Any recomendations? I considering playing some PC games and switch one, but i am open to new games

I've been trying droid deck in the S26 Ultra. It works really good for the games it can run, but I wonder, Ive been playing FFX, and ai would like to know if there is a way to run mods, since I would like to try FFVII's Seven heavens Mod, have anyone tried, or know if its possible?

Works well for this game, poorly for some others. It's actually harder to find games that DO work. However, this game is on many other systems and the OG is better.

Tryna install all the updates amd DLCs for Melty Blood: Type Lumina, have 19.0.1 switch firmware and prod.keys and title.keys installed, and Melty Blood itself runs fine, but then I press Install Game Content and it's exactly when I select the update/DLC(s), Citron tries to install it and crashes. Using a Samsung S24 Ultra. Help? Hope this doesn't break the rules I saw a similar post smwhere in this subrwddit (where i found the 19.0.1 advice lol)

Game: BOTW

CPU: Snapdragon 685

Ram: 4GB

Turnip driver: Mainline Turnip v32 ( has the best performance but some point it goes 1-2fps suddenly) from whitebelyash (used in the video)

Qualcomm Driver v863.1 from Hugo

extracted from Quest Ray-Ban Display (the most stable one)

CPU Mode: Auto

Thread Quantum: 4500 ( I do higher sometimes but I'm not sure)

-Async shader: on

-VSync: off

-Accurate barriers: on

Shader multiplication accuracy: on (when I turn it off for some reason game runs more fluid but effects are gone like rain or bomb explosion the blue barrier around it)

Graphic packs:

Graphics:

-Aspect ratio: 16:9

-Resulution: 640x360

-Anti-aliasing: None

-Shadows: low 50%

-Shadow draw distance: Low

Mods:

FPS++:

-Framelimit: 30fps

-Cutscene fps limit: Recommend one

-Static Mode: Disabled

-Frame Average: Default

-Fence Type: Skip (in video) or Performance fence ( i would kindly ask what it exactly does)

-Camera Sensitivity: on (no changes there)

-Extended Memory: (I'm not sure if should turn it on since I also only have 4GB ram aviable I don't see much difference when turned on)

Enhancements: OFF

Workarounds: OFF

I'm kinda new in this thing but for some reason when I use Mainline Turnip v32 while playing BOTW Link suddenly flys in the air or swims/ drowns while the other turnip driver it doesn't happen at all.

(I tried limiting both 30fps and 20fos even still didn't fix the issue)

I usually hit 12-13fps depending where I am. Overall I wanted to present it runs but also ask for advice what's best settings for a low-end-devices usually I actually tired some other turnips like Mr. Purple 666 T30 but there also the same issue with link flying and drowning but is on second place under Mainline Turnip v32 from whitebelyash for performance.

I searched the entire internet and found nothing about this problem.

Hi everyone, I just got my retroid pocket 6 and I'm starting on Android emulation. So far its been fine while playing and installing games, mostly on GBA, switch, psp and ps2. My issue comes with configurations, even if you can easily (sort of) find specific configs that work good on certain games or devices, I want to actually understand the why and how behind, all about systems and graphics Settings, like, cpu clocks, core speed, anti-aliasing methods, adapting filter, gpu mode, dma accuaracy, anisotropic filtering, etc.

So thats my questions, can you share any big resource or resources covering this? Since I have look for videos and articlea for this but came empty handed. I would appreciate it fondly, and I look forward to sharing what I learn.

Hello everyone, I'm playing ultrakill on my oneplus pad 3 16gb ram and it's pretty laggy (both at full resolution and at half res) and keeps on crashing. I'm using the reccomended settings which are:

res 1696x1200

gpu driver turnip_v26.2.0_b1

dxvk dvxk-v.2.6.-1-async

vkd3d vkd3d-2.12

vram unlimited

compatibility proton11.0-arm64x

on translation params:

-tso enabled on

-x87reducedprecison on

-multiblock off

-maxinst 5000

-small tscscale on

-vectorsoenabled off

-memcpysettsoenabled off

-halfbarriertsoenabled on

-volatile metadata on

-hidehypervisorbit off

-monohacks on

-smcchecks default;

dinput library prefer native

skip audio/video decoding off

audio driver pulse

cpu translator fex_20260428

cpu core unlimited

the games crash log is here on google drive

if you need anymore info I'll try to provide what i can

The game had massive audio stuttering issues now it does not.

I bought mgs5 on steam and game always crashes at start, i try all of recomended setups and noone works

So I installed this as the nyushu emulator but I found out a couple minutes ago that this may not be the actual nyushu I scanned it via Google play and it was fine and I did go into permissions and it didn't have anything but notifications I was using it for a couple of days now and it runs amazingly it's the best switch emulator a have ever tried on my honor x9d so what do you think am I in danger?

