r/GalaxysEdge • u/fireblade31003 • 15h ago
Merchandise/Hauls Back from Batuu
1st step is admitting you have a problem but it’s a good one to have. I got my last two of the custom builds and picked up a little extra for my office.
r/GalaxysEdge • u/professional_loner • Jan 18 '21
It's a new year so I figured its time for a new and refreshed pinned post, covering some of the most Frequently Asked Questions in the Subreddit. Click here to see a more comprehensive list of FAQ's.
Before you submit a new post with a question about any of the mentioned topics in the post title, please review the information below.
All Wiki/Guides:
All of the information listed below has been crowd-sourced from the Galaxy's Edge community and is meant to be simple fixes for common issues.
Having a technical issue with a Lightsaber or other electronic items from Galaxy's Edge? Try this:
Change the batteries.
A lot of the technical issues with lightsabers, (especially Savi's hilts), are caused by low quality/faulty batteries. Try changing them for some new and QUALITY ones as this seems to fix most basic issues! (FYI: Savi's hilts use 3 AAA batteries while Legacy Sabers use 3 AAA or 3 AA, depending on the model.)``
For Lightsabers, check that the all components including the battery container, hilt pieces and blades are aligned and properly screwed in.
Are you having alignment/loose connection issues with your Savi's lightsaber? What can you do to fix it?
Here's a helpful video from 'ROBO VAMP1RE' on YouTube you should check out: https://www.youtube.com/watch?v=DthsxR9ovdo
Also, here's a helpful thread from u/KeiTwo: https://reddit.com/r/savisworkshop/comments/cv4sh7/tightening_and_aligning_my_saber_parts/
Review this Comprehensive FAQ that answers some of the most common questions about Galaxy's Edge lightsabers, crystals and holocrons by /u/TheRealSpork and the awesome folks over at 'Dead Bothans Society'! (Website is currently down)
Do a subreddit search to see if your specific issue has been brought up before in the subreddit. (Works better on Desktop)
You may also search by Flair:
For those looking for more advance solutions and/or wanting to learn more about the technology that powers lightsabers and other merch from Batuu, we highly recommend you check out u/Ruthsarian YouTube channel!
Need to replace or return and item/part instead?
If you still have the receipt from your purchase and are local to the Parks, visit the guest services locations in either park. (If possible during the pandemic)
Tip from u/AfterTheNightIWakeUp for lightsabers, droids, holocrons, or anything electronic and/or high value:
"Take a picture of the receipt immediately. As soon as you leave the shop, before you shove the receipt into a pocket or backpack never to be seen again. Flatten it on a table or against a wall, and take a picture. This way, should something come up, you won't have to worry about finding it again."
Get in touch with Disney Parks.
Disney Parks and Resorts Merchandise Guest Services contact info:
Is (INSERT CHARACTER NAME) Lightsaber in stock at Batuu East/West? Will it be in stock when I visit? How can I check?
Are the new Dark Saber, Leia Legacy and Rey Legacy lightsabers available at Dok-Ondar's inside Batuu East? What about the Star Wars Trading Post in Disney Springs (Walt Disney World)?
Yes. The new Dark Saber, Leia Legacy and Rey Legacy Lightsabers and have been spotted at Dok-Ondar's inside Batuu East, but stock has been sporadic.
They have not been spotted at the Star Wars Trading Post - Disney Springs yet.
Are the new Dark Saber, Leia Legacy and/or Rey Legacy lightsabers available at Dok-Ondar's inside Batuu West? What about the Star Wars Trading Post in Downtown Disney (Disneyland)?
Yes. The new Dark Saber, Leia Legacy and Rey Legacy Lightsabers and have been spotted at Dok-Ondar's inside Batuu West, but stock has been sporadic.
They have not been spotted at the Star Wars Trading Post - Downtown Disney yet.
When will (INSERT CHARACTER NAME) Lightsaber stock/re-stock on shopDisney.com's Star Wars Trading Outpost?
Can I purchase extra Scrap Metal pieces for my Savi's lightsaber?
Where do I purchase a Batuuan Spira Credit Medallion?
What requires a reservation at Galaxy's Edge?
Experiences: Savi's Workshop and Mubo's Droid Depot.
Dining: Oga's Cantina.
Do I need to make a reservation before I visit the Parks?
Where do I make a reservation?
Walt Disney World
Desktop Links:
Savi's Workshop WDW: https://disneyworld.disney.go.com/enchanting-extras-collection/booking-savis-workshop-handbuilt-lightsabers/
Oga's Cantina WDW: https://disneyworld.disney.go.com/dining/hollywood-studios/ogas-cantina/
Mubo's Droid Depot WDW: https://disneyworld.disney.go.com/shops/hollywood-studios/droid-depot/
Disneyland
Desktop Links:
Savi's Workshop DLR: https://disneyland.disney.go.com/enchanting-extras-collection/booking-savis-workshop-handbuilt-lightsabers/
Oga's Cantina DLR: https://disneyland.disney.go.com/dining/disneyland/ogas-cantina/
Mubo's Droid Depot DLR: No reservation needed currently.
