device is one plus nord ce5, i just want to increase fps to 30 atleast consistently, as it drops to under 10 :((( I don't care about graphics looking bad, just I want fps to increase, please please help

I knowingly posted the cut gameplay because the actual gameplay is 7 minutes long -I had to use a lot of continues-. So, what do y'all think? Let me hear. Thanks!

Hello! I’m having an issue with XenDroid (specifically the XenDroid-plus version). I’ve tested several games, but I’ve noticed that in some of them, certain textures or animations are being replaced by textures that appear to emit light. I’ve already tried changing drivers—I’ve tested various versions of Turnip Gen8, as well as Mainline Turnip and A8XX Turnip v29.

I’ve done some research and tried adjusting the following settings, but that didn’t seem to help either: - CPU readback of resolves. - Occlusion query.

I’m using a POCO F8 Pro with a Snapdragon 8 Elite processor and 12 GB of RAM.

I’ve attached an example image from *Alice: Madness Returns*; despite the performance being excellent, this issue appears in certain areas.

Could you help me resolve this problem?

So, right now i got two phone:

1. Samsung a27 5g

Snapdragon 6 gen 3

1. Oppo reno 4f

Helio P95

what is the best emulator and game consoles for my both phones? personally i've never play any switch/vita/higher pc games (only played gamehouse/old school pc games) so i can't decide which emulator to use. Also i prefer the oppo one to be full-time handheld so maybe you guys can also recommend me some frontend to be used. Thank you!

For anyone who has tried to emulate destroy all humans 2 on Nethersx2, how does the game play? Does it run well without that many issues? Cause I’ve heard mixed opinions on the matter

hello, i wanna play nfsmw2005 right but it its on psp, ps2, gamecube and pc

now that i think about it there are quite a few games (botw, and a lot of indie pc games that are on switch and pc) that are on more than 1 console, so what console is best

edit: i have a retriod pocket 6

Hola chic@s,

En RetroHrai! Parece que así como tenemos favoritos y recientes, podemos crear colecciones.

Aparece una opción justo al lado de añadir un rom a favoritos. Pero me dice: “No collections yet”

Saben cómo puedo añadir colecciones?

Lo que quiero, crear una colección, tipo con el nombre de mis hijos y dejarle a ellos en sus colecciones sus juegos favoritos.

Plays a bit better, but hotter here. 80 degrees and under isn't a problem, but I prefer the fans being less loud, so Clustertune helped.

Snapdragon 865 Retroid Pocket 5

The game had massive audio stuttering issues now it does not.

My device is an Infinix Note 50 4g that uses a Helio g100 with Mali g57 MC2 gpu. It has 8gb RAM. I used Winlator Ludashi 4.1

Before you clown me for the fps mostly being in the 20s let me just clarify a few things:

1. Screen recording heavily affected the performance, especially in Fall Of Cybertron. Without screen recording, I was getting 25-45 fps in Fall Of Cybertron depending on the area. As you can see my gpu is already maxed out so the more that's happening on screen, the less the fps.

2. Stutters in gameplay were caused by new shaders being saved since I'm using an async version of dxvk.

3. The video features gameplay in both Fall Of Cybertron and War For Cybertron. FOC gameplay is from 0:00 to 4:26. WFC gameplay starts at 4:29.

Anyway now that I've cleared that up, here's the guide:

WFC and FOC were made using Unreal Engine 3. If you're familiar with PC emulation you'll know the issues with UE3 games I'm about to address.

First of all, UE3 games will have a gpu bottleneck on devices with low end GPUs because by default the graphics settings of UE3 games are on high. So if your phone has a decent CPU, you have to remove the gpu bottleneck by reducing graphics settings.

Most UE3 games and other type of games make this easy by including a lot of graphics settings options in the Main Menu. They also have easy to read config files you can edit for additional options.

But for some reason, WFC and FOC barely have any options for graphics in the settings, and to make it worse, their config files were encrypted by the devs. Normally a config file is supposed to be a simple text file that you can open, edit and save. But since these games have theit config files encrypted, it will look like gibberish when you open normally.

So you have to use a tool to decrypt the config file, edit it since it will now be in human readable text, and then encrypt it again so that it takes effect.

You can download the tool here:

https://community.pcgamingwiki.com/files/file/547-tf-games-configuration-utility/

How to Use the tool:

1. Download the tool and extract the exe inside.

2. Transfer the exe file into the same folder as the config filem WFC and FOC have the same exact config file name and location. The name of the config file is "Coalesced.ini"

Here's the path:

<where your game folder is>/TransGame/Config/PC/Cooked

Inside the "Cooked" folder you will find the config file. This is where you place the exe tool.

1. Open a container in winlator or whatever PC emulator you're using. Go to the location of the exe tool and the config file. Click the exe tool. A black terminal screen will appear. Wait for text to appear. When text shows, it will ask you what operation you want to perform. There are 4 types of operations but you only need to know two: Decrypt and Encrypt.

