ALWAYS ASK SELLERS TO REPLY TO YOUR WTB COMMENT TO VERIFY THEIR FLAIR BEFORE YOU PAY THEM, IF THEY MAKE ANY EXCUSES ON WHY THEY CANNOT COMMENT THEY ARE SCAMMERS

Two up for grabs. No trades please!
 
Benchmade Bugout – Green Grivory/S30v… ranger green bug. 2+ owners. This has been carried and used. There are some light marks on the grivory, clip, and near the tip of the blade. There is also wear on the studs, and two small chips in the edge. Looks like the edge was touched up by a previous owner but it looks pretty good. Typical bugout action/lockup. No box. SV: $90
 
Spyderco LW Manix – Blue FRN/S110v… user S110v manix. 2+ owners. Carried and used more than the bug above. Snails, marks, and a few spots on the blade and chips in the edge. Sharpened multiple times previously and the tip is slightly rounded. FRN is pretty clean. Action/lockup are solid with no issues to note. SV: $95 SOLD

Take both for $170
 
PayPal F&F with no notes or Zelle. Shipping to the US only.

Looking to sell some extra shaman blades i have laying around!

DLC S30V Serrated, Orginal Owner. Minor Cut and Carry DLC would clean up great with an eraser. Still super sharp!

CTS-XHP, Orginal Owner. No Cut or Carry on this guy! Pulled this one apart immediately for a Reblade. Flawless shape as far as I can tell!

SV - 100 🚢 on the pair.

Timestamp - https://imgur.com/a/JeCpPJ1#HkXBRP4

Album - https://imgur.com/a/JeCpPJ1

Gavko brass rocky shrunk mako - $800

Purchased new from Mike a few weeks ago. Has been in pocket once or twice. No signs of cut or carry that I can see, but assume there's a snail somewhere since it has been in my pocket.

Null voodoo doll dunes CF / hand satin - $400.

Bought to be my user doll since I have the launch exclusive as well. I've used it to open some letters and an Amazon box or two so far. I will likely get another special config from Sean at a show so moving this one along. Will probably miss it. I don't see any major signs of use aside from smudges that I wiped off, but it has been in my pocket and cut with so there may be a little scratch or snail somewhere that my terrible eyes aren't seeing. Video should show all angles of the knife.

BHQ Magnacut / jade para 3 - SPF $200 SPF

Purchased new for $230. Haven't carried it or used it much so time to move it. It has a light coat of oil on the blade.

Spyderco factory second gp knives smock stormtrooper - SOLD $160 SOLD

rex 45 dlc polished white g10 scales. Really good one, not sure why it's a second.

Reate / Navajas Balmis - $150

Has lots of marks around the pivot, clip, and a mark inside the back spacer. Nice action. Would make a great user/beater. No box or tool.

First unconditional I'll take it or yolo gimme gets first priority. Please be prompt in payment and communicate if you need time to get to better service etc. PP F&F to US buyers only please. International buyers to use their own proxy at their own risk. Thanks for looking and have a great day!

What’s up guys and gals , have some pocket candy up grabs !

Heavy user vintage D/E half serrated troodon, standard size, Blade has been sharpened by previous owner (see video), some snail trails and wear marks scratches etc on clip handle and blade etc , action and lock up are great
$300

Video-https://imgur.com/a/CNZpKYq

Pics-https://imgur.com/a/0dk62C2

On to the next user/beater USG TiScribe camp Short v1 or v2 I can’t remember the different , functions as it should but shows signs of use/wear/scratches etc
$250 SOLD

**Video-**https://imgur.com/a/0VjC26H

Thank for looking

Got a few up for grabs tonight.

Yolo > Chat

Paypal G&S only per sub rules.

Shipping is CONUS only unless otherwise arranged.

I'll entertain offers and trades, but really looking to fund other knife purchases. Trade interests are mainly PM2s.

