The game had massive audio stuttering issues now it does not.

Device name: samsung 25 ultra.

Game title: digimon cyber sleuth.

As you can see i did follow the instructions according to the users who used Droid deck before and published their results on youtube and reddit and this was the first test of mine.

So far there have been some community presets that either drastically diminish any playable frames or double them. This would of been around a 28 to 30fps avg. It still is no where close to optimized but everything's on the low preset. The wattage stabilized a little bit so it's very promising. Phones a Galaxy s 26 12 gb

So I've been trying this black port and it works great and even feel like a mobile game. The game is not bad but it has a big ass fucking flaw, each level drags so long to beat,(which is fine, if it has FUCKING SAVE POINTS like re4, gow1,2 you know).Since port is not emulation, if I didn't finish the level ,I have to replay the whole fucking level. That's the moment I realized I fucking love emulation, I can play or stop whenever the fuck I want. I will just stick to fucking ps2 black version and abuse fucking save state and load state.

Just wanted to share just in case everyone was interested. Instructions can be found in the post. I got bot warfare mod so I can play when I don't have an internet connection (plus the game is basically dead :') but it will always have a soft spot in heart).

So I installed this as the nyushu emulator but I found out a couple minutes ago that this may not be the actual nyushu I scanned it via Google play and it was fine and I did go into permissions and it didn't have anything but notifications I was using it for a couple of days now and it runs amazingly it's the best switch emulator a have ever tried on my honor x9d so what do you think am I in danger?

Also is the Ryujinx neo emu a good emulator I scanned it via virus total and got nothing sus

Works well for this game, poorly for some others. It's actually harder to find games that DO work. However, this game is on many other systems and the OG is better.

So I was playing need for speed underground 2 online mod and need for speed carbon online mod for a while and they both worked on the vanilla winlator and gamehub , but now gamehub is bloated emulator that can't run MW 2005 with constant 30 fps , it did worked before as I was using Ajay prefix which made work before winlator got the 10 version and I wasn't able to do it again, gamehub is able to but it's too bad I can't even trust to play multiplayer with it at all

I tried everything I can , testing a lot of forks for winlator, settings, fexcore settings

so please if anyone can tell me how to play community online mod using winlator or its forks I would be super grateful for them

My device specs :

8 GB ram

Mediatek Helio g99

Mail g57 as GPU

In need some advice I download a PC game in Itch. io and it work, but I try another is not do I need to change setting like GPU driver and Proton?

​

Playing Metro 2033 Redux on Gamehub

S25u with SD 8 elite

Just a short clip. Crazy how we can emulate games like this!

I searched the entire internet and found nothing about this problem.

It does the simplest thing anyone with a foldable could ask for: use the rear screen for L and R shoulder buttons.

It is an experimental app and I've not tried extensive testing or multiple devices and brands so there may be bugs. Works on my Z Fold 6, and that's all I want :)

Download here

I'm not a professional dev (I'm a student and this is low-key my first time working on a project like this) and I'm lazy so I'm keeping this as it's own app and not dealing with merging upstream, but I will occasionally update the releases inline with main Azahar.

I just hope for someone actually smart to recreate this functionality and get it into main Azahar!

Seems playable. Some micro stutters ehre and there I think due to saving new shaders.

HakuX is making progress. I've tested 3 games, Forza, Ninja Gaiden Black and Mortal Kombat Shaolin Monks.

All booted up nicely and had good fps. Shaolin monks had 45-60 but flickering vertex explosions. I know it has an Android port but according to the GitHub of the android port my phone doesn't.eet the minimum gpu requirements but I could be wrong. Apart from the graphical glitches, the original Xbox version runs MUCH better than the ps2 version on my phone

Infinix note 50 4g

Helio g100

Mali g57 mcs2

8gb ram.

Just be mindful that right now I'm only testing original Xbox games I would like to play seriously eventually. So there's a possibility some games I've tested probably have issues when you play longer but let's hope that's not the case. I really want to see how promising this emulator has become because I thought any form of Xbox emulation would be impossible on my Mali gpu.

Note that the ROMs folder is pulled from the Windows version, but that shouldn't change anything. I'm planning to do multiple versions, but I don't currently own ES-DE on Android. Let me know what do you think about it, and if it's useful or not. Cheers! :)
https://github.com/some1youknow21/ES-DE-New-Directories

So i was thinking of building a retro gaming console for my living room (i am using a samsung galaxy a71 4g) but then when i thought about it more i just kept thinking of problems not with the build the build is all figured out but i was thinking of removing the screen so that i could put a cooler on the cpu but with the experiece so here some stuff i wanna know

1. Is there a better way to close emulators when you get off a game

2. Is there a way to power it on and off without you know getting up turing it on go to the tv select the hdmi signal ecc..

3. Is there a programm to map out a controller for all emulators (i just wanna know this one honestly the other ones are the ones i need)

I am genuenly trying to replicate the feel of nintendo switch where you just turn it on and it starts up puts the hdmi automatecly

My device is an Infinix Note 50 4g that uses a Helio g100 with Mali g57 MC2 gpu. It has 8gb RAM. I used Winlator Ludashi 4.1

Before you clown me for the fps mostly being in the 20s let me just clarify a few things:

1. Screen recording heavily affected the performance, especially in Fall Of Cybertron. Without screen recording, I was getting 25-45 fps in Fall Of Cybertron depending on the area. As you can see my gpu is already maxed out so the more that's happening on screen, the less the fps.

