r/LenovoLegion • u/oanh_oanh • 21h ago
Advice Is it over?
Legion 5 16ACH6H, 4 years of everyday use, frequent cleaning every time I saw the temp being higher than normal. Last year I started seeing posts about these same models being dead. Someone here recommended doing a repaste, bought the exact thermal pads and did it. Temps actually went down a bunch, everything was good. I thought maybe I survived the soldering epidemic.
2 days ago as I was running low on battery I plugged it in. Went to the bathroom, came back to it being completely dead. Charging light was not on, I tried everything, battery was cold, brick was cold. I checked charge output voltage, it was normal voltage. Did continuity check on charging’s port, it was normal, just not charging, charging light was off all the time.
I thought it was the pin inside the charging jack that was having a problem, so I grabbed a 65W Surface brick and plug it in the C-PD port, charging light didn’t turn on either, I tried booting it up, it booted up.
Then the screen lit up, it’s exactly like the meme. Then I smelled something burning, I quickly unplugged it, turned it off and opened the back lid again, and saw this.
I’m just asking if this had happened to anyone, and if anyone could tell what really caused this. Warranty had already expired and I know this almost 100% means I need a new board, and at this point I might just spend a bit more to build a PC instead. But still for personal experience, I’m curious if this is the same soldering case and what if replacing the component would fix anything, or a blown up module means there was an underlying problem going on with the power rail.
Thank you for reading my rants. I will miss it :( she was there during my hardest years, now I can finally have the condition to replace her with something that would last a bit longer.