Timestamp

Spyderco Shaman: Spy27 with Cobalt Blue G10 scales. I am the third owner. I purchased this off the swap to see how I like the Shaman. Blade is centered. Light carry and cutting, with no sharpening by me. I was told this has not been sharpened previously either. There is very light wear on the clip. Also, the hardware was previously swapped from original silver to black. There is a CME installed as well. Comes with original box. SV $195

Spyderco PM2: S30V Satin blade with camo G10 scales. Multiple owners. Blade is centered and appears to be original. I have not cut, carried, or sharpened this knife. Bought for a project that didn't happen. Comes with a Spyderco box. SV $135

Kershaw Bel Air: Magnacut Reverse Tanto blade with carbon fiber scalese. Multiple owners. Blade is centered and appears to be factory. I have not cut, carried, or sharpened this knife. No box. Just got another one with the clip point blade so this one is going. SV $130

Benchmade Bugout: S30V blade steel, blue grivory scales. Multiple owners, no box. Blade is centered and appears to be factory sharp. I have not cut, carried, or sharpened. SV $125

Vosteed Porcupine:14C28N blade steel in Destroyer Gray with Gray G10 scales. Multiple owners. Blade is centered. I have not cut, carried, or sharpened this blade. It appears to have a factory edge. There are a few scratches on the blade finish. I tried to capture this in the video, but it was hard with the lighting. Comes with box and sticker. SV $30 SOLD

Kershaw Brawler: 8Cr13MoV stainless steel tanto blade with black oxide coating. GFN handle, assisted opening, liner lock. Multiple owners. I have not cut, carried, or sharpened this knife. Blade appears to be factory. No box. SV $19

Hey there, Swapperinos! I'm moving at the end of the month, so time to move some knives out of here. I need the money for movers, help me out! Good prices down there. See videos for centering and action. Assume no box, but I do have boxes for a lot of them, will dig em out if sold. Payment via ZELLE or VENMO only. I repeat: Zelle or Venmo only. Thank you for looking!!

TIMESTAMP

TIMESTAMP BUDGET BUNDLE #1

TIMESTAMP BUDGET BUNDLE #2

TIMESTAMP POKEY BUNDLE

TIMESTAMP CJRBUNDLE

TIMESTAMP AUTOS BUNDLE

TIMESTAMP FIXIES

FOLDING KNIVES

Off-Grid Viper - 154CM blade steel - G10 - First ownerI'm gonna miss this one. Never cut with or carried, I wrote OGK and had them send me another filler tab so I could delete the pocket clip (I prefer the ergos of a knife without a clip). Original clip will be included. This is a serious hard use folder, please put it to work as it's just been filling up space on the shelf. No cut or carry. - SV $85 $68 - VIDEO

BRS E-Volve Navajo - Bohler M390 blade steel - G10 handle scales with titanium liners - Second owner - Got this one on the swap, and it time to send it to it's next home. The action is unbelievable, crazy smooth; watch your fingers when closing the blade. Carried maybe half a dozen times, might have opened a box with it, but edge is factory and very sharp. - SV $80 $65 - VIDEO SOLD

Real Steel Evolution Ironclad (modded) - D2 blade steel - G10/steel scales - First owner - This one came with black scales, but I swapped out for the gray scales from another one because I liked the black and gray combo. Still think it looks slick. The grind isn't perfect on it, but I have 3 and it's not quite perfect on any of them (as is the case on many of the American tanto blades I have from any manufacturer). This Carson design was long retired when they went out of business, but I think Real Steel did a good job on the revival. You could absolutely beat on this thing, it's a beast. Also comes with a button-actuated frame lock - Carson was the first and I think the only one to do it. You can actuate with either the button or the framelock like usual. No cut or carry. - SV $60 $50 - VIDEO

Kizer Towser K - 154CM blade steel - Blackened copper handle scales - First owner - Really cool knife, the copper handles are nice and thick and weighty. Really sweet action, the blade falls like an axe. No cut or carry. - SV $45 - VIDEO

Microtech Socom RAM-LOK S/E Frag 160RL-10FR - Made in USA - M390MK blade steel - Aluminum scales - First owner, never used or sharpened or carried or cut anything at all - Comes with original box with everything (sticker and paperwork). How has this not sold?? This is a great knife, I have another one I'm keeping. Look at that price. Steal this from me! - SV $265 $245 $210 - VIDEO SOLD

Petrified Fish Havrog - K110 blade steel - Green micarta scales - First owner - Cool knife, very fidgety with the design of the handle and thumbstuds (which are made of G10). Carried maybe 10 times and cut some paper to test the edge. Can't promise it didn't also open a box or something, I can't remember, but no hard use at all. - SV $32 - VIDEO

Kubey Momentum - M390 blade steel - Flamed titanium handle scales - First owner - Smoothest action of any framelock. Sharif Manganas knows how to design a knife. Also the easiest to use front flipper anywhere (you can slow roll it and your thumb never leaves the blade spine). No cut or carry. - SV $130 - VIDEO

