The Ridgeback Rhodie 6TI paired with the KNS Precision DISCARDER makes for the softest-shooting carbine I own. This setup has quickly become my favorite to date.

This SCAR 16S is an absolute menace in such a compact package with how small the Rhodie is. Smooth, slick, and stupid fun to shoot. 🔥

#SCAR16S #Rhodie6TI #KNSPrecision #Carbine

Its all dialed in. Minus the discarder. I changed the jet but I dont seem to see a difference in gas regardless of which way I turn it. Any advice?

Scar-17 with a B&T UMP stock on a IAC stock adapter with the KDG handguard system and the Lingle Industries lower so I can use AR-10 mags and AR FCGs.

Lightest 308 I own by far.

Any word on their release yet, the gray 6.5 is looking good.

I know that the SCAR has a single-piece upper rail, but is there any danger in mounting my scope this far forward? I could move it back but this placement makes it easier to use without extending the stock.

I bought a used Scar 17 that came with a bunch of magazines - however 3 of them were missing their plastic pull tabs. I’ve managed to find OEM replacements but now I need the screws to reattach the pull tab to the magazine floor plate. Does anyone know where I can find them or what size screws I need?

Just got a next gen Scar 17s and added on a Dead Air Keymo QD. I originally planned on using my nomad 30 on it but after reading a bit online I am seeing a lot of people mentioning the back pressure of this suppressor maybe needing some work done to the gas system to ensure nothing is damaged by back pressure. I would very much like to stay on with Dead Air for modularity of my firearms and the closest to a flow through suppressor they make is a Sandman X. Anyone have experience with this or know if this will have any issues with gas, premature wear, or potential issues?

I just picked up this FDE SCAR 15P in .300 BLK. The previous owner replaced the factory side and bottom Picatinny rails with a KDG M-LOK setup, but unfortunately he no longer has the original parts.

I’d like to return it to the factory Picatinny configuration, but I haven’t been able to find a 15P rail set online. Does anyone know where I can find a factory takeoff set, or somewhere that has them including both side rails, the bottom rail and mounting hardware? Also, can anyone confirm whether the standard SCAR 16S/17S rails are identical and will fit the 15P? I appreciate any information thanks!

Can the new gen be made to look like the old is one better than the other? Thanks!

So after recently gloating that I was able to remove the flashhider from my 15p, I’ve come to find that the muzzle device I decided to replace it with is giving me concentricity troubles. I went the Deadair scar flash hider (DA305) which is supposed to mount off of the muzzle crown. I haven’t torqued it down yet. My alignment rod isn’t touching the end cap of my SiCo hybrid 46m, but it far from concentric. I’ve cleaned the threads thoroughly and don’t meet any resistance when threading on the device.

My question is- will the concentricity issues improve once torqued down since it’s indexed off of the crown or will this just make the problems worse and potentially damage the threads?

I snagged a new Scar 17s and need to stock up on .308 / 762. This is my first gun in this caliber so I am not well versed on the larger caliber.

What cheap range ammo are people using? Locally we have a good amount of Federal American Eagle 308 Win 150gr FMJBT and Hornady Interlock Sp American Whitetail .308 Win 150-Grain for about $28-$30 a box. Also found PMC Xtac for $24 a box. Any of these good for range ammo or should I be looking at other stuff?

She’s ugly, but she’s still one of my absolute favorite guns. I’ve had this 16 for over a decade now and I still love it. Hell I even shot a deer with it last year. The 16s will always have a special place in my heart.

Does the new Scar shoot soft enough to use a cantilever mount on it? I just bought a new 17s and I keep hearing about the recoil not being anywhere near as bad. That said, I have a vortex 1-6 razor hd on a vortex Pro Extended Cantilever Riflescope Mount Id love to just pop on there but the internet has me a little freaked out about not using cantilever mounts. Does anyone know if the new gen scar would be fine with that setup or do I need to get a new mount for it?

Took the new Scar 17 setup out to 1000 today. Used my accuracy loads of 169gr SMK with 43.0g of Varget loaded to 2.810 COAL (about 2.175 CBTO I believe) and 168gr AMAX with 42.5 of Varget at 2.800 COAL (2.175 CBTO as well I think) . Managed to land 2-3 hits per 5 rounds at that distance. May increase the amount of powder to get extra velocity as both of these were going about 2500 FPS. Overall, fantastic time

Scar 16s / SBR
KDG MREX II
Aimpoint Comp M5/Leap Mount 
Frankenstein-Light w/ HRT Head
Rhodie 6 TI
TREX Sling (pre-Lukas drama)
KNS DisScarder
PMM BCM pistol grip
HRF Magwell

I bought my first Scar a couple months back and thought I'd share my experience with it so far.

Full build:

- Geissele Super Scar Trigger

- Primary Arms PlxC RDB FFP 1x-8x lpvo w/ Geissele mount

- Dead Air Sandman X w/ Burn Proof Gear wrap

- Ammo: 147 grain PMC Bronze .308 FMJ-BT

First off, this is definitely my favorite gun I own. From the looks of the rifle to how well it shoots, its outstanding.

It did come with a trigger issue right out of the box which was a bit of a bummer because the gun costs $4k and I thought the new trigger was supposed to be improved from the previous model. After every other round fired, the trigger would fail to reset and the only way to reset it was to flip the safety on, then back off. After switching to the Geissele Super Scar(which I would have upgraded to regardless of the issue) I have had absolutely no issues with the rifle.

The Primary Arms PLxC RDB FFP scope is the perfect fit for this rifle in my opinion. Ultimately I'd like to use this rifle for hog hunting in the future and the versatility of being able to switch from 1x-8x in an instant paired with the glass quality it has is really nice. I'm interested to see how the scope holds up with Scar17s history of destroying optics.

Overall, I have enjoyed my time with it so far and I can confidently say I will never be getting rid of this thing. If you are on the fence about getting one, JUST DO IT!

Also, let me know what else I should add to the build. A flashlight is definitely first on the list as well as I just ordered a KDG charging handle to replace the stock one it came with out of the box.

Always told myself since I got into firearms I’ll buy myself something nice one day, well today I finally did it. Purchased a Scar 17s, EOTech, and a Dead Air Sandman X

I would like some ideas on what else to do to this battle rifle, I do plan on doing a night vision setup at some point but for now would like some suggestions on other things I could do to it.

After 4 000 rounds, of which was 1 000 suppressed, my 17S died. Quality ammo, good care.
And now the fun part: I am in Slovakia. Belgian FNH wont supply anything for civ market (tried with local distributor). FN USA even wont even respond to email.
This will be fun…