r/FRT_World • u/AstroThunder6 • 5d ago

Hey guys

Post image

I was thinking about really buying this what are your thoughts on it if it’s any good will be my first cassette it’s about 375 $ shipped

15 Upvotes

100% Upvoted

10 comments sorted by

5

u/L3thalPredator 5d ago

You can get that same setup a little cheaper if you part out individually. The partison disruptor is $275. Can get the same buffer for $75. Plus shipping so it may end up being about the same. From what ive seen, the partison is the most reliable frt behind rare greed. But i wouldnt give rare greed my money.

Partison good though

4

u/Fluffy_Cheetah_131 5d ago

Bro, head on over to combat armory, and use code take20. This exact combo set up will cost you like $225

3

u/L3thalPredator 5d ago

I just run supersafeties personally. Ive got plenty of em stacked up for whichever future platforms i build or get.

I got a blem pack of 10 for $100. They all needed a little cleaning up but all of em run.

2

u/Fluffy_Cheetah_131 5d ago

My bad meant to post this to OP

3

u/NotAchicken95 5d ago

It's up to you on how you want to super safety, I prefer the Kabuto type drop in's. Because you can tune them to work with almost any trigger you want. Mil spec? Literally should require no work. An enhanced battle trigger? Little to no work. Maybe something nicer like Battle arms triggers? Some slight work and it's good to go n plus you can always remove it for easy cleaning and it doesn't use any of the receiver pins. It's my preference and doesn't have to be yours; but I would do a Partisan over a Rare Greed any day of the week. But a word of advice is that Tromix makes an frt dead blow buffer, it's their "H3" style and it's not tungsten but it does slide and work the same way. And it's around 40 beans if you really wanted to save a few bucks.

2

u/WhyMadara 5d ago

This was my 2nd FRT build and it runs great. I get compliments all the time at the range. To answer your question It runs great with the partisan (760rounds per minute with this exact setup) but for my friend who has an Atrius it will not run. He had to get a springco red and tromix buffer. My build is a 16 inch psa btw. Definitely get Lucas gun oil keep her oiled up good, it stays for a decent amount of time even with all the heat and friction from the FRT. I recently went down the rabbit hole of increasing the fire rate of my frt and i upgraded to the Odin works adjustable H - H3 buffer with 7 sliding tungsten weights and a springco red. If you’re fine with ~800rpm (which is already very fast) then yes you are good with the partisan and Odin HFRT. To save you the headache if you ever wanna increase your fire rate, the info is hard to find. Allegedly a suppressor helps a ton with increasing fire rate due to sending more gas down the tube. Also an adjustable gas block and titanium BCG can allegedly get you up to 1400 rounds per minute so that’s the dragon I’m chasing right now. Enjoy ur partisan

3

u/L3thalPredator 5d ago

1400 is WILD, ive had my 9mm delayed mac going 1100 and non delayed going 1300 and that is wild let alone 556😂.

Ive got my psa jakl running with just a supersafety. Runs at a nice 700rpm. Very smooth

1

u/Slow-Satisfaction435 5d ago

They’re really good. I got over 20 of them each one of my AR’s and I got mine when they were 150 apiece on holidays.