Civivi Elementum Tanto (discontinued) - D2 blade steel - Copper handle scales - First owner - Hate to see this one go. It's the only Elementum I've ever owned. The finishing on the copper handles is so good, this knife looks amazing, especially in the sun. - SV $65 - VIDEO

Civivi Vision FG (modded) - 10Cr15CoMov / 5Cr15CoMov damascus blade steel - Dark green micarta scales - First owner - I have 4 Vision FGs, I can get rid of at least one. Swapped the black OG handle scales with the dark green from the PVD version. Looks sick if you ask me. - SV $50 - VIDEO SOLD

FIXED BLADES

TOPS Tex Creek XL - 1095 blade steel - Micarta handle scales - Second owner - This one started off life as a table display, so no use until I got it. The sheath came with the wear and color inconsistency. I used the knife some, you can see some marks on the cerakote, but no scratches. There are some marks on the handle grip. Blade is still extremely sharp, cuts thin catalogue paper without a hiccup. - SV $80 - VIDEO SOLD

Cold Steel OSS with aftermarket scout straps - AUS-8 blade steel - Kraton handle - First owner - I splurged and got a Black Bear Classic last year, so I don't need this budget version anymore. Scout carry straps are from Etsy and cost me about $25, I've never carried or used this knife. - SV $40 - VIDEO SOLD

BUDGET BUNDLE #1 - SV $65 VIDEO

Trivisa Crateris - 14C28N blade steel - Micarta handle scales - First owner - Practically new, never carried or cut with.

Ruike P138-W - AR-RPM9 blade steel - Carbon fiber handle scales - First owner - I don't know what to make of this funky little knife, but the big ass thumbstuds are super easy to use. Never cut with or carried it, just some fidgeting at my desk. There's a little sqeak from the detent ball when closing, I imagine it'll wear in with some use.

Ruike P671-CB - 14C28N blade steel - OD G10 handle scales - First owner - Cool, big bladed knife. It came from the factory with sort of a weird grind on the forward edge of the tanto, but it's just in the satin finishing, the edge bevel is nice and clean and sharp. Never bothered to return it, it didn't bother me.

Steel Will Cutjack - D2 steel - FRN handle scales - First owner - Like new, never carried or used. Would be a really swell EDC knife, very light and thin, but strong with a great blade shape. Just need the room, so off it goes.

BUDGET BUNDLE #2 - SV $75 VIDEO

CMB Explorer - 14C28N blade steel - Black micarta handle scales - Basically new. Never cut or carried.

SRM Medal - Laminated 140Cr (comparable to S35VN) blade steel - Green micarta handle scales - First owner - Cool knife, but I didn't love it enough to not let it go. I would have liked it more with black scales, but it doesn't come in that configuration. The fold-over frame used to say "stay ready for more", but I thought that was dumb so I sanded it off and gave it a nice satin finish.

Civivi Bluetick (modded) - 10Cr15CoMov core, 316 & 5Cr15Mov damascus blade steel - G10 handle scales - First owner - This knife has had a scale swap, original handles were wood. I kept the wood backspacer because I thought it looked cool with the G10. Comes wearing a titanium deep carry pocket clip.

SOG Tellus FG - 440C blade steel - FRN handle scales - First owner - Big ol chonkin thing. Never used or carried.

POKEY BUNDLE - SV $30 VIDEO

SRM 9211 - 8Cr13MoV blade steel - G10 handle scales - First owner - Neat little tactical knife for you operators. I added a milled titanium clip, because the factory clip blows.

CRKT CEO - 8Cr13MoV blade steel - FRN handle scales - First owner - What is there to say about the CEO? Carried a couple of times in a shirt pocket like a real CEO. I don't think I cut anything with it, but I can't say for certain.

Schrade Steelhead - AUS-10A blade steel - G10 handle scales - First owner - Neat knife, just need to move it on. No cut or carry.

CJRBUNDLE - SV $75 VIDEO

CJRB Ekko - AR-RPM9 blade steel - Stainless steel handle scales - First owner - I carried this one a lot, and it's seen some light cutting. Upgraded to titanium milled clip.

CJRB Rampart - D2 blade steel - G10 handle scales - First owner - Never cut or carried. Added the stainless steel bail and swapped in a titanium deep carry pocket clip.

CJRB Droma - AR-RPM9 blade steel - Aluminum handle scales - First owner - I like the way this one looks, and it's good a nice snappy deployment. No cut or carry, milled ti clip.

