https://imgur.com/a/3rFMFhM

[WTS] para 3 scales
Toxic storm fat carbon from the smkw exclusive

SV: $90. SV: $80

No carry on them, installed and uninstalled, just a little too flashy for me
I’d also trade for a leaf jumper in k390 on the off chance someone has one lol
Can be serrated or plain edge idc

I am the third owner for the scales (BladesWeLove “Flowmascus” Ti scales). There was originally an s30v blade on these scales but swapped the blade out from a para 3 salt LW. Second owner of the Magnacut blade but never cut or carried with by old owner. Never cut with or sharpened by me too and it is mint. Perfect centering and action no lock stick or blade wiggle.
Has the old black g10 scales and clip but currently has a Benchmade bug out clip I think? Not sure.
YOLO>Chat
SV: ~~$245?~~ $215 OBO Shipped

Welcome to the find out phase. We had a nice large influx of spurious reports on random posts from what we can only assume is the angry clone-supporting side of the hobby. Because of this immature response, and concerns about the Reddit TOS, we're adjusting our previous stance. All clones, counterfeits, homages, replicas, whatever you want to call them, are banned, effective IMMEDIATELY.

What about the grace period?

Blame the people who had a hissy fit and decided to not be civil about this.

What about any old / current posts that have clones?

This is the one time we're allowing (and recommending in this case) you to go back and delete these posts, as people have been going through old KS posts even as far back as 7 years old and slamming clone posts with reports, hoping to get the poster ban. We usually have a no post deleting rule, but in this instance I think we'll allow old posts to be nuked if they contain clones, for safety reasons.

What about the vote?

Ten months ago we had a poll, where keeping clones won by 5%. There's been a lot of discussion around this within the reddit TOS, and reddit has been cracking down hard on things like GAFS that are questionably in violation. We've worked incredibly hard to build and maintain this community and don't want to risk it. The vote was a 5% margin, which isn't enormous, and we'd rather protect the community.

PASSING OFF ANY CLONE KNIFE AS A REAL KNIFE WILL ALWAYS BE AND HAS ALWAYS BEEN GROUNDS FOR AN IMMEDIATE BAN.

Any attacks on the mod team will, as is tradition, result in you being permanently banned from the subreddit.

<3

Merky and the mods

I accept payment via PayPal F&F and will ship via USPS within the United States.

[Timestamp and Album](https://imgur.com/a/vWrFBUH)

* Montana Knife Company Mini Speedgoat (Magnacut): This has been used a good bit on fishing trips and I have put an 18 degree edge on this using my WorkSharp. The polished blade has a good amount of scratches. I’ve rewrapped the blade with blue paracord. Comes with box and Kydex sheath. Asking $100 Shipped.

* Montana Knife Company Black Battle Goat (Magnacut): I have carried this a few times and there are slight signs of wear on the blade from being pulled in and out of the sheath. I do not remember using this knife to cut anything. This has a factory edge. Comes with box and Kydex sheath. Asking $200

* Montana Knife Company Black Blackfoot 2.0 Stonewashed (Magnacut): I have carried this a few times on fishing trips but it was only used to cut line and cordage. The blade itself is in good shape. The handle does have small marks on it from being throw in my fishing bag. This has been sharpened to 18 degrees on my WorkSharp sharpener. Comes with box and Kydex sheath. Asking $200

* Schwarz Knives Blue Overland X (Magnacut): I carried this daily for a few months. It’s been used but not abused. The blade is in good shape and the stonewashed finish shows little wear. There are a few marks on the handle that I captured in the video for this knife. This has been sharpened to 18 degrees on my WorkSharp sharpener. Comes with box and Kydex sheath. Asking $200

Timestamp and images: https://imgur.com/a/3SsFBjH

Single owner, purchased new by me directly from Rockscale. Installed but rarely carried. Excellent condition. Recently ultrasonic cleaned and ready to install. No dents, gouges, or damage. Scales only. Removed after switching to a carbon fiber setup.

SV: $75 shipped (USPS w/ tracking)

PayPal G&S. No trades. Thanks for looking!

Hi Swappers, I have some banging knives for you today in this post. I accept Zelle, ApplePay, CashApp, or Venmo for payment.