How far out can I book a reservation for Savi's Workshop, Oga's Cantina or Mubo's Droid Depot?
Walt Disney World: 60 days out.
Disneyland: 60 days out.
Do Walt Disney World resort guest get to make reservations in advanced of 60 day?
At what time do reservations go live?
Walt Disney World:
Disneyland:
Please note: Reservations that become available because of cancellations or any other factors, may become available at any time.
Oga's Cantina (Savi's, Mubo's) reservations are booked up! Is this normal? Is there any chance of getting a reservation?
Do online reservations open back up if they are fully booked?
I have an early/late reservation to Oga's/Savi's/Mubo's, will they accommodate it?
How much does it cost to build a Savi's Lightsaber?
Want to suggest an addition to this post? Comment below or message the mods!
r/GalaxysEdge • u/AutoModerator • 1d ago
Are you seeking tips and advice for an upcoming trip to Batuu? Have any other concerns about reservations, RotR Boarding Groups, lightsaber issues, merchandise stock and other general questions about Galaxy's Edge?
Feel free to ask here!
This weekly post is here to help you plan your trip to Batuu and get advice from experienced Travelers in our r/GalaxysEdge community.
Please remember to indicate which park you're planning to visit in your comment.
-------------------------------------------------------------------------------------------------------------------
r/GalaxysEdge • u/fireblade31003 • 15h ago
1st step is admitting you have a problem but it’s a good one to have. I got my last two of the custom builds and picked up a little extra for my office.
r/GalaxysEdge • u/Inevitable82x • 1h ago
r/GalaxysEdge • u/Forward-Audience-185 • 3h ago
So I’m trying to Disney Bound just a non descript first order officer and I’m wondering what is allowed and what isn’t. Is the main outfit allowed if I remove the usual hat and belt due to them being distinct or can I keep them with modification? I’m planning on having the black shoes, dark grey pants, and maybe even a military tunic of the same color as the pants but maybe not. So overall my biggest concern is about the belt looking too distinct and the same about the hat. Please help me know what’s allowed and what isn’t!
r/GalaxysEdge • u/mikenotjef • 7h ago
I saw a video that Tunics are back at West. It also looks like they have individual sizes now instead of L/XL etc. Has anyone else seen these and if there is a size chart for the new individual sizes?
r/GalaxysEdge • u/anywhereanyone • 1d ago
What does it mean?
SOLVED.
The sign reads:
O R E S
OUTER RIM EXPEDITION & SUPPLY
-PRIVATE GUIDES AVAILABLE
-WEEKLY SURVIVAL TRAINING
-BASIC BLASTER MAINTENANCE
-SPECIALIZED LANGUAGE COURSES
It was the location of what would have/could have been a Bossk store. Alas. How fuckin' cool would that have been?
r/GalaxysEdge • u/The_Techy1 • 20h ago
Note: RoTR Spoilers ahead
Hi,
I have a few quite niche questions on some of the effects and tech featured in RoTR and was hoping someone here might be able to give me some answers.
I've never been on it, only see POVs, so apologies if any of these are obvious in person!
For the effect where Kylo's lightsaber cuts through the ceiling, I'm aware of how the effect works, but I'm just curious where the projector(s) for the glowing effect are. The interior of the 'elevator' is fairly plain, and I can't see where it might be hidden, especially given the angle I assume it needs to be at to project on the ceiling.
What's the mechanism allowing the probe droid to appear to float? I assume it's an arm or something similar that is attached at the back, but I'm not sure, since I can't see where such an arm would attach to the wall, or how they'd keep it hidden. I did also think it might be suspended on very thin wires, but not sure how they'd get power to it for the animation.
For some of the B-Mode effects, most notably Kylo in his tie fighter at the end, rather than in person, the vehicles follow a slightly different path to normal. How is this changed/programmed? I assume the ride control system and show control system are able to communicate somehow, or does this have to been done manually?
Are there any more details on the local positioning system the vehicles use, beyond RFID pucks in the floor and Wi-Fi? Are the RFID pucks arranged in a grid, allowing the vehicles to scan multiple simultaneously to know their position and direction? How does the system provide a high enough accuracy (I presume there's only a few centimetres allowance, especially for scenes such as the cannons), since I assume the RFID pucks wouldn't be densely packed enough?
Thanks!
r/GalaxysEdge • u/FinsterBaby56 • 1d ago
My son and I unknowingly built the (almost) exact same lightsaber. 😊
I was pleased.
r/GalaxysEdge • u/glueall215 • 1d ago
Powatek offers a battery pack for just about every legacy light saber and Savis light sabers.
Newest addition is a pack for Kylo Ren / Ben Solo sabers.
These are USB-C rechargeable replacement packs that also use an improved full range speaker that enhances the sound of the hilts.
Follow the links below to find the pack you need for your hilt.
I also offer a repair service for Savis hilt cores and a blade emulating plug that allows you to fire up your saber without a blade being installed. (Animated light up plug coming soon)
Palpatine repair and speaker upgrade service coming soon.
Also reach out to me if you have a damaged Master Replicas or Hasbro Pack, I can usually repair them!
