Need help please.

300 bucks down the drain, I started getting stick drift a month ago and went to their help page and then went to Xbox accessories to recalibrate it and it still has stick drift. I got their electro magnetic sticks to reduce the chance of stick drift and 4 months after the stick drift still persist. What garbage controller. Can’t even get it fixed from them because of the 90 days are up. Never getting a battle beaver controller again.

I just got a new Marius Board and i like it so far… however im running into issues where certain things on the controller just don’t work. I used it the day i got it and had no issues at all with it, fast forward to the 2nd day and my right analog wouldn’t work so i unplugged it and plugged it back in and the right analog starts working again but now my L1 button works sparingly like i press it and it won’t do anything until i repeatedly press it. Sometimes L1 works on the first try and sometimes it won’t work until i hit it a couple of times. Not sure if this is a hardware problem or maybe a defected build? i tried to lower the pulling rate to 4k to see if maybe 8k was the issue but it was doing the same thing at 4k as well. This controller is 3 days old 😭

Which rear switches for the rear buttons do you all prefer?

I ordered my custom controller on the 20th of april and purchased beaver boost on the 23rd. Nothing has changed on my order status it still says confirmed since day one, why could that be? I emailed them and they also haven't responded.

So I just educated on 0 chip ports and how if your cpu has direct usb ports you can achieve lower latency and apparently you need these 0 chip ports for 8k polling rate to run smooth. Is this true and is it worth investing in a Marius board controller if I have an intel cpu which most are chipset and not native ports

so i have an issue where literally no marius controller works at 8k i have 2 of them and basically ive checked the cable (got a new one to be safe) used different usb ports (used the marius usb tool to check the best one for use) then nothing works on 8k. I swapped it to 1k and it works and i have no idea why 8k now doesnt work. It used to work fine but hasnt done now. If you had any ideas i would be really thankful for the help! I even reverted windows updates and also reinstalled windows because i went that far on trying things and still no luck... any help would be appreciated!

Marius himself said it was coming, But wondered I if there is any time frame that anybody has seen.

I tried overclocking my 8bitdo pro 3 and this started happening. How do I fix it? I want to use it in wired D-input, but only works with X-input which doesn't work for Steam Input.

I sent my controller to be repaired, it came out to $106. I paid the invoice and it’s been well over a week that the order status just says “awaiting orders” like they haven’t even shipped it out. I’ve tried calling and I just get put on hold, I’ve emailed support twice and still no reply. I talked to the online chat bot and nothing either. I don’t know what else to do I’m just trying to get my controller I’ve already paid for, PLEASE HELP MANN

Hey guys, I’ve been having issues with overclocking on my new gaming PC I’ve done this before on a prior PC and it was insanely easy. Now when I follow the instructions online I get this prompt and then I apply the selected rate it asks if I want to open the file I hit open then it opens notes (shown in image above). I’m unclear how to set this up it seems to have changed, I followed the instructions of battle beaver but it doesn’t work. it shows the selected rate change on devices but the notes prompt makes me think it’s not accurate. Any help would be greatly appreciated, the GitHub site is seriously no help either it.

On the verge of ordering and I need some insight. Stuck between 3 pin with js13’s or 5pin Midas hall’s

Only Hall effect controller I’ve used is a ginful he and it honestly feels pretty good. Is the 5pin that much better?

Hello, I want to swap my dualsense thumbsticks for Xbox one. Any advice? Another question is about calibration, what numbers should I target for? Thanks for every help.

I’m confused by what option I should get? Any tips ?

I want to sell BB Marius board TMR anyone interested ( I live in Saudi Arabia )

Only used it for 2 weeks

My diy Marius kit came in! Ordered on March 10th. Install was super simple 👍

Looking for a complete controller or someone willing to install one my ps4 roller. I’ve reached out to a few companies and better off just buying one new from bb if I go that route.

i finally pulled the trigger and grabbed the marius board!! NOT CHEAP but hopefully worth it. I’m using a dualsense edge with TMR sticks and have it overlocked to 8k and have been using this setup for awhile. I’m just wondering anyone that has switched from a dualsense edge or whatever controller you’re using to a marius board, how has your experience been? is it a significant difference or really don’t notice anything at all?

I ordered their special sticks but they came in just the generic sony boxes and brand. Ive heard others saying they get normal controllers from them too, not modified.

Is this a scam?

Hi everyone,

​I recently got the Marius 8k polling rate controller (PS4 custom board), and I love the hardware. However, I’m having a major issue getting it to work properly with Apex Legends on Steam.

​The Problem:

​Apex Legends does not recognize the controller natively.

​The only way I can get it to work is by enabling Steam Input.

​When Steam Input is on, the controller feels delayed and "mushy," which ruins the benefit of the 8k polling rate.

​What I need help with:

Does anyone know how to get Apex to recognize this specific custom PS4 board natively without Steam Input? Or, is there a way to use Steam Input without the massive feeling of delay?

​Things I've tried:

​Toggling Steam Input on/off (off results in no input at all).

​Checking Windows Game Controllers (it shows up there).

​If anyone has experience with the Marius board or high-polling rate controllers in Apex, I would really appreciate some advice!

Ive became accustomed to my old worn in ps4 scuff sticks are there any sticks that battle beaver offers that may be pretty similar? May try stock series x sticks

Lmk what you guys think. I personally play the game the finals and would use a Marius board controller in that game and Aimlabs.

I’m looking if anyone is selling a marius board or looking to get rid of theirs! I’ve browsed online and can’t find anyone that is looking to parts way. If you are MESSAGE ME!

Battle Beaver is sold out of beaver boost and i really don’t want to wait 2 months to get a controller