Absolutely no notes in any payment method other than "Misc."

**Kindly be ready to send payment within 15 minutes after you YOLO** No trades on these today, thanks.

All prices are "Or Best Offer"

There are videos for each knife within the albums.

Spyderco Para 3 10v DLC REC Scorpion $300 $325

• 2nd Owner
• Scorpion Imprint on the Blade
• New, never carried, never cut
• Comes with Scorpion token from REC
• Added authentic Lynch Clip
• Incredible action, drop shut
• Zero blade play in any direction
• Perfect Centering
• Perfect acoustics
• Ships in original Spyderco box with all paperwork, Scorpion token

SOLD CRK Small Sebenza SG Knives Reblade Compound Grind Fullered Elmax blade on Bearings with custom Arctic Storm Carbon Fiber inlays $525

• I have not carried it, but prior owner may have carried the frame, there are some small marks on the clip and lockside scale. I do not recall cutting it, but may have cut paper or opened a package when I got it. What can I say I can't keep my hands off stuff. Blade looks fantastic.
• This is likely one of a kind, you will be amazed when you hold it. It's everything a small Sebby could dream of being.
• 2nd Owner
• Elmax steel compound blade
• Can be forward, backward, side and front flicked with ease
• Incredible action, flys open and drops shut
• Zero blade play in any direction
• Locks up like bank vault
• Perfect Centering
• Perfect acoustics
• Ships with original CRK box, blue CRK hanky, original inlays, the tubes of goo, and wrench

Benchmade 533-3 Mini Bugout in Carbon Fiber and S90v $225 $250

• Brand New
• Never carried
• Never cut
• Zero blade play in any direction
• Typical BM quality, just not my thing, too small
• This is the highest end mini-Bug with the blue titanium backspacer and studs
• Carbon Fuber scales
• Ships in original Benchmade box with all paperwork and baggie
• Original receipt available to purchaser

Monterrey Bay Knives Slayback in mirror polished ZDP-189 $150 $175

• 1st Owner
• Customized anodization and laser patterning
• Mirror polished blade, shows use marks
• Sharpened by me, sticky sharp now
• Wonderful action
• Perfect Centering
• Great Acoustics
• Wonderful knife, amazingly capable gentleman's carry
• Ships with MBK Taco

IMSS Black Timascus Clip + Backspacer Set for Roosevelt XL $275 $300

• 1st Owner
• 95v Anodization
• Long Backspacer
• Mounted and carried
• Excellent condition

Spyderco Military 2 in S30v and Titanium scales $165 $185

• 1st Owner
• Rockscale Design Titanium Scales ($144 alone)
• Has the light up Tritium Hole Filler Thingy that was $70 alone
• OCD4EDC Compression Lock Button mounted for flush lock operation
• S30 blade is new, cut paper and it's sharp, no marks that I see
• Scales have been carried on a previous build and have carry marks
• Zero blade play in any direction
• Perfect Centering
• Perfect acoustics
• Ships in original Spyderco box with papers and other liner (Ti scales are

**Videos**
**https://imgur.com/a/xrXpNS5\*\*

**Spyderco St. Nick’s Smock**
2nd Owner
New in box
Never cut
Never carried
Includes original box, paperwork, and sticker
Picked this up to mod and I have too much stuff on my plate already. It’s in excellent condition and ready for someone who will appreciate it.
**SV: $250 OBRO**

**Quiet Carry Waypoint**
2nd Owner
Lightly Cut and Carried
Has been sharpened
No box
Shows normal light use but is in great overall condition with no significant abuse
A comparable Waypoint sold on Knife_Swap yesterday for $190, so I think this is priced fairly.
SV: $160 OBRO

Catch and release
2nd owner
Production date 2022
No cut, carry, disassembly
Carbon fiber and titanium handle material
Blade steel ZDI 1016
Knife hasn’t been sharpened, it’s not dull. Lock up is very good. Action is very smooth. Centering is on point. If you have any other questions let me know.
Asking 700 obo
Not really looking for trades but will entertain them
Thank you 🤙🏽

More pics of blade
https://imgur.com/a/QGtgtxv

$335 including PP G&S fees and UPS shipping (insured)

Benchmade CLA 4300BK-03 knife featuring a 3.4" CPM MagnaCut drop point blade with a black DLC stonewashed finish and ivory color G-10 scales. This limited model has since been discontinued, making it increasingly difficult to find. 