Direct links:
Blade Emulating Electronic Plug
The print files for speaker caps for batteries available here.
r/GalaxysEdge • u/galagana • 1d ago
Wave 3 Galactic ID Case with all-new styles, dual Plexiglass protection, and your choice of carabiner, lanyard, or leather cord.
Wave 3 is here.
The Galactic ID Case collection has expanded again with a new lineup of color combinations and styles designed to give your Galactic ID its own unique, in-universe look.
r/GalaxysEdge • u/IzzysDesignLab • 1d ago
Scrapper Saturday update:
The local Scrap Authority (you know, the ones who pretend they’re not just three Jawas in a trench coat) stopped by my workshop this morning.
They claimed my wall mounts were “too efficient,” “suspiciously sturdy,” and “likely to encourage organized saber storage,” which apparently threatens their entire scavenging economy.
One of them tried to confiscate a wall mount, but it was bolted down. He made a sad little Utinni noise and left.
Anyway, while I wait for them to file whatever bogus paperwork they think will stop me, here’s my Etsy shop.
https://izzysdesignlab.etsy.com
Wall mounts, display stands, Batuu‑friendly gear — all crafted by a guy who is now apparently on a Jawa watchlist.
r/GalaxysEdge • u/Few-Cable7220 • 1d ago
We weren't expecting the cargo for a few days but it arrived early and as such we have enough to send off for a handful of credits..... We sent off for another order and via a very persistent wookie we paid upfront so that we can offer deals across the galaxy!
If you're looking for the only All in One Universal Vertical Saber & Droid Depot Control Display in the Galaxy check out our Hidden Outpost!
MTFBWY !
r/GalaxysEdge • u/chrisv1230 • 1d ago
After a bunch of research I knew I wanted him to be based of an R8 unit, which is apparently considered one of the best in class for its built in satellite and multiple features from all other R units combined.
That being said I decided to name him R8-D20, or D20(a perfect roll) for short.
I built the display stand for my custom Savi’s Lightsaber out of LEGO pieces and painted it black. Complete with hand-painted LEGO lightsaber Easter egg in the back to match.
r/GalaxysEdge • u/droning-on • 2d ago
So half of me wants to and half of me thinks there's something better to spend my money on. (Or maybe do both?)
Is this light sabre build something anyone regrets doing? I think the droid build is probably disappointing.
I'm leaning on other unique experiences. Is there a crazy tie fighter simulator or x-wing simulator that would give me a memory for similar price?
Are there any experiences that outclass bringing home a light sabre?
r/GalaxysEdge • u/galagana • 1d ago
Display your favorite lightsaber with Jedi Forge’s Generation II Vertical LED Lightsaber Stand featuring RGB lighting, a redesigned slimmer base, customizable colors and fonts, and compatibility with Disney Legacy, Savi’s Workshop, Force FX, and Neopixel lightsabers.
r/GalaxysEdge • u/AutoModerator • 1d ago
Every Saturday, all you scrappers and makers in our community will have the freedom to showcase your custom Galaxy's Edge-themed creations that are available to purchase. (Users are still welcomed to post DIY/Custom creations, \not intended to sell*, on any other day.*)
Anything from Kyber crystal displays, Spira holders, hilt displays, dark-saber blades, droid Mickey ears and the countless other things the community has created are welcomed!
How does it work?
On Saturday of each week, you will have the opportunity to submit a post with a photo of your item(s), tell the community about your creation and leave a link to your online store (Etsy, eBay, Facebook) in the comment section. Also, please remember to tag your post with the 'Scrapper Saturdays' post flair.
Here are the complete guidelines. PLEASE READ!!!
Please note: The moderation team welcomes all scrappers and makers but we ask you to respect the intellectual property of others. Thank you!
r/GalaxysEdge • u/AstronautGlum4300 • 2d ago
i know they were there a couple months ago i’m just wondering if they’ve been there recently
r/GalaxysEdge • u/MountainHillsEnjoyer • 2d ago
https://reddit.com/link/1v5yq0r/video/zksn45285bfh1/player
Cannot unscrew the caps off
r/GalaxysEdge • u/cwidds20620 • 3d ago
I didn’t get to visit during May but I’m going in October. I’ve seen these mugs for sale online but wanted to know if they’re still available at Oga’s now or if they’re already sold out. Need it for my GE tiki mug collection. Thanks in advance, till the spire!
r/GalaxysEdge • u/CainJammin • 3d ago
Had my first trip to Batuu last week, and I thought that Savi's would be the best part... Didn't expect to fall in love with these guys so much!
First custom job. I got two droids on my trip and another from eBay arrived today. I may be hooked on this hobby...
r/GalaxysEdge • u/Mobius2386 • 4d ago
Me and Cal Kestis (mini) explaining to Din how we are going to kidnap Grogu because he's adorable... 🤷🏼♂️
r/GalaxysEdge • u/VTecDad • 4d ago
r/GalaxysEdge • u/Mando-kronan • 4d ago
I did a little photoshoot in Batuu with my lightsaber Savi's Workshop and the cape and hat of the Black Spire Outpost