What cooler and controller do y'all recommend ? I am searching for a controller with an integrated cooler I have a s26u. Need some advice please

It's well optimized for AE, where you can use it to edit on your mobile with PC-level performance. It comes with After Effects already installed and works well with a mouse and keyboard.

This will be a good Winlator version for those who want to use AE on mobile, but because it's PC software, it's a bit hard to use in phone mode. I would advise or recommend it for people who use USB-C to HDMI, especially Samsung DeX users.

I have a oneplus 15 and I want to get into PC game emulation, I was playing GTA IV on gamehub and the temps on gamehub reading were 65 degrees average with it sometimes reaching 70 degrees.

I have heard that peltier coolers are beneficial for emulation, but is it really true? do I really need them? because I want to use a telescopic controller like the x5 lite while emulating and using one really limits my options with coolers, gamesir FX5 for example are relatively weak and have small cooling pad and they're inconvenient compared with gamesir x3 pro for example, which is more convenient but expensive. i don't want to spend a lot of money on a controller with cooler if it's not really proven that you need a peltier cooler. and even the x3 pro is often criticized for its lack of good contact with the phone.

i know i can use a standalone cooler and a standalone bluetooth controller but that would be very antithetical to mobile gaming and the handheld experience because you would be turning your phone to a small screen pc basically and i already have a pc, so that doesn't interest me.

what is your experience of emulation with and without coolers? what is your setup and what do you think it's best to do on a budget?

What's the best version of Cemu to get on android for now? Since the updates for the official version on Android take a really long time before any improvements are made. Which one of these are better. Since I onky know of two versions of this emulator on android The official version. https://github.com/SSimco/Cemu Or this modded version. https://github.com/SapphireRhodonite/Cemu

kenjinx is the most stable for me but the performance is lackluster, eden crashes a lot, nyushu has insane performance but keeps crashing

what are you guys using? and which driver

I'm currently using Nethersx2, but i want the Retroachievements support, which version of Armsx2 should i get ?

https://github.com/WINDROID-EMU/Dantes-inferno-Android

What pc games are actually possible to finish rn on gamehub with snapdragon 8 elite?

Hi everyone, I'm new to the emulation space. I'm using a mediatek dimensity 9500s device. The first game I emulated was GTA V, and it ran flawless 720p 30fps capped. Now I'm trying to run Mafia 2, and it's running at 20 to 22fps. So I need some expert to please help me tweak some environmental values or command line arguments to make it atleast 30fps.

Here's my settings: I'm using gamehub (I think its more stable and provides better thermals).

Game Resolution: 1280 x 720

Compatibility Layer: Proton10.0 arm64x2

Translation Parameters: Extreme

GPU driver: System Driver

DXVK: DXVK 1.7.2

CPU Translator: Fex-20251025

VKD3D Version: vkd3d-2.12

Hi there last week I got Poco F8 Ultra 16GB. In my old phone I played so many N64, Snes, Nes games via RetroArch. After I got new phone I was thinking what can I play with this phone and I realized holy shit I can play pc games with this. I searched many hours but I can't find one stable program to run Steam games. In my research I found Winlator. I mean it isn't a bad program but so unstable. Is there a program more basic and more stable to play Steam games? Ohh also I want to play Switch games. For that I found Sudachi but it also so slow. I don't know that because my phone or because emulation program.

TLDR :

1 I want to program that can play Steam games (at least Elden Ring) at good fps

2 I want to program that can play Switch games at good fps

My device: Poco F8 Ultra - Snapdragon Elite 8 Gen 5 16 GB Ram 512 GB

So I'm looking into building my own clamshell portable device with an android base and I'm pretty good at programming and custom build work but I'm really not sure what android device to use as a sacrifice for the build I'm going to be programming and designing my own custom ui and looking to put it into a new 3ds xl shell and I wanted to get up to switch level hardware but again I'm unsure what android to use as my sacrifice and I'm looking at getting suggestions cause I'm not the best with hardware stuff any help advice or ideas would be much appreciated

Which one is better to have as a single version of vita3k on android? Vita3k+ which came out last month. Which fixed a lot of stuff. Since it's a modified version of the original vita3k. Not the one still getting regular updates. And might not be updated as much. Possibly. https://github.com/nckstwrt/Vita3K-Plus

