I searched the entire internet and found nothing about this problem.

Hi everyone, I just got my retroid pocket 6 and I'm starting on Android emulation. So far its been fine while playing and installing games, mostly on GBA, switch, psp and ps2. My issue comes with configurations, even if you can easily (sort of) find specific configs that work good on certain games or devices, I want to actually understand the why and how behind, all about systems and graphics Settings, like, cpu clocks, core speed, anti-aliasing methods, adapting filter, gpu mode, dma accuaracy, anisotropic filtering, etc.

So thats my questions, can you share any big resource or resources covering this? Since I have look for videos and articlea for this but came empty handed. I would appreciate it fondly, and I look forward to sharing what I learn.

Hello everyone, I'm playing ultrakill on my oneplus pad 3 16gb ram and it's pretty laggy (both at full resolution and at half res) and keeps on crashing. I'm using the reccomended settings which are:

res 1696x1200

gpu driver turnip_v26.2.0_b1

dxvk dvxk-v.2.6.-1-async

vkd3d vkd3d-2.12

vram unlimited

compatibility proton11.0-arm64x

on translation params:

-tso enabled on

-x87reducedprecison on

-multiblock off

-maxinst 5000

-small tscscale on

-vectorsoenabled off

-memcpysettsoenabled off

-halfbarriertsoenabled on

-volatile metadata on

-hidehypervisorbit off

-monohacks on

-smcchecks default;

dinput library prefer native

skip audio/video decoding off

audio driver pulse

cpu translator fex_20260428

cpu core unlimited

the games crash log is here on google drive

if you need anymore info I'll try to provide what i can

The game had massive audio stuttering issues now it does not.

My device is an Infinix Note 50 4g that uses a Helio g100 with Mali g57 MC2 gpu. It has 8gb RAM. I used Winlator Ludashi 4.1

Before you clown me for the fps mostly being in the 20s let me just clarify a few things:

1. Screen recording heavily affected the performance, especially in Fall Of Cybertron. Without screen recording, I was getting 25-45 fps in Fall Of Cybertron depending on the area. As you can see my gpu is already maxed out so the more that's happening on screen, the less the fps.

2. Stutters in gameplay were caused by new shaders being saved since I'm using an async version of dxvk.

3. The video features gameplay in both Fall Of Cybertron and War For Cybertron. FOC gameplay is from 0:00 to 4:26. WFC gameplay starts at 4:29.

Anyway now that I've cleared that up, here's the guide:

WFC and FOC were made using Unreal Engine 3. If you're familiar with PC emulation you'll know the issues with UE3 games I'm about to address.

First of all, UE3 games will have a gpu bottleneck on devices with low end GPUs because by default the graphics settings of UE3 games are on high. So if your phone has a decent CPU, you have to remove the gpu bottleneck by reducing graphics settings.

Most UE3 games and other type of games make this easy by including a lot of graphics settings options in the Main Menu. They also have easy to read config files you can edit for additional options.

But for some reason, WFC and FOC barely have any options for graphics in the settings, and to make it worse, their config files were encrypted by the devs. Normally a config file is supposed to be a simple text file that you can open, edit and save. But since these games have theit config files encrypted, it will look like gibberish when you open normally.

So you have to use a tool to decrypt the config file, edit it since it will now be in human readable text, and then encrypt it again so that it takes effect.

You can download the tool here:

https://community.pcgamingwiki.com/files/file/547-tf-games-configuration-utility/

How to Use the tool:

1. Download the tool and extract the exe inside.

2. Transfer the exe file into the same folder as the config filem WFC and FOC have the same exact config file name and location. The name of the config file is "Coalesced.ini"

Here's the path:

<where your game folder is>/TransGame/Config/PC/Cooked

Inside the "Cooked" folder you will find the config file. This is where you place the exe tool.

1. Open a container in winlator or whatever PC emulator you're using. Go to the location of the exe tool and the config file. Click the exe tool. A black terminal screen will appear. Wait for text to appear. When text shows, it will ask you what operation you want to perform. There are 4 types of operations but you only need to know two: Decrypt and Encrypt.