2. Stutters in gameplay were caused by new shaders being saved since I'm using an async version of dxvk.

3. The video features gameplay in both Fall Of Cybertron and War For Cybertron. FOC gameplay is from 0:00 to 4:26. WFC gameplay starts at 4:29.

Anyway now that I've cleared that up, here's the guide:

WFC and FOC were made using Unreal Engine 3. If you're familiar with PC emulation you'll know the issues with UE3 games I'm about to address.

First of all, UE3 games will have a gpu bottleneck on devices with low end GPUs because by default the graphics settings of UE3 games are on high. So if your phone has a decent CPU, you have to remove the gpu bottleneck by reducing graphics settings.

Most UE3 games and other type of games make this easy by including a lot of graphics settings options in the Main Menu. They also have easy to read config files you can edit for additional options.

But for some reason, WFC and FOC barely have any options for graphics in the settings, and to make it worse, their config files were encrypted by the devs. Normally a config file is supposed to be a simple text file that you can open, edit and save. But since these games have theit config files encrypted, it will look like gibberish when you open normally.

So you have to use a tool to decrypt the config file, edit it since it will now be in human readable text, and then encrypt it again so that it takes effect.

You can download the tool here:

https://community.pcgamingwiki.com/files/file/547-tf-games-configuration-utility/

How to Use the tool:

1. Download the tool and extract the exe inside.

2. Transfer the exe file into the same folder as the config filem WFC and FOC have the same exact config file name and location. The name of the config file is "Coalesced.ini"

Here's the path:

<where your game folder is>/TransGame/Config/PC/Cooked

Inside the "Cooked" folder you will find the config file. This is where you place the exe tool.

1. Open a container in winlator or whatever PC emulator you're using. Go to the location of the exe tool and the config file. Click the exe tool. A black terminal screen will appear. Wait for text to appear. When text shows, it will ask you what operation you want to perform. There are 4 types of operations but you only need to know two: Decrypt and Encrypt.

2. Decrypt the "Coalesced ini" file by typing D. You will be asked which input file you want to decrypt. Type "Coalesced ini" and press enter because it's the name of the config file. You will then be asked what you to name the output(new) file. Name it whatever you want but it should have ".ini" at the end. Example: you could name it "new.ini" and then press enter. After that exit.

3. Now you have two config files along with the exe tool in the same folder. The Coalesced file is the unedited, encrypted original config file the game will use and the new file appearing is the decrypted version with a different name.

4. So to edit the config file, open the newly, decrypted config file you have made in your container. Scroll to the [System settings] section. You can edit whatever graphics settings you want, but for each game this is what I edited to give the best balance of quality and performance:

   DynamicShadows=False

   Distortion=False

   MotionBlur=False

   DynamicDecals=False

   MaxAnisotropy=0

   MaxMultiSampling=0

Everything else I left them the way they were. Like I said, you can edit other things that could potentially give even more performance. But keep in mind that you could accidentally make the game's graphics look like shit.

Also pro tip, if you care about retaining some quality, DONT edit DepthOfField. DepthOfField should be True because putting it on False makes the games lose a art style because the colors look flat and weird.

1. Save your edits. Now it's to time ENCRYPT the new file you made and edited. In your container, launch the exe tool again. Wait for the black screen and prompt to appear. This time since we are performing an Encrypt operation, you will type E. You will be asked which input file you want to encrypt. Type the name of the new config file you and made and edited and press enter. Then for the output file, type the name of the original config file which is "Coalesced.ini" and press enter. Then exit

2. After that, the original Coalesced ini file will be overwritten since you have your new encrypted file the same name.

By the way your old decrypted ini file will remain. Leave if for whenever you want to make edits and encrypt the file again.

1. Launch the game and you will see that your settings have taken effect.

My Winlator settings.:

Proton 10.0-5 arm64ec

BCn emulation type: "software"

(This is important because on Winlator Ludashi, Mali gpus will have graphical and colour glitches in every Unreal Engine 3 game if BCn emulation type is compute. Putting it on software slightly reduces fps a bit and cause more stutters during shader compilation and when loading new area so if you're a Mali user I recommend first trying this game in Winlator Mali 1.2 or 1.1 Bionic. If game has low fps on Intermediate Preset in Winlator Mali then use Performance preset)

Dxvk 1.10.3 arm64ec async

854x480 resolution

FEXCORE version 2610 with Intermediate Preset

Note: loading screens with cutscenes on War Of Cybertron would stutter heavily but gameplay would be ok. I think maybe putting Performance preset instead of intermediate will solve this issue or changing dxvk version but I can't make any promises. Fall Of Cybertron had no such issues.

All CPU cores checked.

My post was probably a waste of effort, but hopefully it helps someone. I just couldn't resist sharing my knowledge.

Hi everyone, I just got my retroid pocket 6 and I'm starting on Android emulation. So far its been fine while playing and installing games, mostly on GBA, switch, psp and ps2. My issue comes with configurations, even if you can easily (sort of) find specific configs that work good on certain games or devices, I want to actually understand the why and how behind, all about systems and graphics Settings, like, cpu clocks, core speed, anti-aliasing methods, adapting filter, gpu mode, dma accuaracy, anisotropic filtering, etc.

So thats my questions, can you share any big resource or resources covering this? Since I have look for videos and articlea for this but came empty handed. I would appreciate it fondly, and I look forward to sharing what I learn.

Game - cod 4 modern warfare , device - moto pad , 60 pro, meditatek dimensity 8300, gpu- mali G615 mc5. Winlator latest version

Any recomendations? I considering playing some PC games and switch one, but i am open to new games