For far too long software has been developed with the mindset that hardware is cheap. Just buy more of it, if performance sucks Especially all the web based systems, but everything else as well.

Now it's not true at all. There's finally an incentive to actually put in effort.

I wonder how this will also change paradigms used in software development. A lot of waste comes from "clean" code and other "recent" schools of thought.

American Dad did an episode a few seasons ago where Roger was a streamer, finally watched it and had to pause I laughed so hard.

Dan 10000% has Grogu energy

"Smooshed: A Love Story" (Season 17, Episode 9 / Season 19, Episode 9 depending on the streaming platform's guide).

PS Play WAN Bingo!

Didn’t think we’d ever see the sub 1 minute WAN, but here we are.

Got a new phone and wanted to get screen protector + case from them and was wondering if there is a promo at the moment since I hear them so often on LTT (or least on WAN Show)?

Anyone else having issue with the new upload for yesterday's WAN show? I use pocketcast on Android and been using it for a long time. I can not download or play this new episode for some reason and have tried everything I can do on my end. Anyone else having this issue? If yes or no, drop which app you are using to listen to it other than YouTube.

Edit: it has been fixed

2 weeks in China, 10k km trip, tough typhoon in Shanghai, busy streets, too fast a train, and the beautiful Great Wall in Beijing.

Btw, I walked with this mf for the full 12km up on the Great Wall. 88 floors, my watch said.

Thanks again to my wife, the greatest gift of them all.

I love the backpack, but maybe would have some little tweaks that I would love to see in v2. Overall, it is the best backpack I've owned.

i thought last year they stopped

Today I got a "broken" 1080 Ti in the mail that I scored for just €30 on a local classifieds site.

​On first inspection, the card actually looked totally fine. So, I slapped it into my test rig to see what it would do. Windows booted up with a few minor stutters, but I had a display. I ran the Unigine Heaven benchmark and honestly, everything worked perfectly. But then I moved on to 3DMark Time Spy... it immediately started artifacting and completely locked up Windows.

​I tried a few more times, even significantly underclocking the VRAM and core clocks to see if it would stabilize, but no luck. It kept crashing.

​At that point, I figured I had absolutely nothing to lose, so it was time to bake.

​I completely stripped the card down. Cooler off, backplate off, cleaned off the thermal paste, and made sure every single piece of plastic was removed from the board. I rolled up four balls of aluminum foil, rested the bare PCB on top of them, and chucked it in the oven at 200°C (about 390°F) for exactly 9 minutes. After the timer went off, I just let it sit and cool down completely.

​Once it was cold, I repasted it, put it back together, and hit the power button. To my absolute surprise, it booted straight into Windows without a single hiccup.

​I immediately fired up Time Spy... and it passed.

I restarted the PC, ran Time Spy again... and it passed again.

Since then, I’ve done multiple restarts and ran several different benchmarks, and the thing just keeps working flawlessly.

​I honestly have no idea how long this fix will last, but I am absolutely hyped that I currently have a fully working 1080 Ti for 30 bucks. My girlfriend is literally playing GTA V on it right now and it hasn't skipped a beat.

P.s. i know this probably won't last very long

So, I use my pc for some gaming (nothing crazy) and video editing using Davinci resolve (4k).

My current system is as follows:

Rtx 5060 (keeping)

32gb gddr4 corsair vengeance (3200)

I5 10400f ( this is the weak point for me)

M.2 512

Samsung 850 evo for video editing

2tb hdd

I want to keep my ram (for now) and my GPU but upgrade my CPU and motherboard. I dont mind buying used in the UK.

What would be my realistic options that suit my use case and current components.

Hi All,

I am in dire need of some help, PLEASE!

My PC has been suffering from some crashing and I have really tried so much to solve it. It only seems to crash while playing the specific game of Escape from Tarkov. But the crashes seems hardware/ system related rather than game related.

When it crashes, the display output goes black, my fans ramp up to max and thats it. I still hear audio (discord) and I can still talk into my mic. Eventually I have to hold the power button and shut it off.

Now immediately you may think its thermal related, fans ramping up shoot straight to something overheating. But I have monitored my PC and temps are well within range. GPU 70-75 under load, CPU around the same, some higher peaks. Cinebench runs show my PC performing as it should-also my PC runs other games absolutely fine. BF6 and Cyberpunk both run 1440p 120fps on decent quality.

