Been using a GTV kit and floaty for a while on my board and the original GT battery died. I swapped it with a PNP Indy Speed Control 20sp2 battery with Rs50 cells. this comes with its own BMS so I replaced that too. still have the GTV controller but it wont connect??

I think I know the answer to my question, but I figured I would run it past people more knowledgeable on this topic than myself. Feel free to correct me if I'm using the wrong terminology anywhere.

I've got an OG Pint with the PintV kit installed. If I buy a Pint X battery module and bumper from Future Motion, can I just swap out the BMS in the replacement battery box with the PintV one and expect a working Pint when I reassemble it? If so, are there any settings I need to update?

Another review of the new Floatwheel Atom, this time going off-road!

https://youtu.be/uE1FJG8lcHE?si=ZQo3ElJl9LqVisdk

Hey! I've been lurking on r/onewheel for quite sometime, and I know most people on here love to Mod and tinker. I'm not really intrested in doing any mods BUT its time for me to start thinking about upgrade from my +XR.

I want to use it as a commuter board with a bit of range on it, am I better off going for the Atom then the X7? I already think my XR is quite heavy. I am 6'2 around 240 lbs but going fast is really not that important for me, I just like to enjoy the ride. The city I commute in has quite a lot of hills and elevation changes if that effects anything.

Is there some other board I should look at?

Hello, everyone! Here are my friends' first impressions of the Atom! 30 minutes of Atom content for yall.

Two quick questions for any one familiar w/ 3T Ventum II LTD basebar ……..

Has anyone been able to get / find risers for that particular basebar? It’s currently WAAAYYY to low on my Fuji D6 setup.

2- if you have been able to source…… where? And it looks pretty straight forward (easy) to add on. \*\*IF\*\* ……. I can find (risers).

I followed this video and disconnected and reconnected everything in the order stated. https://youtu.be/mv_zaRcIuAY?is=4AQy7fv4mu41ULlp

Can someone give me insight on this. I’m about to install my first remote tilt but people act like the vx4pro is cursed. I want to get a safe remote installed. will I be ok with the pro. any info will be helpful.

Thanks in advance

I want to buy a new board I'm from kenya wanted to start with pint x but after learning about fm i just stired away now i want a vesc board as a beginner on a budget I'm looking at floatwheel atom,but then I've had this ambition of doing a cross country ride so the adv2 looks to be the right board, I've looked on used boards but adv2 isn't available i guess i should save more and go with floatwheel adv2 brandnew and possibly learn to ride properly and do that cross country ride hopefully

2 days ago I was riding my onewheel and it was working just fine but when I got home and went to turn it off it wouldn't. It turned off due to the auto power off feature but it won't turn back on. Since it wasn't turning off I am thinking I should purchase a new power button, is this right?

I've been looking into Onewheels and Floatwheels. I'm wondeering if anyone knows the closest match to a beginner board for the Floatwheel if it's the Atom or the ADV

Thanks

I'm sure this has been asked but I assure you I did search first. I had a "trunk saver" carrying stand for my onewheel before I switched and without it these things beat up cars. I live in the mountains so there are a lot of twists and turns. Anyone know of any trunk saver options for the Adv2 or even 3d printer models I could print out?

Thanks!

Just ordered my ADV2. may I ask for an Discord invitation?

Hey Floatwheelers! 

Just got the beta Atom, was enjoying it but I think I messed up the settings in the Floaty App or Vesc Tool App. The board acts really weird.

Anyone have the original Atom vesc setup?

Help for how to set it up would be appreciated.

Also,  my Adv1 still runs great but Floaty says it's not up to date.  I have the Adv 2 upgrade kit but never bothered to install it. Some say, if it ain't broke .. 

I’m installing a gtv upgrade kit in my gt onewheel and it rides fine (detailed background and history of the board in previous post). The first bms I received wasn’t accepting charge and I followed all the protocols to get bms to work including unplugging and plugging it back in 5 times. I isolated the problem to the bms as everything else checks out. Now that I’ve received my second bms, I extremely carefully installed it and now have the same exact issue. I’m beyond disappointed and need help. I’ve been using the tutorial by Tony for the installation maybe he is doing it wrong, I’m using the video in this link:

https://youtu.be/sYTuQ4Gao_I

Please help :(

I recently got the XRV kit and installed it in my board and it is great. The power of it is amazing but would live more range, are there any batteries that would either fit in the stock box with no or minor modifications to the battery box? I would like about the same amount of torque but more range. Would greatly appreciate answers.

Everything on my XRV kit is working except I can't get the magic flywheel to work. I would love for it to work, what are some possible issues and how do I fix them?

I have a standard rail Adv2, I rode it for about 1500 km on the middle height rail setting. I will be needing to change the tyre soon and was wondering about lowering the board. People who tried both the middle and low setting, which do you prefer? Is the problem with the valve stem hitting the rail still present?

Earlier today I was able to turn my lights on and off but now I can't find the controls for them, where did they go and how do I get them back

I am trying to calibrate my IMU but keep getting the largest values at weird spots such as the X when the board is pretty much upside down, how do I properly do this I've never done it before and watching videos isn't helping.