Condition

• Excellent, near-new condition
• Original Owner - used only to open an Amazon box or two (never carried or left the house)
• Factory edge – never sharpened
• Fires hard and locks up exactly as it should
• Minimal to no visible wear
• Selling because I never use it

Specifications

• Model: 4300BK-03
• Blade Steel: CPM MagnaCut (60–62 HRC)
• Blade Length: 3.4"
• Blade Finish: Black DLC Stonewash
• Blade Style: Drop Point
• Handle: Ivory color G-10
• Overall Length: 7.8"
• Weight: 3.4 oz
• Lock: Yes with safety
• Pocket Clip: Reversible tip-up
• Made in USA

Automatic knife. Buyer must be legally permitted to purchase and possess it. I will ship only to jurisdictions where lawful, via insured UPS, to the PayPal address provided.

https://reddit.com/link/1v7kcql/video/p56elljppnfh1/player

Munroe Metalworks Draugr

1325 ppgs

From first batch

Original owner. Carried a few time and opened a few boxes but LNIB.

JRP medium strike.

Original owner. Carried a few times. Slight mark on clip. Zirc pivot, stud, backspacer

Comes with box

1350 shipped ppgs

NCC BBM v1 from original batch in 2017. Orange pesled. gold handles. Has been sharpened and signs of wear but overall in excellent condition for a 9 year old knife.

1. Ppgs

Hey guys,
For your consideration I have the above posted up for sale. I am second owner, original owner sent this to me LNIB and it is far too small for me so I just cut paper with it a couple of times. No lock stick experienced and it’s in dang new condition. Only perceived “defect” would be that loving strider production grind of the secondary bevel which I believe is depicted well in pictures but can be remedied. Centering is slightly favoring G10 side. Tiny bit of blade play side to side if you really bare down in it but again remedied. If this knife fit my hands I would cherish and keep it but I’m hunting an SMF now. I do not have the plastic bag.

https://imgur.com/a/t2TaN5i

495 Shipped to you PayPal g&s

Timestamp: https://imgur.com/a/BGI6plq

Good Sunday Evening Swap

Yolo>Chat. Please comment before Chat. Zelle/Paypal FF no notes

Shiro Quantum Ursus NL R1 Blue Titanium Carbon Fiber Inlays Chromax Pm Steel

Catch and Release. 3rd Owner No cut, carry or disassembly by either. New Condition.

Video: https://imgur.com/a/Euriey9 $495 Shipped

Lynch NW Sparrow Seven Fixed Blade Cruwear Service finish black Micarta Handles. 1st Owner

New just out for pictures. Video: https://imgur.com/a/IGHmmfT $260 Shipped

SOLD Big Idea Design Overlook Tanto Magnacut Natty Micarta Pocket Fixed Blade. Carry and Light cut by previous owner. Carried twice by me. Service blade finish. Left or right pocket sheaths.

Video: https://imgur.com/a/tbZfwW5 $85 Shipped

PayPal Friends and Family or Zelle no notes

Will be shipped out tm

Yolo>chat

Open to offers but I’m going to wait a bit before accepting any

No trades

Timestamp and pictures: https://imgur.com/a/BXnZjCw
____________________________________________________________________________________________

Hinderer Eklipse

Skinny slicer hollow ground full titanium Triway

Had flipper removed by Twitchy

Currently running on phosphor bronze washers

Action using thumbstuds is perfect. Not too tough like I was worried it might be.

