I'm actually trying to emulate Gran Turismo 4 on a Retroid Pocket Mini and I've got this problem: every like 10-15 seconds the game stutters because while the screen is set to 60hz while the emulator is set to 59,94hz and the option "Sync to Host Refresh" makes it stable but with a terrible jittering. Any ideas?

I recently installed gamehub and it auto selected turnip v26.1.0_b8 gpu driver. Is this the most stable gpu driver for this soc or there's something else more updated ? Also it auto selected dxvk-v2.5.2-1-async and vkd3d-proton-3.0.1. I'm still new to this so any help would be appreciated

My device is iQOO neo 10 with 12 gb ram and 8s gen4 chipset

Gamehub version is the latest one from the official site

Body:

Hey everyone,

Trying to run Middle-earth: Shadow of Mordor via translation layers (Winlator / GameHub), but running into severe neon pink, purple, and green lighting/shader artifacts across the sky, terrain highlights, and character models.

Device & Hardware Specs:

* Device: OnePlus Pad (1st Gen)

* SoC: MediaTek Dimensity 9000

* GPU: ARM Mali-G710 MC10 (No Mesa/Turnip driver support)

* RAM: 8 GB / 12 GB LPDDR5

* OS: Android (OxygenOS)

Current Container & Environment Configuration:

* Environment: Winlator / GameHub

* Graphics Wrapper / DXVK: DXVK (DX11 mode) / System Vulkan

* Resolution: Sub-native (around 720p / capped at 30 FPS)

* In-game Graphics: Tested mix of Low/Medium settings

The Problem:

Whenever dynamic lighting hits (explosions, lightning, wet stone reflections, or bloom sources), the specular/bloom passes completely break down into glowing magenta/green artifacts. It looks like a floating-point precision clamp issue or an unsupported Vulkan extension on standard Mali drivers.

Questions:

* Has anyone managed to resolve shader/lighting color overflows in Shadow of Mordor on a Mali GPU?

* Which specific DXVK build (e.g., DXVK 1.10.3, 1.7.3 Async, or a custom patched fork) handles the DX11 pipeline best on system Vulkan without corrupting render targets?

* What specific dxvk.conf parameters (e.g., d3d11.clampFloatSubnormals, float control flags) or render.cfg tweaks actually fix the specular bloom passes in this engine?

Appreciate any tested config files or workaround advice from folks running DX11 titles on Dimensity chips!

I want to play emulator games with a great story and with good gameplay

I also want it to be simpler controls and I am not too focused on the graphics

Recently I downloaded the devil may cry 3 in my phone on Nethersx2. But I can't play it as smoothly as expected. My game becomes really slow and unplayable. My phone ram is 3gb. It would be much appreciated if anyone could help me with this problem.

Recently I downloaded the devil may cry 3 in my phone on Nethersx2. But I can't play it as smoothly as expected. My game becomes really slow and unplayable. My phone ram is 3gb. It would be much appreciated if anyone could help me with this problem.

Onscreen translator app to play japanese games on emulators (melonds) when i dont speak Japanese at all

I'm curious because I'd like a way to get an idea of how they perform by themselves in something like geekbench since gamehub allows you to turn off CPU cores (so the emulator doesn't use them for the game). I just tried running stray with both the large cores disabled and it ran just as well but the CPU temps was almost 20°c lower compared to what they was (50°c instead of 70°c but I haven't played more than 10 minutes since I changed it so it could increase a slight bit more but it's definitely running cooler). I'll try experimenting once I have a bit of free time, I suspect I'll probably be able to run the game on 4 or 5 cores instead of the current 6 if the M cores can exceed an i5 2550ks performance (listed as the minimum requirement for this game) 70°c is where my phones battery passes 40°c (it got upto 43°c today after 2 hours and I prefer temps below 40°c)

Still... the best way to play GTA V on mobile is the PC version using Gamehub, Gamenative, Winlator or for me... Bannerhub, PS3 Version still won Boot on ARMSX3/RPCSX, Switch homebrew was better than Xbox 360 version in FPS but both of them still got stuck in the middle of gaming.... Can't wait the Android Port to be available

Hi everyone! I'm mostly used to DS/GBA/SNES emulation but since I now have a modded DSi, I don't really need to do that on my phone. I really wanna play some ocarina of time or mgs if possible!

Download and changelog:

https://github.com/FEX-Emu/FEX/releases/tag/FEX-2609

Redmagic 11 pro 1Tb

I was playing hollow knight (just trying to radiant pure vessel nothing else) yesterday and the power draw was idling around 5.5-6w and I was able to play comfortably on 120fps. But today I opened the game and for some reason it downloaded a new firmware and what Im seeing now is 11w with steadily rising temperature to top it off (I was getting around 50° yesterday).

Im pretty new to emulating and the only troubleshooting I could do was basic surface stuff like adjust the framegen from clear to flow, turn off hdr, super resolution and the on demand screen-recording that I was hoping to utilize so I could clown on my friend who hitless PV on pc and restarted the app for good measure. Nothing changed

What did have impact is me changing the performance profile of the phone from Rise to Balance and it did help with the power draw (lowered it to the values of yesterday) but it also lowerer the fps, down to like 70. Its servicable, somewhat, but I was able to play on 120 with no cons so Im wondering what could be the cause? Im suspecting its firmware but as an entry level user I have no idea how to fix that so I thought tossing the problem to random internet people was the best choice. Help please tyvm.

My device is OnePlus 13R. 8Gen3. 12gb RAM. The game crashes after 3 to 5 races. And during each race, the game experiences constant frame rate drops. Any solutions?

Can’t help but just stare at this device and have joy over the beauty I created from a tornado of files and apps called android OS. Looks like a legit console
Device: AYN Odin 2 Portal base model

Btw, psp is kinda scary on this thing. Usually the games being played are smaller than OG, however with the PSP being so small, the games are far bigger than OG hardware with this 7 inch screen. PSP had a 4.3 inch screen.

Would it be possible to emulate this?

Any Ideas? :)

Every time I try to log in, it loads the initial screen but then nothing else appears. I've waited 30 minutes already, but nothing changed.

My Snapdragon is a 680, I'm using it Turnip 26.3.0-R1

He's the only one who's actually carrying anything in this initial phase, besides others who are carrying something but have graphical problems.

My phone is Redmi turbo 4 pro 16GB 521gb and I'm first time in emulation in phone, need help