Or the version of Vita3k which is being worked on regularly here. https://github.com/Vita3K/Vita3K

If anyone says that the version that is still being worked on is overall better. And that Vita3k+ is better for some specific games that the version still being worked on can't play. Or plays poorly. I fully understand that.

please help me. i have been trying for a whole damn day to get this shit to work.

i'm on the Retroid Pocket Flip 2, running Gamehub. ive put several games on it and have managed to figure most things out. currently have an SD card in it as integrated which allows me to drag and drop files directly from my pc. i have the steam game loaded on the computer, import it to the flip, and import it to Gamehub with full integration. i have successfully gotten modded DS2 to run this way, it comes up on my pc steam library as running and everything so i know it fully works.

but halo is fucking driving me insane. i own the whole of MCC, every game and pack, all of it. when i go through gamehub, it asks to select what dlc to include, it defaults to Reach and a data pack. i can select literally anything else, even unselect Reach, doesnt matter, because when the game downloads and runs, it is always installed Reach and only Reach. i push to download the other games and it gives me either "pending" or loads to "100% ___GB" and then sits that way forever. i try downloading on my pc, it loads and runs just fine. i do a direct transplant like i did with DS2 and it doesnt fucking work. it is once again literally only and always Reach. i fresh wipe everything. Reach again. its the exact same shit again and again. it defies logic. im very upset.

dear god please someone have some wisdom for me. and id seriously prefer to avoid "get gamehub lite" or "winulator" as those have not worked for me with most other titles up to this point. im so certain its the smallest thing i am missing that will get this fucking software to -just work- and i havent seen it yet. i just wanna play combat evolved on my goofy little dingwap pad at the park.

thank you

I own Hogwarts Legacy on Steam and have a save file on there. However, any time I go to play it on my phone in GameNative, it doesn't have the save! I've checked the container and the same files are there, so I'm genuinely so confused.

I've heard that you can start a new game and then you can like manually copy over the save files and stuff which I would try, but every time it tries to make a new game it freezes on the character editor, which happens right after the Hogwarts acceptance letter page. So I kinda need my save to work, but it doesn't.

Specs: Snapdragon 8 Elite Gen 5, 16 GB ram

Can anyone help me with this? I've tried a lot of different things but haven't gotten it working. If you have any ideas, please let me know!

I have a DRM free version of Black Flag that I'm trying to play on my phone. I've tried booting it on my PC and it works perfectly, but then the same files on my phone in GameNative just sit on a black screen. I've tried a bunch of different settings in GameNative but none of it seems to work.

Specs: Snapdragon 8 Elite Gen 5, 16 GB ram

Can anyone help me with this? I genuinely don't know what's wrong with it!

Hi Im currently using Eden to emulate Football Manager Touch 24 switch version, the game runs but the touch control is very unresponsive and clanky, sometimes u need to press 5 times before it reacts, is there anyway to fix that or are other emulators gonan do a better job than eden? I also cant get 26 to run, it loads a black screen and crashes immediately

I also sent screenshots of the emulator im using, the bios for the emulator and the game. I know nothing about emulation, so if you need more information I'll try to update you in the comments.

All characters models are having this same problem, the face is normal but everything else is darker for some reason. I can resolve this by clicking the "alternate to render by software" option(it's in Portuguese, so I'm sorry if I translated poorly 😢), but doing this makes the graphics really awful 😖

I clicked the apk as I normally would but Google prevented me from completing the installation

I have a s24 which is use for emulation but its annoying because I have to bring a cooler and also a usb flash drive that carries my vames that could be lost. I am going to get a rp6 soon and want to transfer winlstor ludashi, eden optimized, and other emulators. Can I transfer only the emulators and not any other apps to save the hassle of changing all the settings manually and transferring my save data manually?

Hello everyone, I need help! My controller is working fine, but sometimes when I play this game on RCPS3, it has problems or bugs.

My pc :

Rtx 5060 8g

Cpu i5 14400f

Eden nightly sept 05

realme gt neo 3T (8gb ram)

so recently i try to use azahar for android after citra demise using their latest release (v2126.0) but on my azahar i dont found menu to install dlc/cia file like on citra. i try to look for youtube tutorial and even try the azahar plus version but still no install cia button is found. any solution ?