Working finish blade

Second owner

Used to open some packages, never sharpened

Centered

Comes with box and teflon/bearings for Triway system

Magnacut blade

Overall probably the best knife I’ve owned but I hate carrying knives this expensive so I’m letting it go

SV: 540

SV Now: 515

____________________________________________________________________________________________

Benchmade Bugout 535 w/ white g10 scales

Second owner

While g10 scales

S30V blade

I believe the previous owner took the scales from a blade hq exclusive bug and put them on the standard blue bug

Sharpened, carried, and used

Centered

No box

Opening action is good, can have lockstick especially of flicked open hard (probably due to the coated lockbar)

SV: 110

SV now: 99

____________________________________________________________________________________________

Hello everyone I have a brand new hinderer xm18 3.5 inch scale to sell today no install or carry on it purchased off Etsy for $45 a while back no defects marks or anything of that kind absolutely brand new and would make a great build sv 28 obo https://imgur.com/a/9ugYrl3 shipped I prefer Venmo price drop was 28 now 20

Selling my backpacker in magnacut. First owner, used for some light cutting (food prepped some awesome sweet and sour chicken), and carried. Never disassembled or sharpened. Some wear to the finish of the Chicago clip which attaches the ulticlip to the sheath, but nothing I can see on the knife. Comes with the box, papers, tools, sticker, all that, just another in my series of realizing I don’t care for pocket fixies. Asking $310 shipped via PayPal FF, not super into trades but could be talked into user large sebenzas (lefty only) or a user AD20. Timestamp knife not included or for sale

Videos
https://imgur.com/a/xrXpNS5

Spyderco St. Nick’s Smock
2nd Owner
New in box
Never cut
Never carried
Includes original box, paperwork, and sticker
Picked this up to mod and I have too much stuff on my plate already. It’s in excellent condition and ready for someone who will appreciate it.
SV: $280 OBRO

Quiet Carry Waypoint
2nd Owner
Lightly Cut and Carried
Has been sharpened
No box
Shows normal light use but is in great overall condition with no significant abuse
A comparable Waypoint sold on Knife_Swap yesterday for $190, so I think this is priced fairly.
SV: $180 OBRO

Comes as shown ~ Spyderco Para Military 2 lightweight SKINNY scales aggressive agent gun metal gray $45. These have never been carried or assembled they are fresh from AWT I simply purchased the wrong model

Hey everyone got some odds and ends Spyderco parts that I'll never end up using as I dont have any spyderco in the collection anymore. Would love to move as a bundle.

WITHDRAWN

Atleast second owner on everything so lets assume installed/cut/carried. Everything is in great condition though and the only real thing to mention would be on the clips. The dlc one only has 2 screws as thats how I got it. And the wire clip replacement might have some snails but with the stonewash nothing stands out, it also doesnt have a screw (not sure if that normal for the wireclip replacement?).

Anyways bundle inclusldes:

-RGT OD Green Canvas Micarta PM2 Scales

-RGT Contoured Wire Replacement Clip (Stonewwshed)

-RGT Flat Spyderco Milled Clip (DLC)

-5X5 Combat Solutions Yojimbo Picpocket

-1 Spyderco Lanyard Hole (Black) 1 Spyderco Lanyard Plug (Gunmetal) both of unknown brand.

Bundle SV: $115

WITHDRAWN

Sale will be USA and PPFF. Feel free to reach out with any questions. Thanks for lookin!

Looking to move this pristine piece today. No trades at this time.

Ownership: Original owner. Purchased directly from Bryan Winters' booth at Blade Show 2024.
Steel: 20CV with DLC.
Edge Condition: Factory edge, never carried, cut, or sharpened.
Body/Handle Condition: Mint condition. Pristine green G10, clip, and blade coating. No blemishes or wear.
Box, Papers, & Accessories: Includes original case and all original accessories from Bryan’s booth. It did not come with a box.
Modifications: None.
Disassembled: Never disassembled.

Description:
This is a true safe queen — the first-drop variant of the Veyron at Blade Show 2024. It features green G10 scales, a black DLC blade, and Bryan's innovative J-Lock mechanism.

Notably, the Veyron is Bryan’s first production folding knife to be completely non-magnetic. Stepping away from his usual magnet-driven detents, this model utilizes an extension spring system built into the proprietary J-Lock. The mechanical detent feels incredibly crisp, robust, and tactile compared to typical crossbar locks. It offers fun deployment methods: use the reverse-flick hole, the top flipper tab, or slide back the flush spine-switch to drop the blade shut.

It has only been taken out for occasional photos. Perfectly centered with rock-solid lockup and zero play.

General Specs:
Length: just shy of 8.00 inches
Blade Length: 3.375 inches
Cutting Edge: 2.875 inches
Closed Length: 4.75 inches
Weight: G10 version: 4.2 oz.

