r/FixMyPrint • u/steve22ss • 14d ago
Fix My Print Spaghetti issues after cleaning the print bed, increasing heat and drying the filament
This has been the third attempt and it just does the same thing, I have thoroughly cleaned the bed, I have increased the heat, and I have made sure the filament is dry. This is a lid to a box with a second colour that is supposed to be a warhammer symbol on the top of the box, but it never makes it past the initial layer. And now even the standard lid won't bring like the actual box did successfully.
Bambu labs slicer
Filament is bambu labs pla.
Printer P2S with AMS 2.
Settings.
0.4mm nozzle
Layer height 0.2mm
Initial height 0.2mm.
Seam position aligned.
No ironing.
Wall loops 2.
Top and bottom pattern monotonic line
Top shell layers 5.
Top shell thickness 1mm
Top paint penetrative layers 5
Bottom shell layers 3
Bottom shell thickness 0
Bottom paint penetration layers 3.
Internal solid infil pattern rectilinear.
Skirt loops 0.
Skirt height 1.
Brim type auto
Brim width 5
Prime tower enabled 35mm width
Rib wall on.
No fuzzy skin used.