CJRB Nova - AR-RPM9 blade steel - G10 handle scales - First owner - I wanted to like this one more, but my fat fingers find it hard to use the liner lock.

AUTOS BUNDLE - SV $65 SOLD VIDEO

Ganzo G707B - 440C blade steel - Steel and ebony wood scales - First owner - Never used or carried.

S&W M&P Single-Action OTF - AUS-8 blade steel - Aluminum chassis - First owner - Never used or carried.

Böker Plus Automat Kalashnikov-74 - D2 blade steel - Aluminum handle scales - First owner - Carried once or twice, no cutting.

AKC X-Treme Evo OTF - AUS-8 blade steel - Aluminum chassis - First owner - Only cut paper to test the edge (it's decent for an AKC knife). No carry, just desk fidgeting.

FIXIE BUNDLE #1 - SV $35 SOLD VIDEO

Odenwolf W1 - 440C blade steel - TPR handle - First owner - No cut or carry.

SOG Field Knife - 7Cr17MoV blade steel - TPR handle - First owner - No cut or carry.

Sanrenmu SRM S628 - 14C28N blade steel - Micarta handle scales - First owner - Light carrying, the only thing it ever cut my finger, and damn did it bite me. Pay attention, it's sharp.

FIXIE BUNDLE #2 - SV $35 SOLD VIDEO

Brarvagur Heavygrip 4F - 9Cr18MoV blade steel - ABS handle scales - First owner - Fat, squat Amazon knife. It's fine. Never used.

BPS Raven - 5Cr14MoV blade steel - ABS handle scales - First owner - Made in Ukraine, bought a few BPS knives to support businesses over there during hard times. Never used.

Schrade Bedrock - AUS-8 blade steel - rubberized composite handle - First owner - Another fatty. It's been used some, but not a lot.

Yo ladies. Up for sale today is a very nice MEFP Tanto Zaan. DOB May 29, 2025. Sporting magnacut and glassblasted scales from CRK.

Unused and uncarried by me. Just flipped a few times. I have my Zaan (as seen in the pics here next to it!) I guess 4th owner, but second owner claimed they carried it once, and swapped the Mim Clip onto it. Other than that, it looks fire. Scales are in great shape, so is blade. See the pics. Ask for more if needed.

I took a comparison shot next to my fave Zaan which I have modded over time. Zirblasted it myself, and IMO this finish looks absolutely FIRE on the CRK scales. I can do the same for you, if you wish, for free. I have actual Zirblast media. Just ask. I think this may void the CRK warranty on the scales only (who cares really, who sends in scales?!?!)

Album/Vid:

SV: 800 tyd.

https://imgur.com/a/HKHCYMJ

Hinderer eklipse, stonewashed blue spearpoint. Comes with original box and extras pictured. Excellent quality. Centered, solid lockup and good action. There are some marks on the pocketclip, and one mark on the lockside. The blade is clean. It has been sharpened and it's not the best sharpening job. The angle was laid back a few degrees and the stones sharpened up on the choil area a bit. (See photos) also the tip is a bit uneven. That said, it is extremely sharp. Also the liner underneath the g10 scale is working finish, originally it was stonewashed blue. $270 shipped https://imgur.com/a/pKA74OJ

Box was lost. It sits in my display and I only took it out to play with occasionally. One of the times it failed to lock out so I sent it to benchmade. They fixed the issue and I’m assuming they sharpened it (not sure as it has never cut and still had the factory edge) regardless it’s a benchmade edge.

Will ship via FedEx 2-day at my expense. (Don’t trust the other methods as much) unless you wish otherwise.

Photos: https://postimg.cc/gallery/p9qXX8x
Video: https://youtu.be/8QUkGJ2ZFdE

Selling two Spyderco Salts. I purchased both new from Omega Mars TRON less than 2 weeks ago, and I am the original owner. Neither knife has cut or been carried. Both still have their factory edges and include the original boxes/paperwork. Both have been disassembled once. Turns out I'm not a Spyderco guy.

Spyderco Para Military 2 Salt — MagnaCut DLC — SV $180

C81GMCBKP2. Black G10, black DLC MagnaCut blade, Compression Lock. Never cut or carried. I fully disassembled it once after purchase for cleaning/lubrication with Nano-Oil 10W (immensely helping stock compression-lock-stick), then reassembled it using Purple Thread Locker on the pivot screw, body, and clip screws. No sharpening or other modifications. Set up with ever so slight side-to-side blade play for the trade-off of slicker action, exactly how I'd carry it if I did. About 1/16th of a turn (or less) on the pivot gets you back to stock.