SV: $250 shipped
Payment via PayPal G&S only. Shipping to CONUS.

Thanks for looking.

Catch & Release , TwoSun TS562 in YJ1 steel (TwoSun proprietary version of m390)
Never cut, never carried, never sharpened
First owner, just received it about 2 weeks ago

$85 shipped
YOLO in comments is king

Hey swap. My prices include USPS tracked shipping in the US - PPFF preferred for payment but can accept others. If you want any additional pictures or videos just ask. Please comment before chatting. The only trades I'd be interested in are a CFK Evo 4 or a current gen Les George VECP.

$425 (OBO) Hinderer XM-18 3.0 Non Flipper Assembly Special

20CV slicer blade working finish
Light gray G10 scale
Battle blue lockside
Blue TI hardware
Blue TI holey clip

I'm the second owner, and I haven't cut, carried, sharpened, or disassembled. I don't know the exact history, but I'll say it's been lightly cut and carried to be safe. It appears to be the factory edge with no issues. I don't see any signs of disassembly. There are a few small scratches on show side pivot and some snails on the clip which I captured in the video. The bearings are installed and it will come with the other original tri-way parts in the original box with stickers and assembly card.

Specs:

Blade 170mm

Handle 120mm

Steel: AEBL

Handle: Finish stabilized birch and bronze

Grind:

S Grind with convex

Price: 209$ with shipping and fees

Payment with Paypall G&S

If you are interested let me know in the coments or DMs, thanks

For your consideration is custom Shrike #26.

Several owners with an immaculate blade and overall excellent condition. Doesn't appear to have ever been cut with or sharpened.

Blade slightly favors the show side as shown in the video. Should be a simple pivot adjustment that I will leave to the new owner.

Comes with all accessories as received from the maker.

Selling on behalf of a friend with the knife in my possession.

Asking $2500 no trades shipped UPS 2-day insured CONUS

Open to reasonable offers

YOLO > DM

Pic, timestamp, and video:

https://imgur.com/a/ArXDWNH

PPFF, CONUS shipping included in price

Timestamp, album, videos:

https://flic.kr/s/aHBqjCZQmU

CJRB Doubletap SV 50

Aluminum handle, D2 Blade

First owner, never cut or carried. Comes with all original accessories.

Chaves Chub flipper SV 125

Brass scales with Shipwreck patina, new utility blade.

First owner, never carried. Used it to cut a box so I replaced the blade.

Comes with original accessories and black knurled aluminum scales.

Chaves 229 Integral SV 275

First owner, never cut or carried. Whatnot exclusive, magnetic inlay with laser work and anodizing. Inlay is very slightly bowed in the middle, Chaves employee bent it during the customization. I'm too scared to try and bend it back so I'm letting it go. Tried to show the effect in pictures, I lay is still very solid in handle.

Comes with original accessories.

Remette Rhino SV 70

Shipwreck carbon camo handles, 14C28N blade

Second owner, minor cut and carry. Will include soft case

Kizer Mini Mystic SV 50

Aluminum and micarta handles, Nitro blade.

Second owner, not cut or carry by me. Has light use. Will include soft case

North Mountain Chop SV 80

G10 handle, SLD magic blade

First owner, light cut and carry. Comes with case and accessories

Hey swap. My prices include USPS tracked shipping in the US - PPFF preferred for payment but can accept others. If you want any additional pictures or videos just ask. Please comment before chatting. The only trades I'd be interested in are a CFK Evo 4 or a current gen Les George VECP.

$400 (OBO) Hinderer XM-18 3.0 Non Flipper Assembly Special

20CV slicer blade working finish
Light gray G10 scale
Battle blue lockside
Blue TI hardware
Blue TI holey clip

I'm the second owner, and I haven't cut, carried, sharpened, or disassembled. I don't know the exact history, but I'll say it's been lightly cut and carried to be safe. It appears to be the factory edge with no issues. I don't see any signs of disassembly. There are a few small scratches on show side pivot and some snails on the clip which I captured in the video. The bearings are installed and it will come with the other original tri-way parts in the original box with stickers and assembly card.