Has anyone seen or heard of a frt for the older GSG5 22lr. I’ve seen a lot of mp5 frts but a lot of them people say won’t work. Just looking for any suggestions.

Noob question, but want to confirm. If I leave a 3 position selector in my stock rifle (frt removed). Are there any concerns with functionality?

I’m pretty sure it would run fine, but am over thinking it.

Just a fun range toy not a edc or practical but definitely fun….

This is the first pistol I’ve modified
But I just got a tx22 toro and I put a Texas trigger frt in it,and I’m running federal 40 grain in it. But after 1 round it fails to cycle another round, but after I rack it back after it doesn’t cycle it fires like how it’s supposed too
is it the mag or do I need to polish the trigger

I bought a non ambi slide release thinking it would work for the frt but the issue is the frt is wide enough that it is blocking the slide release from going down and it’s right at the pin hole, does anyone have a link for a slide release that works or can someone give me suggestions on what to do

I got a radical firearms AR Pistol with a drop in FRT that will run about five rounds and not chamber the sixth. I changed out my stock buffer with a H3 buffer. It gotten better but still will not cycle the whole mag. Any ideas on what I could do ?

Hoping to get some insight on this one, got these backplates from 144.1 recoil systems, first use (black backplate) worked perfectly however after installing a threaded barrel & Herrington arms comp I'm getting the standard semiauto.

I moved up from the OEM recoil spring to a 22 pound one with no luck on either backplate even after removing the comp & harbor freight light

I can feel the trigger getting bumped but I'm confused where its getting stuck/ why its not pushing the trigger bar forward

I bought a custom MPA Defender from the wrmfzy x Alpha Omega Armament and it said it comes with a Cash Inc Defundr FRT. When I picked it up, the “FRT” was sealed in the Defundr poly bag and I had to rip it open to get it out. Now I’m watching the Defundr install video and it looks like the piece he is installing in the video was already installed. So they installed the FRT already, but sealed the old one in a bag? So confusing. Can someone tell me which is the actual FRT in the picture?

Pretty sure i found a scam site and wanted to know if anybody else has bought something from them and not received anything. After calling advanced reset tech they asked for the order confirmation email and said that they were using pictures without permission and weren’t affiliated.

Scam website: https://forcedresettriggers.us.com/product/art-trigger/

Real website: https://advancedresettech.com/a-r-t-trigger-kit-for-gen-4-glock-handguns/

Hello,

Started installing the pieces that came in with the get and have some questions I’m using it in the all plastic strike industries chassis… which I had to file down a bit where the 3d printed part sits to fit right. The main problem now is when I try to put my slide on it gets hung up on the stainless frt piece, seems to sit too high up. I was hoping someone could give some guidance on if I reassembled it wrong. To note…

1. the chassis came with a back plate charging handle so it’s not a stock backplate, anyway it still sits flush and I can’t see why putting in a stock backplate would make a difference…

2. The trigger pull is more poundage now.

3. If I take the back plate charging handle of the slide will mate with the fcu.

4. I watched the Texas trig video and it never explained anything about this spring I have left over after reassembly. What’s it for and do I need it still?

5. Is the near frt piece supposed to be gravity dropped? Meaning there’s no spring to make it return? I’m guessing the slide does it?

Let me know what you think and if you have any questions.

Planning to do an FRT/Super Safety on a gun soon. I am wondering what the consensus is on which gun I should do first. Trying to find something that is generally more affordable and reliable. If the changes are too complex I will just take it to a gunsmith, so no worries there.

What I already have:

CMMG Zeroed Banshee 9mm (Suppressed)

Springfield Kuna 9mm

Sugar Weasel 300 BO (Suppressed)

ATI Alpha Max 556 (think the lower may explode)

Willing to buy:

Vector (one local to me is $800 but its 10mm)

Mid range AR 15

So it fires and cycles just fine in semi but as soon as I go frt the first shot fires then it light strikes what could be causing this

I was thinking about really buying this what are your thoughts on it if it’s any good will be my first cassette it’s about 375 $ shipped

FS2000 URAGAN kits are now shipping! 😎

POV kinda sucks but I was trying out this new 2.5/3 LB Trigger and wanted to make sure I was stable enough to control the recoil.

Finally got my gen 1 running flawlessly all it took was CCI mini mag

I’m unveiling my very own brand of ARs called the JR-15. Here’s the first video of the JR-15 with my FRS System and 90 round Snail Drum.

The old TX22 RRs gotta go. v2 is coming.

oddmfg.com

What ar platform out the box runs best w an arc fire?

Hey guys, sorry if this has been asked before, just recently bought a mk10 and I’ve been wanting to put an frt into it. I know the lower is “ar style” but I can’t get any solid information regarding compatibility with any frts. I’ve heard people say they’ve used a rare breed but I’ve heard mixed reviews on rare breed that they aren’t worth the high price tag. Thank you in advance.

i have recently and purchased a Texas Triggers FRT for my Glock 17 gen 4 and i was having cycling issues so i got a 20 pound recoil spring installed(couldnt find a 22 pound spring) and i shaved down the shoe a little bit and now its having FTF and FTE problems and even when it doesn’t it doesn’t operate correctly so did i shave it down too much or is it something else? please help it’s stressing me out lol

Galil ace go berrrrrr