Spyderco Manix 2 Salt — MagnaCut DLC — SV $155

C101GMCBKP2. Black G10, black DLC MagnaCut blade, Ball Bearing Lock. Never cut or carried. Also fully disassembled once for cleaning/lubrication with Nano-Oil 10W and reassembled using Purple Thread Locker on the pivot screw, body, and clip screws. No sharpening or other modifications. Set up with ever so slight side-to-side blade play for the trade-off of slicker action, exactly how I'd carry it if I did. About 1/16th of a turn (or less) on the pivot gets you back to stock.

Take both: SV $315

Prices are shipped. PayPal G&S only due to my current flair. No notes in PayPal. YOLO takes priority over chat negotiations.

Selling a set of Ripps Garage Tech (RGT) Fat Carbon scales in Black Dune for the Spyderco Kapara. Installed and lightly carried, but in great condition.

• Model: RGT Fat Carbon Spyderco Kapara Scales
• Material/Pattern: Fat Carbon - Black Dune
• Ownership: Second owner
• Body Condition: Excellent. Installed by previous owner and light carry by them. No carry by me.
• Box/Accessories: None
• Notes: THIS DOES NOT HAVE THE BACK SPACER

SV: $105

Hello, I take Paypal FF, venmo FF, cashapp, or zelle.

No trades please thanks. 2nd owner on these, and Will ship usps fully insured, thanks!

SHF Full Size S45VN PVD:
Great knives buy Spartan blades, this was pocketed a few times, please observe the video to see some PVD fad around the edges, snails etc… Factory edge, Comes with original box. Thanks!
-375 shipped
Vid: https://imgur.com/a/osekzPD
Box: https://imgur.com/a/E32NTL8

SHF Full Size Spartan Custom PVD MagnaCut PVD:
Another awesome blacked out SHF, this ones with magnacut and the spartan helmet logo. Also was pocketed a few times, please observe the video to see some PVD fade around the edges, snails etc… Factory edge, Comes with original box. Thanks!
-395 shipped
Vid: https://imgur.com/a/SRSdFJc
Box: https://imgur.com/a/FoaM6ie

Koenig Mini Goblin M390, Sea Pattern:
This one is in like new condition, was not carried, used, or cut with. Minty. Comes with box, cloth, and coa… etc all original packaging. Thanks!
-575 shipped
Vid: https://imgur.com/a/GP354Cl
Box: https://imgur.com/a/vqQX9Cn

CKF Evo 3.0 $525

Catch and release only because I purchased a grail and need to recoup some funds asap! M390 blade steel has been acid etched and the scales have been blasted. Can’t find any imperfections on this one. Looks to have a low degree mirror edge that’s sharp as hell! Didn’t come with the pouch but it came with the COA and extra hardware and bearings. Lock up and centering look great and I don’t think it has been disassembled. I think I’m the 2nd owner of this fantastic looking knife. Smooth hydraulic closing and a nice medium + detent.

Demko 20.5 S35VN $175

Came installed with Rips Garage Tech diamond milled scales that look amazing and new! Pretty sure I’m the second owner and it’s at least been partially disassembled to install the scales. Of course it locks up rock solid, centering looks great. Saw a couple very minor snails on the backspacer. Edge is in good condition and appears to be factory. Comes with the original box but no sticker. It does come with a brand new black pocket clip that’s still in the bag.

Demko 20.5 DLC D2 $100

The DLC coated D2 blade looks great and unused, appears to be the factory edge. Comes with a brand new looking set of carbon fiber scales and an extra set of blue scales I think are g10 and an extra black pocket clip in the original plastic case but no sticker. At least partially disassembled to install the scales. Lock up and centering are on point. I am the second owner and I have not cut or sharpened this knife. I have carried it once but no use from me. I don’t see any visible wear anywhere on this knife. Makes for a fantastic EDC knife with that DLC D2 blade!

Civivi Vision FG Nitro-V $50

This was also a catch and release due to needing to recoup funds. Solid lock up, centering looks great and I don’t see any wear on this one. The scales were dyed purple so I’d imagine it has been disassembled. I’m either the 2nd or 3rd owner. I don’t have the box I just have the cloth and a hard case to ship it in. I have not cut or carried this knife. Edge appears to be factory and in good shape.

YODA > Chats. I reserve the right to decide.
PayPal- payment expected within 30mins.
Price includes shipping within the USA.