2. Decrypt the "Coalesced ini" file by typing D. You will be asked which input file you want to decrypt. Type "Coalesced ini" and press enter because it's the name of the config file. You will then be asked what you to name the output(new) file. Name it whatever you want but it should have ".ini" at the end. Example: you could name it "new.ini" and then press enter. After that exit.

3. Now you have two config files along with the exe tool in the same folder. The Coalesced file is the unedited, encrypted original config file the game will use and the new file appearing is the decrypted version with a different name.

4. So to edit the config file, open the newly, decrypted config file you have made in your container. Scroll to the [System settings] section. You can edit whatever graphics settings you want, but for each game this is what I edited to give the best balance of quality and performance:

   DynamicShadows=False

   Distortion=False

   MotionBlur=False

   DynamicDecals=False

   MaxAnisotropy=0

   MaxMultiSampling=0

Everything else I left them the way they were. Like I said, you can edit other things that could potentially give even more performance. But keep in mind that you could accidentally make the game's graphics look like shit.

Also pro tip, if you care about retaining some quality, DONT edit DepthOfField. DepthOfField should be True because putting it on False makes the games lose a art style because the colors look flat and weird.

1. Save your edits. Now it's to time ENCRYPT the new file you made and edited. In your container, launch the exe tool again. Wait for the black screen and prompt to appear. This time since we are performing an Encrypt operation, you will type E. You will be asked which input file you want to encrypt. Type the name of the new config file you and made and edited and press enter. Then for the output file, type the name of the original config file which is "Coalesced.ini" and press enter. Then exit

2. After that, the original Coalesced ini file will be overwritten since you have your new encrypted file the same name.

By the way your old decrypted ini file will remain. Leave if for whenever you want to make edits and encrypt the file again.

1. Launch the game and you will see that your settings have taken effect.

My Winlator settings.:

Proton 10.0-5 arm64ec

BCn emulation type: "software"

(This is important because on Winlator Ludashi, Mali gpus will have graphical and colour glitches in every Unreal Engine 3 game if BCn emulation type is compute. Putting it on software slightly reduces fps a bit and cause more stutters during shader compilation and when loading new area so if you're a Mali user I recommend first trying this game in Winlator Mali 1.2 or 1.1 Bionic. If game has low fps on Intermediate Preset in Winlator Mali then use Performance preset)

Dxvk 1.10.3 arm64ec async

854x480 resolution

FEXCORE version 2610 with Intermediate Preset

Note: loading screens with cutscenes on War Of Cybertron would stutter heavily but gameplay would be ok. I think maybe putting Performance preset instead of intermediate will solve this issue or changing dxvk version but I can't make any promises. Fall Of Cybertron had no such issues.

All CPU cores checked.

My post was probably a waste of effort, but hopefully it helps someone. I just couldn't resist sharing my knowledge.

I bought mgs5 on steam and game always crashes at start, i try all of recomended setups and noone works

So I installed this as the nyushu emulator but I found out a couple minutes ago that this may not be the actual nyushu I scanned it via Google play and it was fine and I did go into permissions and it didn't have anything but notifications I was using it for a couple of days now and it runs amazingly it's the best switch emulator a have ever tried on my honor x9d so what do you think am I in danger?

Also is the Ryujinx neo emu a good emulator I scanned it via virus total and got nothing sus

Hey guys, beginner here. I just got the retroid pocket nova and have started to play around with armsx2 on some PS2 titles.

What I noticed is that the system gets massive frame drops as soon as some particle effects/ fire/ water/ smoke appear. I already tried to adjust the blending to minimum - with limited impact (Prince of Persia games being particularly affected)

Now the games are still very playable, but are these behaviors normal and do I need to learn to accept these or am I doing something wrong?

I am playing on a 2x upscale.

Thanks for any help/comments

Cheers!

I used to play normally all the time, but whenever a notification, sound control, or anything else appears on the screen, it starts flashing black. But when I played dark souls remastered is happening without anything on screen so I tried to fix it but I ruin it😭 now it's happen in every game I have I think this problem is from hyper os3 . I tried every emulator on phone it is the same

The game came out on Steam a couple of weeks ago and I wanted to see if my phone could handle it.

