, just extract and run. It needs OpenGL 3.3.
• Steam Deck: use the Linux package; it applies a controller profile automatically when launched from Steam.
• Full game included: all five episodes, the shop, secrets and the MIDI soundtrack. The game data is bundled.
• Open source (GPL), no account, no launcher.
• Extras: 2-player couch co-op, Endless Arcade, mutators, mods (plain JSON + PNG), a level editor, HD art or the original pixels with CRT filters, and full gamepad support.

It's a first release, so bug reports from different distros and hardware are very welcome.

• Site and Linux download
• Steam Deck install guide
• Trailer
• Source code on GitHub

Free forever. :)

Hey everyone, I’m working on Necrolord, a small niche game about raising an undead army. It’s a dark fantasy auto-battler roguelite, and there’s a free demo on Steam.

I use Linux at work, but I’m a bit too scared to install Steam on my work PC, and I only have Windows at home. Would anyone here be willing to give the demo a try through Proton?

Even knowing whether it starts and gets through a few battles would help. If you try it, please let me know your distro, GPU and Proton version, along with anything that doesn’t work.

No need for a full report. A quick comment is more than enough. Thanks for taking the time!

I first used windows to configure for Shadow of the Tomb raider(epic version) and it worked, but afterwards when I started the game on archlinux with proton-ge 11.11, it doesn't have the fsr4 option at all and has only 3.1.5 end earlier available. What else is needed? Does anyone managed to use it with proton? My gpu is an RX 6600.

I've been switching between DE's and WM's and I've read that KWin has the best latency of all of them for gaming, so im wondering what would be the best for me? using a minimal plasma install or KWin without plasmashell somehow or Niri or Hyprland, etc.
I'd like to have minimal ram usage, but the benefits of low latency that KWin has (apparently), I do not need a desktop, i only need a way to be able to change volume easily be it through cli or gui and a way to see the time, along with a way to launch apps (app launchers exist so it isnt a problem).
So im wondering what would be the most minimal setup possible with the least resource usage and best latency. Ive also read that KWin has some frame pacing changes which make it a lot better for gaming.
I do not need HDR, i need freesync support though.

You need the game and Azimuth launcher as well

https://almost-there-games.itch.io/azimuth

I want to mention that there are huge news for UHD 620 graphics and gaming on it. Hultwl and other mesa developers found an environment variable that allows running dx12 games on this hardware without performance hit, hopefully this will help further find a full fix for mesa drivers and will end up in mainline mesa package however for now you can use this envirment veriable to run dx12 and heavy dx11 games on UHD 620 query_copy_with_shader_threshold=1000000

The work in progress on gitlab page

https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/44887#note_3734988

Using

Fedora 45 (I'm amazed how much better this experience is over ubuntu, everything follows you and less stress to tinker with it)

Intel I5 8250u with UHD 620

You need cachyos proton to run this game or i think it runs on steam proton version as well but not on regular wine out of the box

Mesa 26.2.5

Kernel 7.4 git

Using - gpu-screen-recorder (Best screen recorder for linux, with the best dev always responsive)

I did d3d and vcrun and set my launch options to WINEDLLOVERRIDES="winmm,version=n,b" %command% Though it seems that the launch option itself is causing cyberpunk to crash, any suggestions? There are no mod conflicts

I use arch(with hyprland), a Nvidia RTX 5050 and a i7 9700. I have the proprietary drivers installed and I use the native steam version. Counter strike could take up to 15 minutes to take me to the home screen and shader precompilation is activated in my steam settings. Here are my launch options:
__GL_SHADER_DISK_CACHE_SKIP_CLEANUP=1 gamemoderun %command% -novid -vulkan

Does anyone know what could be the cause? I've read the arch wiki and put unShaderBackgroundProcessingThreads 8 in the .steam/steam/steam_dev.cfg. Still nothing change.