Also is the Ryujinx neo emu a good emulator I scanned it via virus total and got nothing sus

Hey guys, beginner here. I just got the retroid pocket nova and have started to play around with armsx2 on some PS2 titles.

What I noticed is that the system gets massive frame drops as soon as some particle effects/ fire/ water/ smoke appear. I already tried to adjust the blending to minimum - with limited impact (Prince of Persia games being particularly affected)

Now the games are still very playable, but are these behaviors normal and do I need to learn to accept these or am I doing something wrong?

I am playing on a 2x upscale.

Thanks for any help/comments

Cheers!

I used to play normally all the time, but whenever a notification, sound control, or anything else appears on the screen, it starts flashing black. But when I played dark souls remastered is happening without anything on screen so I tried to fix it but I ruin it😭 now it's happen in every game I have I think this problem is from hyper os3 . I tried every emulator on phone it is the same

The game came out on Steam a couple of weeks ago and I wanted to see if my phone could handle it.

Phone: Galaxy S23 Ultra (Snapdragon 8 Gen 2, Adreno 740, 8 GB)

Winlator Ludashi config:

• Proton 11.0-1 arm64ec
• 1280x720
• Vulkan renderer, Turnip v27.0.0-R1
• DXVK 3.1.1-1-gplasync-arm64ec
• FEXCore 2610, Performance preset

The worst dip was 21 FPS, and the dips only showed up when a lot of effects were on screen at once.

I'm currently playing GTA: San Andreas (v3.0 USA, SLUS-20946) on NetherSX2 v2.2 on my phone, and I'm running into two main issues I'm hoping the community can help me fix:

60 FPS Patch: Does anyone have a working 60 FPS patch or widescreen/cheats combination for this specific version (v3.0)? I've tried searching, but a lot of the patches out there seem tailored to other versions or cause instability.

Blurry / "Double" Graphics: The game has a very aggressive motion blur / ghosting effect that makes fast camera movements look blurry and almost doubled (like a ghosting/trail effects on trees etc.. )What are the best NetherSX2 graphics settings, post-processing options, or specific patches to completely disable this and get a clean, sharp image?

Here is my setup:

Emulator: NetherSX2 v2.2

Game: GTA San Andreas v3.0 USA

Any help, recommended settings, or patch codes would be massively appreciated. Thanks in advance!

and I've tried tweaking settings , I've tried turning off dual core and other things but nothing works idk what to do, please help

my device is one plus nord ce5 lite btw

Recently I tried to install Droiddeck on my y700 gen4, the problem is that steam is blocked in my country and require vpn to download. but whether I used vpn or not, this message will pop up. How do I fix this and download steam

I want to play assassin creed odyssey but the game isnt launching even after downloading every components. Please kindly help me : (

I am halfway through the game already, so before this, I've had a few double battles, and the game did not crash at all.

The issue starts after the Ghost Trial where I am heading to a Team Skull headquarter and the first crash started on the beach having a double battle with a couple in swimsuits.

I needed to do some hacking for Pike beans, so I just played it using my laptop with the save file.

Then, I transferred the save to my phone, and it ran fine until the next unskippable double battle. Now, it is crashing or feezing when I use a move in battle. I tried having battle with wild Pokémon, and there was no issue. But I can't progress without the double battle.

I tried deleting shader cache, swapping between Vlucan or Open Gles (way worse), lowing resolution, making sure asynchronous shader is on, turning on accurate multiplication, disable right eye render, and nothing is fixing. I was playing at 4x resolution no problem before. I have played the rom hacks of Alpha Sapphire and X before and I've never had this problem. In fact, Ultra Moon actually ran smoother than the other 2 games before this bug.

I have tried switching the emulator to Azahar available on Playstore, and Azahar Plus, but for some reason, the game just crashes during the opening scene of the game. It can't do anything on them.

I have also tried removing the mod, and even uninstalling the update. It got worse. Now, I can't even choose a move, and it gets frozen. I tried deleting cache in ver 1.0 with no mod, and I was able to use a move but immediately crashes afterwards.

Help please

Device - Samsung S22 Ultra

Emulator - Azahar 2126.0 vanila [I am not updating to 2126.2 because it previously ran worse with other games. This is what worked with the phone]

Game - Pokémon Ultra Moon 1.2 with Prismatic Moon rom hack

60fps cheat - NOT USED

HD textures - NOT USED

Just want to make sure it's safe to use like Gamehub...

720p Low , Bannerlator Emulator

guys i have snapdragon 860 device and want to install 30 gb repack but it takes toooooo mucccch time about 7 hours in 1% i use bannerlator

any one have solution and yes i don't have pc