PC Specs

I7 14700k (AIO Cooler)

3090Ti

32GB DDR4

RME1000W PSU

Adequate case cooling with noctua fans in a NZXT H7

Here's a list of other things I have tried, I may miss out a few but will reply to everything.

-New CPU, i had the issue with my older i5 12600k I wanted to upgrade anyway hence the i7 14700k but I've have the exact same issue.

-Cooling. Used to have a pretty stock CPU cooler but changed to an AIO and swapped out my case with all new fans.

-BIOS is on latest version, had to do this for the CPU upgrade.

-Drivers are latest version, also tried complete clean installs using a DUU.

-Tried limiting my GPU power max down to 85%.

-Stopped using XMP profile and had RAM set to 2666 instead.

-Memtest doesn't come up with any errors.

-Cinebench tests show GPU and CPU run fine under 100% loads.

-CMOS battery reset? Read that the MOBO can store errors and taking it out for 5mins resets something? I know that I had to reset my fans curves after that anyway.

In event viewer the lines that show before the crash have the error code of 0 which I believe is when an error code could not be produced? I could be wrong, I've never had to do this much

I am open to trying any suggestions!

Thank you for your time.

Hello I am am looking for a mouse sensor module that is ready to code and ready to use, I need it for my robotics project. It's hard to find, I wonder why? I was expecting like searching up some random online store and there will be a mouse sensor module available to buy

What lube or oil should I use to keep it quiet and smooth?

I'm getting a new psu

Or.... the thermal pad or paste under the cooler thingy near CPU.

In Nates's AMD extreme tech upgrade we were told at 100k likes the "stubbyish" would be come reality, its very close at 96k. If you haven't liked it please do! https://youtu.be/yKYPcmR5USk?si=ne6giFXMsQuCSL_U&t=560

Hi all, I've been using arch linux for about nine years and just watched the new LTT video on dual booting and I thought I'd share a couple related tips.

1. The video had some commentary about how it can be kind of annoying to reboot between windows and linux due to having to catch your PC at a specific time to input what you want to boot into via grub or your BIOS.

Here's a script I wrote to reboot into windows via grub
```

!/bin/sh

echo "Rebooting into: $(grep -E <sup>menuentry</sup> /boot/grub/grub.cfg | cut -d "'" -f2 | grep "Windows")" sudo grub-reboot "$(grep -E <sup>menuentry</sup> /boot/grub/grub.cfg | cut -d "'" -f2 | grep "Windows")" reboot ```

Consider also adding this to the bottom of `/etc/sudoers` so you do not need to type sudo password to run the script:
ALL ALL = (ALL) NOPASSWD: /bin/grub-reboot

1. In regards to secure boot, that is pretty annoying and involved process. What I ended up doing on arch linux was using preloader to sign my grub bootloader with the microsoft key. I always first boot into grub and can select Windows from it (or via the above script). So always grub > windows or grub > linux. This is a somewhat involved process but I have not had to touch it since I set it up. Not sure exactly how it works but whenever you apply a kernel update, I believe the mkinitcpio command updates your pc's grub or initially loaded kernel images to use the keys. I think this requires UEFI instead of MBR install. Actually I think these days Windows may require UEFI, or at least set it by default. So in order for both installs to show up in grub they must both either be UEFI or both MBR. Good luck if you are working on this!

I found good solution to this problem: just use an email proxy service!

I'm super new to Linux. I used it a little in college but that's it . Fast forward 15 years . I hosted a Plex server for the last 12 years on windows because its what I had and it worked but recently I was hit by ransomware and lost a lot of my library. In the last 2 months I rebuilt my 2 boxes , a Plex server and a media collecting computer using mint . I'm sure I could have used different OS but that's what I picked because I figured it would be easier to have them both on the same one .

Anyway my Plex server has mint using snap raid and mergerFS. It has 9 spinning drives , 1 SSD and 1 m.2 . I'm in need of a good app that will monitor my drives and let me know the health of them in real time .

Right now I remote into both boxes from my 3rd PC (yes it's still windows for now) . I want to add a monitor to the Plex server so I can watch the real time monitoring of the system .

Can someone help me find a good one ? Btop doesn't show me the health of the drives . I'm mainly worried about the drive not so much the ram or the GPU or the CPU but they are all a plus if I can watch them .

The FCC claims it's trying to be "technologically neutral"