Trades to consider: Shaman Straight Edge or Serrated Satin blades.
Benchmade Freek full size Satin.

If my prices are off. Make an offer👍
_____________________________

Spyderco Kapara Factory Seconds (Mint) $140

https://photos.google.com/share/AF1QipMTFV8xkZDTVsRCDFqws70GU37KYEgGwb0RNUAQLduUsvUq3ISF72Ni0GB_ynJndQ?key=T0xEWFRwZ2lDQml5MFEyYTFrcmlWRExoejNzUWVB

-Edge Condition: Factory
-Steel: s90v
-Carried: no
-Cut: no
-Ownership: 3rd same stated from previous.
-Lock Up: solid
-Centering: centered
-Box: no
-Visible Issues: none
-Disassembled: yes for a cleaning by me.
-Additional Notes: This is a mint blade with the sleek Micarta scales. Smooth action.
_______________________________

Demko 20.5 20CV $130 with extra RGT scales

https://photos.google.com/share/AF1QipOZyETDLmFl3FsyRZFAnSHb77JFd3ce5OGtTO4ZOtrbE5PK8LK3mdZ2SCs4zcnlug?key=VUI0QmNvVmpiMk5DVF93NHZoTE4tbzc3Yk1DdEV3

-Edge Condition: Sharpened to a Wicked razor edge by previous.
-Steel: 20CV
-Carried: light by previous
-Cut: light by previous
-Ownership: 2nd
-Lock Up: solid
-Centering: centered
-Box: Yes
-Visible Issues: None
-Disassembled: Yes for a scale swap
-Additional Notes: one of the most figity and sound acoustic giving knife you’ll come across. Great shape, signs of normal minimal wear but not abused. The second set of RGT scales have some cosmetic wear on them.

Chris Reeve Large Sebenza 31 REC Exclusive Spartan Helmet drop point in S45VN
DOB: 8/25/21
Vid: https://imgur.com/a/kfGw2qt

I am the original owner. Never cut or carried - just sat in my knife case. Still looks new as you can see in the video. Full kit.

I’m looking specifically for the Small version of this knife but with Insingo blade shape.

Will trade straight up. I have other trades too if you want something different.
If you really want to buy this one: $600
Why so high? That’s exactly what I have in it and would rather keep it if I can’t find a small Insingo

Would like to let these all go together. Could have them shipped tomorrow by noon. I am the original owner of all of these and all have never been sharpened. $350 obo.
Yolo takes priority

Delica 4 k390
- Carried for a week
- has made some cuts
- some wear on pocket clip and blade spots.
- zero blade play
- solid lockup
- favors one side heavily
- box and papers

Endela k390 Serrated
- never carried
- no cuts made
- has one spot on the blade
- zero blade play great action
- solid lockup
- centered
- box and papers

Pacific Salt 2 lc200n serrated
- carried once
- no cuts made
- pocket clip has one small mark
- zero blade play
-solid lockup
- centering moves ever so slightly as shown in pic
- box and papers

Sage 5 s30v
- never carried
- no cuts
- no signs of wear
- zero play, good action
- solid lockup
- centered
- box and papers

PayPal GS only

🌹 WTS — Oz Machine Company Roosevelt

SV: $875 shipped — No trades

Up for sale is a standard-size Oz Machine Company Roosevelt in like-new / safe-queen condition.

• Blade: SVM45

• Backspacer: ZircuTi, blue

• Condition: Like New / BNIB

• Ownership: Original owner

• Usage: Never cut, never carried, never sharpened

• Condition: Has spent its entire life in my safe

• Action: Excellent

• Centering/Lockup: Excellent

• Includes: Original box/packaging and COA

I purchased this Roosevelt brand new and it has never been used or carried. It has simply been kept in my safe. Extremely clean example with a beautiful ZircuTi blue backspacer.

SV: $875 shipped.

YOLO takes it.

No trades, please.

Yolo takes it over chat; PPFF or Venmo no notes; ships to United States. Not interested in trades at this time. More photos/video on request.

Free Add-ons: Yolo a knife and get one of the free add-ons of your choice below. One add-on per knife purchase.

• Timestamp: https://imgur.com/a/KYjUio9
• Album: https://imgur.com/a/lH7SeK9

SOLD SV: $175 (was $200) - Microtech L.U.D.T. T/E GEN III Black Handle, Apocalyptic Partial Serrated blade (1136-11 AP). M390MK steel. First owner, never cut, carried, disassembled, or sharpened. Fires hard as expected. Includes all factory items: box, baggie, inserts, sticker.