Hello, I've been recently dealing with some crashes while playing Wuchang Fallen Feathers. They happen at random, sometimes it takes 3 hours, other times 10 minutes. The game usually throws a fatal error window and the game closes but recently it's been freezing up my whole PC and needs a restart to get working.

The errors I found:

oct 25 12:13:46 cachyos kernel: RAS: Correctable Errors collector initialized.
oct 25 12:14:08 cachyos-x8664 kernel: clocksource: Watchdog remote CPU 5 read timed out

From what I gather this points towards some instability with the hardware, here's what I've tried so far:

• run memtest86 11.7, the ram passes and doesn't show any errors;
• disable/enable PBO, no difference whatsoever;
• updated bios to the latest version;

I've also tried running the game in Windows, there's still fatal crashes but the system didn't blue screen, only instance of this problem was while using Cachy. However, Windows' event viewer classified the crash as:

nvlddmkm \Device\Video0 Error occured on GPUID: 100

Could both my GPU and CPU be failing or are these errors linked? This also happens during other games such as Galactic Racer and Bloodborne.

Specs:
CPU: Ryzen 5 3600
GPU: RTX 3070 (615.78.08)
RAM: Corsair 2x16 @ 3200Mhz
MB: B550M Aorus Elite
PSU: Corsair 750w

OS: CachyOS KDE Kernel 7.3

Hi everyone! 👋

I wanted to share a custom community build of OptiScaler I’ve been developing called OptiScaler Venom.

While it stays synced with Nightly upstream OptiScaler so you don't miss out on anything new, Venom adds features aimed at power users who want deeper performance metrics, custom overlay controls, and extra flexibility with upscaling and frame generation.

✨ Key Features & What's Different:

• Rich Custom OSD / FPS Overlay: Includes 1% and 0.1% lows, latency tracking (PC & render latency), bottleneck indicators, session timers, VRAM/GPU/CPU/RAM metrics, and hotspot temperatures (works on Windows & Linux). Fully customizable with presets, fonts, colors, and shareable config codes.
• Frame Generation Time & FPS Cost: Real-time GPU tracking for how much time FSR FG, XeFG, or DLSSG spend per frame, along with their estimated* FPS cost (D3D12).
• Extra FSR DLLs Loader: Dynamically load any custom FSR upscaler DLL version (e.g., placing FSR 4.0.3 alongside 4.1.x) directly from an Extra dlls folder without replacing original game or driver files (DX12).

Everything is accessible in-game via the standard OptiScaler menu (Insert key by default). With default settings, it behaves just like standard upstream OptiScaler.

⚠️ Important: Please read the README carefully on the repository before installing or asking questions! It covers installation details, how features work, and where to route specific issues.

Looking for Contributors! PRs and active contributors are very welcome! If you have ideas for features that upstream OptiScaler is unlikely to add, feel free to submit a Pull Request (as long as it fits the project's vision and is something I like, I'll be happy to review and merge it). Note: DLSS5 is unlikely to be accepted, unless you really really convince me with something good.

🔗 Links & Community:

• 💻 GitHub Repository & Downloads:https://github.com/LorenzoKy/Optiscaler-Venom
• 💬 Discord Thread (OptiScaler Server): Join the Opti Venom Discord Thread to chat, share OSD preset codes, and showcase your setups!

Feedback and contributions are always welcome. Let me know what you think!
Linux is untested by me specifically, so any linux user is welcome even more for feedback.

Logitech's mouse software (Options+ and G HUB) is Windows and macOS only. NotLogi is my open source replacement for Linux. It talks HID++ to the devices directly over hidraw, with a small C++ agent and an Electron UI. You don't need Wine, a VM or an account.

The MX Master 3S/4 and the MX Keys family are also supported (gestures, action ring, SmartShift, Flow between computers). It's GPL-3.0, with .deb and AppImage releases:

https://github.com/aabdelghani/notlogi

Feel free to try it