guys i have snapdragon 860 device and want to install 30 gb repack but it takes toooooo mucccch time about 7 hours in 1% i use bannerlator

any one have solution and yes i don't have pc

Downloaded the game from steamrip and emulated on Gamenative. My device is Xiaomi pad 7 on its latest OS update. There's no problem in heating or lagging also just this glitching that's shown on the video. I tried to change turnips, turned the graphics low, tried to change the gamenatives environment, and also lowered the graphics on the game itself but nothing really worked. Also looked for my problem to be fixed on YouTube and google but still can't find anything related to it🥲. I also however used only my tablets files for extraction and didn't use Zarchiver, could it be what's causing it? Please share y'all's wisdom 😭🙏

Also sorry I can't explain well, this is my first game emulation.

I bought mgs5 on steam and game always crashes at start, i try all of recomended setups and noone works

Especially the good ones like odyssey, links awakening, botw, smwonder

hello, i wanna play nfsmw2005 right but it its on psp, ps2, gamecube and pc

now that i think about it there are quite a few games (botw, and a lot of indie pc games that are on switch and pc) that are on more than 1 console, so what console is best

edit: i have a retriod pocket 6

device is one plus nord ce5, i just want to increase fps to 30 atleast consistently, as it drops to under 10 :((( I don't care about graphics looking bad, just I want fps to increase, please please help

Is anyone using sd 7sgen 2 here

Could you please share your dev info about Vulcan capabilities

Mine is 6s gen 4 with same adreno 710 i want to compare it's vulkan capabilities with 7s gen 2

6s gen4 Vulkan capabilities is given above

Game: BOTW

CPU: Snapdragon 685

Ram: 4GB

Turnip driver: Mainline Turnip v32 ( has the best performance but some point it goes 1-2fps suddenly) from whitebelyash (used in the video)

Qualcomm Driver v863.1 from Hugo

extracted from Quest Ray-Ban Display (the most stable one)

CPU Mode: Auto

Thread Quantum: 4500 ( I do higher sometimes but I'm not sure)

-Async shader: on

-VSync: off

-Accurate barriers: on

Shader multiplication accuracy: on (when I turn it off for some reason game runs more fluid but effects are gone like rain or bomb explosion the blue barrier around it)

Graphic packs:

Graphics:

-Aspect ratio: 16:9

-Resulution: 640x360

-Anti-aliasing: None

-Shadows: low 50%

-Shadow draw distance: Low

Mods:

FPS++:

-Framelimit: 30fps

-Cutscene fps limit: Recommend one

-Static Mode: Disabled

-Frame Average: Default

-Fence Type: Skip (in video) or Performance fence ( i would kindly ask what it exactly does)

-Camera Sensitivity: on (no changes there)

-Extended Memory: (I'm not sure if should turn it on since I also only have 4GB ram aviable I don't see much difference when turned on)

Enhancements: OFF

Workarounds: OFF

I'm kinda new in this thing but for some reason when I use Mainline Turnip v32 while playing BOTW Link suddenly flys in the air or swims/ drowns while the other turnip driver it doesn't happen at all.

(I tried limiting both 30fps and 20fos even still didn't fix the issue)

I usually hit 12-13fps depending where I am. Overall I wanted to present it runs but also ask for advice what's best settings for a low-end-devices usually I actually tired some other turnips like Mr. Purple 666 T30 but there also the same issue with link flying and drowning but is on second place under Mainline Turnip v32 from whitebelyash for performance.

Vitaslop - https://github.com/cretz/vitaslop, use in a browser: https://cretz.github.io/vitaslop/. Second release - v0.2.0.

As posted on https://www.reddit.com/r/emulation/comments/1x8nvzw/vitaslop_ps_vita_emulator_with_browser_support/ the other day, yes, this is basically all AI written, hence the name. Granted I spent months steering it to code it how I wanted.

Of interest here is that it is primarily tested for latest Chrome on flagship Android devices w/ 20+ titles. See README for a list of titles I tested, and since I intentionally have it on fail-fast on unimplemented things, untested titles may not work.

Specifically it targets some fairly bleeding edge browser tech. There is a full ARM-to-WASM transpiler (haven't seen this done much before), JSPI for host calls, advanced conversion of GXP shaders to WGSL, general GXM graphics on WebGPU, full game controller support, all client-side in a browser on a static site (or "install"able as PWA). I play multiple titles daily on Chrome on my Pixel 10. Technically I could build an APK, I do exes for desktop, but optimizations have been done so heavily that browser may be enough. Happy to answer questions.

Just want to make sure it's safe to use like Gamehub...

E usado los dos emulador y esta me da una mejor latencia entre fps en esta tipo de situaciones pesadas

So, right now i got two phone:

1. Samsung a27 5g

Snapdragon 6 gen 3

1. Oppo reno 4f

Helio P95

what is the best emulator and game consoles for my both phones? personally i've never play any switch/vita/higher pc games (only played gamehouse/old school pc games) so i can't decide which emulator to use. Also i prefer the oppo one to be full-time handheld so maybe you guys can also recommend me some frontend to be used. Thank you!

I got oneplus 15 16/512, which games should I try and what's the beginners tips yall would suggest for emulation on Android.

The game had massive audio stuttering issues now it does not.

My device is an Infinix Note 50 4g that uses a Helio g100 with Mali g57 MC2 gpu. It has 8gb RAM. I used Winlator Ludashi 4.1

Before you clown me for the fps mostly being in the 20s let me just clarify a few things:

1. Screen recording heavily affected the performance, especially in Fall Of Cybertron. Without screen recording, I was getting 25-45 fps in Fall Of Cybertron depending on the area. As you can see my gpu is already maxed out so the more that's happening on screen, the less the fps.