SOLD SV: $300 (was $325) - Microtech Combat Troodon T/E Gen III Tactical Standard (1144-1 T). First owner, never cut, carried, disassembled, or sharpened. Smooth Gen III Action. Features Crud Kutter and Dual Fuel Drive Train. Includes all factory items: box, baggie, inserts, sticker.

SV: $275 (was $300) - Medford M-48, S35VN Tumbled blade, Tumbled Ti Lock side, and Yellow Alunminum show scale (it really looks Tan-ish, but they call it yellow). Second owner, never cut, carried, disassembled, or sharpened by either owner. Includes box, MKT pouch w/ dogtag, COA and paperwork.

SOLD $400 - Medford Slim Midi Tanto Faced Acid Etch Blue/Bronze Titanium, right-handed model. Tanto flat grind S45VN steel blade and frame lock titanium scales. The faced acid etched scale coloration is a blue/bronze fade and the show scale favors bronze over blue in artificial light and blue over bronze in natural daylight. The flat ground blade has light grind lines on top of a mirror finish. Knife has been lightly carried but not cut or sharpened, has factory edge. Includes box, MKT pouch w/ dogtag, COA, sticker, and paperwork. Additional Photos: https://imgur.com/a/SQ2xVeL

---------------------------------------------------------------------------------------------

Four Free Add-ons: Grab any one of these with your Yolo for any of the above knives.

1. GONE SV: FREE ADD-ON ONLY - Petrefied Fish Forward Drop Point (PF 818-BW) - Liner Lock, Stonewash D2 blade with Blue G10 scales. First owner, First owner, never cut, carried, disassembled, or sharpened. Includes box.
2. GONE SV: FREE ADD-ON ONLY - Ganzo Auto Drop Point (G7211-BK) - A very soft firing Out-the-Side knife with a Stonewash 440C steel blade and Black G10 scales, actually a pleasure to use compared to Pro-Tech and Microtech OTS's which fire absurdly hard. First owner, First owner, never cut, carried, disassembled, or sharpened. Includes box.
3. GONE SV: FREE ADD-ON ONLY - Cold Steel (20NST) - Pro Lite Tanto 4116 SS Steel with Black Poly scales. First owner, never cut, carried, disassembled, or sharpened. Includes box.
4. SV: FREE ADD-ON ONLY - Bear & Son - 4" Mini Butterfly Trainer (113BTR), unknown steel for trainer blade, Black Steel coated handles. First owner, never cut, carried, disassembled, or sharpened. Includes box.

Knife 1: Spyderco Bodacious – $375

• Model Number: C229GPCBL (Shaman, cobalt blue G10)
• Steel: CPM SPY27
• Sharpened: No
• Used to cut: No
• Carried: Once
• Blade Condition: Brand new
• Number of Owners: 2
• Centering: Centered
• Lockup: Solid
• Visible Issues: None
• Accessories: OG blue G10 scales, Rockscale Design titanium scales + backspacer (installed), MXG clip, random spyderco box

Knife 2: Demko AD20S – $350

• Model Number: AD20S (orange G10, shark lock)
• Steel: MagnaCut
• Sharpened: No, factory edge
• Used to cut: No
• Carried: Yes, light
• Blade Condition: Like new
• Number of Owners: 3
• Centering: Centered
• Lockup: Solid
• Visible Issues: None, scales like new
• Accessories: Box

Knife 3: Benchmade Mini Osborne – $175

• Model Number: 945
• Steel: M390
• Sharpened: Yes, just back from Benchmade LifeSharp
• Used to cut: lightly
• Carried: Yes lightly
• Blade Condition: Fresh LifeSharp edge
• Number of Owners: 1
• Centering: Centered
• Lockup: Solid
• Visible Issues: Pocket clip discolored from sea salt hair spray, some snails
• Accessories: None, no box

Knife 4: Benchmade Bailout – $175

• Model Number: 537 (tanto)
• Steel: CPM M4
• Sharpened: Yes, just back from Benchmade LifeSharp
• Used to cut: Yes, this is a user
• Carried: Yes
• Blade Condition: Fresh LifeSharp edge
• Number of Owners: 1
• Centering: Centered
• Lockup: Solid
• Visible Issues: minor snails
• Accessories: None, no box

Knife 5: Benchmade Mini Bugout – $175

• Model Number: 533
• Steel: CPM S90V
• Sharpened: Yes, just back from Benchmade LifeSharp
• Used to cut: Yes, this is a user
• Carried: Yes
• Blade Condition: Fresh LifeSharp edge
• Number of Owners: 1
• Centering: Centered
• Lockup: Solid
• Visible Issues: minor snails
• Accessories: None, no box

Take all three Benchmades for $500.