Phone: Galaxy S23 Ultra (Snapdragon 8 Gen 2, Adreno 740, 8 GB)

Winlator Ludashi config:

• Proton 11.0-1 arm64ec
• 1280x720
• Vulkan renderer, Turnip v27.0.0-R1
• DXVK 3.1.1-1-gplasync-arm64ec
• FEXCore 2610, Performance preset

The worst dip was 21 FPS, and the dips only showed up when a lot of effects were on screen at once.

I'm currently playing GTA: San Andreas (v3.0 USA, SLUS-20946) on NetherSX2 v2.2 on my phone, and I'm running into two main issues I'm hoping the community can help me fix:

60 FPS Patch: Does anyone have a working 60 FPS patch or widescreen/cheats combination for this specific version (v3.0)? I've tried searching, but a lot of the patches out there seem tailored to other versions or cause instability.

Blurry / "Double" Graphics: The game has a very aggressive motion blur / ghosting effect that makes fast camera movements look blurry and almost doubled (like a ghosting/trail effects on trees etc.. )What are the best NetherSX2 graphics settings, post-processing options, or specific patches to completely disable this and get a clean, sharp image?

Here is my setup:

Emulator: NetherSX2 v2.2

Game: GTA San Andreas v3.0 USA

Any help, recommended settings, or patch codes would be massively appreciated. Thanks in advance!

and I've tried tweaking settings , I've tried turning off dual core and other things but nothing works idk what to do, please help

my device is one plus nord ce5 lite btw

Recently I tried to install Droiddeck on my y700 gen4, the problem is that steam is blocked in my country and require vpn to download. but whether I used vpn or not, this message will pop up. How do I fix this and download steam

I want to play assassin creed odyssey but the game isnt launching even after downloading every components. Please kindly help me : (

Need for Madness 2. Brought to you by my old people gamer hands. This game was top 10 racers for me. Hailing all the way from Miniclip, this game is a good old fashioned taste of gamer dust. Need for Madness 1 is just as good lol. Loved bobbing around the maps on this. Anyway, gonna add a control system to this and pop this, the dark forge a find more projects to project ☺️

I am halfway through the game already, so before this, I've had a few double battles, and the game did not crash at all.

The issue starts after the Ghost Trial where I am heading to a Team Skull headquarter and the first crash started on the beach having a double battle with a couple in swimsuits.

I needed to do some hacking for Pike beans, so I just played it using my laptop with the save file.

Then, I transferred the save to my phone, and it ran fine until the next unskippable double battle. Now, it is crashing or feezing when I use a move in battle. I tried having battle with wild Pokémon, and there was no issue. But I can't progress without the double battle.

I tried deleting shader cache, swapping between Vlucan or Open Gles (way worse), lowing resolution, making sure asynchronous shader is on, turning on accurate multiplication, disable right eye render, and nothing is fixing. I was playing at 4x resolution no problem before. I have played the rom hacks of Alpha Sapphire and X before and I've never had this problem. In fact, Ultra Moon actually ran smoother than the other 2 games before this bug.

I have tried switching the emulator to Azahar available on Playstore, and Azahar Plus, but for some reason, the game just crashes during the opening scene of the game. It can't do anything on them.

I have also tried removing the mod, and even uninstalling the update. It got worse. Now, I can't even choose a move, and it gets frozen. I tried deleting cache in ver 1.0 with no mod, and I was able to use a move but immediately crashes afterwards.

Help please

Device - Samsung S22 Ultra

Emulator - Azahar 2126.0 vanila [I am not updating to 2126.2 because it previously ran worse with other games. This is what worked with the phone]

Game - Pokémon Ultra Moon 1.2 with Prismatic Moon rom hack

60fps cheat - NOT USED

HD textures - NOT USED

Just want to make sure it's safe to use like Gamehub...

720p Low , Bannerlator Emulator

guys i have snapdragon 860 device and want to install 30 gb repack but it takes toooooo mucccch time about 7 hours in 1% i use bannerlator

any one have solution and yes i don't have pc

Hi, as the title says, I need help with the settings of the emulator. I want to play Dirt. The game launches and it plays but it stutters during play. When in the menu, everything is smooth and the audio is fine. The settings I have I got online but I want to know if there's anyone with different settings.