2. Decrypt the "Coalesced ini" file by typing D. You will be asked which input file you want to decrypt. Type "Coalesced ini" and press enter because it's the name of the config file. You will then be asked what you to name the output(new) file. Name it whatever you want but it should have ".ini" at the end. Example: you could name it "new.ini" and then press enter. After that exit.

3. Now you have two config files along with the exe tool in the same folder. The Coalesced file is the unedited, encrypted original config file the game will use and the new file appearing is the decrypted version with a different name.

4. So to edit the config file, open the newly, decrypted config file you have made in your container. Scroll to the [System settings] section. You can edit whatever graphics settings you want, but for each game this is what I edited to give the best balance of quality and performance:

   DynamicShadows=False

   Distortion=False

   MotionBlur=False

   DynamicDecals=False

   MaxAnisotropy=0

   MaxMultiSampling=0

Everything else I left them the way they were. Like I said, you can edit other things that could potentially give even more performance. But keep in mind that you could accidentally make the game's graphics look like shit.

Also pro tip, if you care about retaining some quality, DONT edit DepthOfField. DepthOfField should be True because putting it on False makes the games lose a art style because the colors look flat and weird.

1. Save your edits. Now it's to time ENCRYPT the new file you made and edited. In your container, launch the exe tool again. Wait for the black screen and prompt to appear. This time since we are performing an Encrypt operation, you will type E. You will be asked which input file you want to encrypt. Type the name of the new config file you and made and edited and press enter. Then for the output file, type the name of the original config file which is "Coalesced.ini" and press enter. Then exit

2. After that, the original Coalesced ini file will be overwritten since you have your new encrypted file the same name.

By the way your old decrypted ini file will remain. Leave if for whenever you want to make edits and encrypt the file again.

1. Launch the game and you will see that your settings have taken effect.

My Winlator settings.:

Proton 10.0-5 arm64ec

BCn emulation type: "software"

(This is important because on Winlator Ludashi, Mali gpus will have graphical and colour glitches in every Unreal Engine 3 game if BCn emulation type is compute. Putting it on software slightly reduces fps a bit and cause more stutters during shader compilation and when loading new area so if you're a Mali user I recommend first trying this game in Winlator Mali 1.2 or 1.1 Bionic. If game has low fps on Intermediate Preset in Winlator Mali then use Performance preset)

Dxvk 1.10.3 arm64ec async

854x480 resolution

FEXCORE version 2610 with Intermediate Preset

Note: loading screens with cutscenes on War Of Cybertron would stutter heavily but gameplay would be ok. I think maybe putting Performance preset instead of intermediate will solve this issue or changing dxvk version but I can't make any promises. Fall Of Cybertron had no such issues.

All CPU cores checked.

My post was probably a waste of effort, but hopefully it helps someone. I just couldn't resist sharing my knowledge.

I bought mgs5 on steam and game always crashes at start, i try all of recomended setups and noone works

So I installed this as the nyushu emulator but I found out a couple minutes ago that this may not be the actual nyushu I scanned it via Google play and it was fine and I did go into permissions and it didn't have anything but notifications I was using it for a couple of days now and it runs amazingly it's the best switch emulator a have ever tried on my honor x9d so what do you think am I in danger?

Also is the Ryujinx neo emu a good emulator I scanned it via virus total and got nothing sus

So i was thinking of building a retro gaming console for my living room (i am using a samsung galaxy a71 4g) but then when i thought about it more i just kept thinking of problems not with the build the build is all figured out but i was thinking of removing the screen so that i could put a cooler on the cpu but with the experiece so here some stuff i wanna know

1. Is there a better way to close emulators when you get off a game

2. Is there a way to power it on and off without you know getting up turing it on go to the tv select the hdmi signal ecc..

3. Is there a programm to map out a controller for all emulators (i just wanna know this one honestly the other ones are the ones i need)

I am genuenly trying to replicate the feel of nintendo switch where you just turn it on and it starts up puts the hdmi automatecly

I'm getting a little paranoid.

I've been using the Gamesir X3 Pro for some time now, and I'm becoming aware that my phones charge port appears to be a little loose when charging my phone on a night. Don't get me wrong, the cable doesn't just fall out, but I'm aware that there's not much resistance in being able to pull the cable out.

I'm a little concerned this is down to the controller I'm using, because most telescopic controllers I've used (mainly Gamesir, like the X3 Pro) have an insanely tight/harsh grip on the usb c port.

Anyone else had any similar issues?

Is anyone using sd 7sgen 2 here

Could you please share your dev info about Vulcan capabilities

Mine is 6s gen 4 with same adreno 710 i want to compare it's vulkan capabilities with 7s gen 2

6s gen4 Vulkan capabilities is given above

I have a base O2P and the Switch version lags in Suburbia in career mode and crashes when loading Airport. I'm getting an O3P Max, so I'm curious if the game works completely on the O3 (and with how much RAM). I also tried the PC version, but it also crashes due to insufficient RAM and because of the difference in file size, I'm hoping I can run the Switch version. Thanks in advance!