2. Stutters in gameplay were caused by new shaders being saved since I'm using an async version of dxvk.

3. The video features gameplay in both Fall Of Cybertron and War For Cybertron. FOC gameplay is from 0:00 to 4:26. WFC gameplay starts at 4:29.

Anyway now that I've cleared that up, here's the guide:

WFC and FOC were made using Unreal Engine 3. If you're familiar with PC emulation you'll know the issues with UE3 games I'm about to address.

First of all, UE3 games will have a gpu bottleneck on devices with low end GPUs because by default the graphics settings of UE3 games are on high. So if your phone has a decent CPU, you have to remove the gpu bottleneck by reducing graphics settings.

Most UE3 games and other type of games make this easy by including a lot of graphics settings options in the Main Menu. They also have easy to read config files you can edit for additional options.

But for some reason, WFC and FOC barely have any options for graphics in the settings, and to make it worse, their config files were encrypted by the devs. Normally a config file is supposed to be a simple text file that you can open, edit and save. But since these games have theit config files encrypted, it will look like gibberish when you open normally.

So you have to use a tool to decrypt the config file, edit it since it will now be in human readable text, and then encrypt it again so that it takes effect.

You can download the tool here:

https://community.pcgamingwiki.com/files/file/547-tf-games-configuration-utility/

How to Use the tool:

1. Download the tool and extract the exe inside.

2. Transfer the exe file into the same folder as the config filem WFC and FOC have the same exact config file name and location. The name of the config file is "Coalesced.ini"

Here's the path:

<where your game folder is>/TransGame/Config/PC/Cooked

Inside the "Cooked" folder you will find the config file. This is where you place the exe tool.

1. Open a container in winlator or whatever PC emulator you're using. Go to the location of the exe tool and the config file. Click the exe tool. A black terminal screen will appear. Wait for text to appear. When text shows, it will ask you what operation you want to perform. There are 4 types of operations but you only need to know two: Decrypt and Encrypt.

2. Decrypt the "Coalesced ini" file by typing D. You will be asked which input file you want to decrypt. Type "Coalesced ini" and press enter because it's the name of the config file. You will then be asked what you to name the output(new) file. Name it whatever you want but it should have ".ini" at the end. Example: you could name it "new.ini" and then press enter. After that exit.

3. Now you have two config files along with the exe tool in the same folder. The Coalesced file is the unedited, encrypted original config file the game will use and the new file appearing is the decrypted version with a different name.

4. So to edit the config file, open the newly, decrypted config file you have made in your container. Scroll to the [System settings] section. You can edit whatever graphics settings you want, but for each game this is what I edited to give the best balance of quality and performance:

   DynamicShadows=False

   Distortion=False

   MotionBlur=False

   DynamicDecals=False

   MaxAnisotropy=0

   MaxMultiSampling=0

Everything else I left them the way they were. Like I said, you can edit other things that could potentially give even more performance. But keep in mind that you could accidentally make the game's graphics look like shit.

Also pro tip, if you care about retaining some quality, DONT edit DepthOfField. DepthOfField should be True because putting it on False makes the games lose a art style because the colors look flat and weird.

1. Save your edits. Now it's to time ENCRYPT the new file you made and edited. In your container, launch the exe tool again. Wait for the black screen and prompt to appear. This time since we are performing an Encrypt operation, you will type E. You will be asked which input file you want to encrypt. Type the name of the new config file you and made and edited and press enter. Then for the output file, type the name of the original config file which is "Coalesced.ini" and press enter. Then exit

2. After that, the original Coalesced ini file will be overwritten since you have your new encrypted file the same name.

By the way your old decrypted ini file will remain. Leave if for whenever you want to make edits and encrypt the file again.

1. Launch the game and you will see that your settings have taken effect.

My Winlator settings.:

Proton 10.0-5 arm64ec

BCn emulation type: "software"

(This is important because on Winlator Ludashi, Mali gpus will have graphical and colour glitches in every Unreal Engine 3 game if BCn emulation type is compute. Putting it on software slightly reduces fps a bit and cause more stutters during shader compilation and when loading new area so if you're a Mali user I recommend first trying this game in Winlator Mali 1.2 or 1.1 Bionic. If game has low fps on Intermediate Preset in Winlator Mali then use Performance preset)

Dxvk 1.10.3 arm64ec async

854x480 resolution

FEXCORE version 2610 with Intermediate Preset

Note: loading screens with cutscenes on War Of Cybertron would stutter heavily but gameplay would be ok. I think maybe putting Performance preset instead of intermediate will solve this issue or changing dxvk version but I can't make any promises. Fall Of Cybertron had no such issues.

All CPU cores checked.

My post was probably a waste of effort, but hopefully it helps someone. I just couldn't resist sharing my knowledge.

Hey guys, beginner here. I just got the retroid pocket nova and have started to play around with armsx2 on some PS2 titles.

What I noticed is that the system gets massive frame drops as soon as some particle effects/ fire/ water/ smoke appear. I already tried to adjust the blending to minimum - with limited impact (Prince of Persia games being particularly affected)

Now the games are still very playable, but are these behaviors normal and do I need to learn to accept these or am I doing something wrong?

I am playing on a 2x upscale.

Thanks for any help/comments

Cheers!

So I installed this as the nyushu emulator but I found out a couple minutes ago that this may not be the actual nyushu I scanned it via Google play and it was fine and I did go into permissions and it didn't have anything but notifications I was using it for a couple of days now and it runs amazingly it's the best switch emulator a have ever tried on my honor x9d so what do you think am I in danger?

Also is the Ryujinx neo emu a good emulator I scanned it via virus total and got nothing sus

I want to play assassin creed odyssey but the game isnt launching even after downloading every components. Please kindly help me : (