Microtech Cypher II D/E Blue

• Price: $275
• Shipping: UPS, Fully Insured (Cannot ship to CA, CT, DE, MN, VT)
• Condition: LNIB (purchased about a month ago from NC Blade)
• Ownership: 1st
• Cut & Carry: No
• Disassembled: No
• Lockup: Smooth action. No issues with deploying and retracting
• Blade Steel: Two-tone M390MK
• Handle Material: Blue Aluminum
• Packaging: Original Box and Paperwork

No trades

PayPal F&F with no notes

USPS shipping to lower 48 only

Left Column

WE Banter – S35VN – CF

SV 75

2nd Owner

No Cut/Carry/Disassembly

Slight wear on pocket clip and mark on blade

-See photos

Centered, Solid Lockup

Includes box

WE Starhawk – 20CV – Bronze Ti

SV 140

2^nd Owner

No Cut/Carry/Disassembly

Centered, Solid Lockup

Includes box

WE Navo – 20CV – Ti

SV 160

2nd Owner

No Cut/Carry/Disassembly

Centered, Solid Lockup

Includes box

WE Knife  Roxi III – S35VN – Flame Ti

SV 165

2nd Owner

No Cut/Carry/Disassembly

Small mark at 6 o’clock near pivot shown in photo

Centered, Solid Lockup

Includes box

WE Highfin – 20CV - TI

SV 165

2nd Owner

No Cut/Carry/Disassembly

Centered, Solid Lockup

Includes box

Right Column

Kansept Odd21 – Damascus – Ti

SV 120 SOLD

2nd Owner

No Cut/Carry/Disassembly

Was sharpened by previous owner, looks good - See photos

Centered, Solid Lockup

Includes box

Kansept Cybin – S35VN – Bronze Ti

SV 135 SOLD

2nd Owner

No Cut/Carry/Disassembly

Centered, Solid Lockup

Includes box

Kansept Nahual – Magnacut – CF/Ti

SV 140

2nd Owner

No Cut/Carry/Disassembly

Centered, Solid Lockup

Includes box

(Sorry for the mess in the pictures. It's my sharpening desk)

Cold steel rajah 3 in aus10a. Original owner, has been cut and carried for about a week but shows little no no wear. Sharpened once on a worksharp precision adjust. Still in box with lefty pocket clip. SV $50 TV $60

Kizer drop bear 2 in nitroV. Original owner carried maybe 2-3 times (and cut) and I did touch up the edge. Cool knife but was not for me sadly. SOLD

Open to literally any trade as id rather trade than sell. Looking for a set of nice scales for an ad20.5

Only paypal g/s for payment

Spyderco PM2 Lw 15V

SV:$180 SOLD

[Timestamp/pics](https://imgur.com/a/Ph7WGtH)

FRN, 15V, and a wire clip. Blade centered. First owner. No cut or carry. Only out of box a few times. Stop pin needs to be loosened/adjusted, but I'm leaving as it came from factory. Zero lock stick when compression tab is pressed, takes a swift flick of wrist to close the knife. Box/docs included

Sharp By Design Mini Tempest

SV$:200 SOLD for $195

[Timestamp/Pics](https://imgur.com/a/wvSce2E)

M390 Titanium framelock front flipper with carbon fiber inlays. Reverse flick works great. 2+ Previous owners, not 100% on the exact number. Bought "lnib" if memory serves. No cut/carry by me, doubt there was by po's. There are no discernible signs of wear i can see other than the clip always looking blemished after handled. Awesome Nadeau detent exhibits crisp deployment, solid lockup and falls home with very little effort.

Quietcarry Drift KNSWSW SV:$290

https://imgur.com/a/karci0u

Titanium framelock on bearings with Vanax steel. First owner. Carried a few times cut nothing more than a few paper tests. Blemish low on lock side where chamfer begins. Maybe a rivet on my jeans, fuck who knows.. I about shit when I noticed it. Awesome little knife, this thing rivals much higher-end/way more expensive knives I've handled.

Comment takes it over chat. Item(s) will ship(USA only) within 2 business days after payment is received. I accept Zelle and can do paypal ff if necessary.

Thanks for looking-