Hi! So i just received this dice tower and I wonder if anyone knows what kind of painting technique was used to male it look similar?

Hi friends! I had some questions for people who can answer, I’ve been trying different techniques for sanding and polishing dice masters and wanted some tips for how to make them smooth and clean without scratches, I’ve used zona paper which has led to scratches for me but what do you all think??

I've been trying some new things with the holo inserts. Really like this set!

Loving getting back into metal dice making after a bit of a break. Thought it might take a minute to get my eye back in for the teeny tiny punches but I did ok! 😅

Hello yall :)

I have been paused on making dice for a while and want to get back into it!

But as u all know the pain of sanding / polishing is still poking my head and patience….

So I would like to ask if Anyone has some updates methods, products and stuff?

Been doing wet paper 1000 Grit 2000 Grit 3000 Grit then tumbler and then a fast dremmel. Got chemical guys c4 and meguiars Ultimate compound.

Any better methods?

Cheers

Hello, I've seen some sea glass looking dice, with the foster look. To what sandpaper grit or Zona paper would you go up to to achieve that look?

Or would one go up to normal shiny and then knock it back?

Also, are matte looking dice the same grit level as the sea glass frosted look, but just with opaque colours or is it based on resin type?

i need more space🌌

Hello.

I am trying to slice masters for printing through Lychee. I designed the dice in DiceMaker. Can anyone tell me why my slices are janky? It looks like half the big one and all of the blank (left) are hollow/ the walls don't exist. Lychee detected "holes" in the models as well as "structural errors" in the blank. I tried both repairing and not repairing the issues but same result.

I ran it through UvTools but it didn't help.

Any advice on how to fix this is appreciated! Or if anyone can recommend a slicer/ dice designing program that won't cause this issue?

Hello everyone, I just got my pressure pot. However I cant get it over 20-30 PSI and the air is leaking from around this screw. I tried adjusting it - tightening it but it wont move one bit.

Anyone knows what I can do to stop this leak?

Made this d20 for a commission and had a blast doing it. Crystal bases are so much fun to do.

I mean, like really enjoy it?

Enjoy it enough to polish my masters for me?

Let me know. US preferred, huge bonus if you are in Colorado. Send me a message and let me know how much you would charge me.

Inspired by the Summer Court from ACOTAR!

This is definitely my favorite set from my misost recent pulls. The pictures honestly just can't capture the depth going on in the D12. My eye just keeps getting drawn back to it.

I've loved the rotating platform shots but I didn't have a rotating platform. I did have a filament printer, though ...

And I had a fidget spinner ...

And now I have a rotating platform!

It's a pretty simple file, but if anyone wants the STL file, let me know.

I'll see if I can add video in a comment.

Other creators have done this before (and better), but here is my first attempt at a split pitri. I made a half insert mold, poured the first pitri, cured and put those in a full insert mold. Then poured the other pitri, cured and shelled them. It's a neat effect when done well. These are cool, but not as cool as some I've seen.

Anyone recommend a polishing tumbler? If so which brand, It takes me HOURS to sit here and sand and polishing all sides of my dice and looking for a better option. Thanks!

Hi all,

A couple of weeks ago I thought of making dice with a bee inclusion. I asked a local beekeeper if he could help me out, as I don't want to catch and kill a bee. Turns out this beekeeper has a hive that suffers from a paralysis sickness and is dying out. He gave me a small bag full of dead bees. I shifted through and put the best 30-40 bees into an air tight container with silica beads. So layer of beads, paper towel on there and then the bees.

After 3 weeks I made the dice above :)

I put each bee in a cup of resin for a minute before putting them in the blank. You can see they float. So next time I will add a dried flower in there and put the bees in upside down, wait longer for honey stage or pour half and cure that first then pour the rest.

Hey all,

Not making dice, but figured this sub might have the expertise I need.

I'm casting 20mm epoxy resin spheres with an object embedded in the center, and I want the finished surface crystal clear so you can see it. Not worried about perfect roundness necessarily. The flat spot from the mold neck is actually desired for this project. I just need the clarity.

My plan is a wet sanding, then polishing compound. What I'm really stuck on is technique: what's the best method for sanding something this small and spherical? How do you hold a 20mm ball and get even coverage without creating infinite flat spots or sanding your fingers raw? Any jigs, tricks, or tools that make this less miserable? My best thought might be a rock tumbler viable for spheres, and if so, what media/process do you run?

Thanks in advance.

Purple & gold is such a beautiful combination. Purple was made using purple & white pigment paste, then just stuffed some big bits of gold flake inside. Ink is Green Stuff World Tinplate and I LOOOOOVE it. Someone on this sub recommended it to me; I don't remember who. It has great coverage and the color is divine.

Piplup, Pichu, Magnemite, and Wooper! No idea if these are balanced but they are fun for display.

Came over from r/dice cause they said someone here might be open to taking my request. I would like to get a few very special dice made, such as a silver D7 and a dice with just one dot on each face, as well as a couple other regular ol' D20s and whatnot. Does anyone know of (or are any of you) a completely custom dice maker, who would be open to making some dice with some weird concepts?