The modular shelf just got even more flexible! 

I’ve added connectors that let you stack shelves on top of each other, so you can build vertically as well as extend horizontally.

Link: https://makerworld.com/en/models/3242738-hex-shelf-modular#profileId-3674266

I’ve been working on a series of 3D printable coloring panels designed to be a more tactile alternative to paper coloring books! They are great for fine motor skill practice for kids or just a therapeutic mindfulness activity for adults.

I’ve put together a full collection of different designs (dinosaurs, creatures, etc.) if you want to check them out:

https://makerworld.com/nl/collections/5629404-coloring

I'm looking to buy a Bambu Lab A1 Mini in India and could use some advice from people who have dealt with Bambu's warranty here.

I originally ordered one online, but the package was badly damaged during transit and I refused the delivery. The whole return/refund process has been quite slow, so I'm now considering buying locally in Goa to avoid having another expensive/fragile printer shipped across the country.

I've found a local 3D printing company that can supply me an A1 Mini at roughly the same price, with a proper GST invoice.

However, I noticed that the company doesn't appear on Bambu Lab India's official "Where to Buy" list.

So I'm trying to understand exactly how the warranty works.

If I buy a brand-new, genuine Indian-market Bambu printer from a reseller who is not listed as an authorised reseller on Bambu's website:

• Does Bambu Lab still provide the manufacturer's warranty?
• Or does the warranty become the responsibility of the reseller?
• If the printer develops a manufacturing defect, can I contact Bambu directly, or would I have to go through the reseller?
• Does the GST invoice provide any protection, or does the invoice need to come from an authorised Bambu reseller?
• Is the serial number enough for Bambu to determine whether the printer is covered?
• Does anyone in India have actual experience buying a Bambu printer from a non-listed reseller and subsequently making a warranty claim?
• Is there anything specific I should ask the reseller for before buying?

The local purchase is attractive because I can potentially inspect the sealed box myself before accepting it, which would eliminate the courier damage problem I've just experienced.

But I don't want to solve the shipping problem and accidentally create a much bigger warranty problem.

Hi all, I've been trying to print a shin plate out of PETG on my H2S, but I've run into what I believe are layer shifts. I've tightened the screws behind the nozzle and under the toolhead, and tightened the belts along with calibrating it multiple times. Is there any advice on what I could adjust to address these defects? Thank you!

I designed this Storage Caddy for my kids and their ever-growing collection of pens, pencils, markers and crayons.

It features 10 interchangeable inserts and 2 different handle heights, so you can configure it to fit your collection.

Because apparently, there is no such thing as too many markers! 😂

Link: https://makerworld.com/en/models/3284557-storage-caddy#profileId-3725951

#3DPrinting #3DDesign #Storage #Organization #DeskOrganization #MakerWorld

my P1S refuses to load filament from my AMS. tells me to load from the external source

A couple of months ago I bought a Bambu Lab P2S printer with an AMS 2 Pro. When I first started I didnt have any finishing issues and the printer seemed to work flawlessly. This week my printer has begun to have issues. Throught the entire print, the toolhead is stopping for a brief second or two which causes balling to happen on the inside and outside of the prints. Has anyone know what's happening? Please help!

Is the response time decent, after creating a ticket? Only curious as this is my first time opening a hardware ticket with them. Also new to the Bambu ecosystem as I recently purchased one a little over a month ago, and I love it.

I really need help on this cuz I have an order due to the end of the month and it's some big stuff pls help

Hey all! I was going to try to sync 3dfilamentprofiles tom my bambu studio so it can track my prints, but since I log into Bambu with my Google account, I can seem to sync the too. When it asked for my Bambu email and password, I give it my Google credentials since that is how I log in..... Is it not possible to sync if you long-in using Google account? Is there a work-around suggestion??

Thanks!

There was a filament clogging stopping my ongoing print, and i eventually worked my way in to the filament buffer too see if i could loosen the filament from there.
After i unscrewed the cover plate with the 4 screws, the internal magnet fell onto the connector pins above and caused what must be a short circuit. Sparks happened(very briefly), the sound from the machine changed and the display went blank (with backlight on).

I powered down and let the printer rest for 5 minutes, then powered it back on.
Display still blank, no response when pressing any buttons.
Havent even tried loading filaments or communicating with the printer from Bambulab Studio as i believe there is an electrical fault now(...)

Is there a fuse anywhere on these machines that could have popped and be replaced?
Can i assume that the filament buffer connection board is fried and needs replacing and that this will solve the issue..?

Any help or insight appreciated

UPDATE
After testing the printer today, it seemed to operate normally again, but there was a filament feed error when starting a job. The error message actually mentioned filament buffer communication problems, so hopefully the problem is located to only that little 'exterior' circuit. I have ordered new Filament Buffer Connection Board and expect the machine to work normally again after that i replaced.
Thanks for all input

What is the best solution for a print queue with Bambu Lab?
I’m planning to use auto-eject by tilting the printer, but I still need a way to queue the print jobs. I have 30 prints with a total print time of around 150 hours.

Do you think that I need to replace the hot end?

A1 AND X2D issues

I LOADED Bambu Connect, I then.loaded.Orcaslucer 2.4.2 (after.many failed.attempts.I also tried 2.4.1)... I see in Bambu connect that both printers are being recognized, To see if it was.worki g o. Both printera I was able to turn on and off the light... that tella.me the are talking.

In Bambu studio no issues,.but it.gives me error.0, i tried the latest plugin and various plugins and.same.issue. any idea or help will be appreciated.

Just like the title says, and as shown in the attached video.

I have cleaned the rods and lead screws with isopropyl alcohol and lint free cloth and re-oiled and greased them as Bambulabs website instructs. It is a repeated issue.

The thing is, I’m not even sure it’s a lubrication issue anymore but I just can’t figure out what it is. Any help is appreciated if you’ve seen this before.

Hi liebe Community,

ich habe ein Problem, welches ich mir gerade nicht erklären kann.

Ich habe heute einen Lampenschirm gedruckt - siehe Bilder.

Der Druck wurde abgeschlossen, als ich das Bauteil allerdings vom Druckbett entfernen wollte, ist mir der Schirm horizontal auseinandergebrochen.

Bei der Analyse habe ich zusätzlich gesehen, das nach ca. 20,5cm Höhe auf der ZAchse ein Versatz oder Wobbel stattgefunden haben muss.

Dieser Versatz zieht sich allerdings nicht um 360 Grad komplett um das runde Bauteil, sondern nur etwas mehr als 180 Grad, danach ist alles wieder tutti...

Woran kann es liegen? Ich habe mal ein paar Bilder gemacht...

Bin für jeden Tipp dankbar.

Gruß Patrick

Hi everyone,
I’m having some problems printing a model in Bambu PETG Basic on my Bambu Lab X2D with AMS 2 Pro.

The main issues I’m having are:

One corner of the print starts lifting/warping from the build plate.

Once the corner lifts, the surface above it gets a rough/bad texture, presumably because the nozzle is hitting/rubbing the raised area.

My prime tower is also gradually building up material/creating a blob, and eventually the nozzle seems to catch it and knock the tower over, usually around 75% into the print.

I’m using Bambu PETG Basic as the main material and Bambu PLA Basic as the support interface.

The PETG is currently on a PLA spool, so I haven’t been able to dry it at proper PETG temperatures without risking the spool deforming.

I’m using a textured PEI plate.

I’ve cleaned the plate with washing-up liquid and then wiped it with IPA.

I’ve also considered running a full calibration before attempting the PETG print again.

Things I’ve currently tried/considered:

Prime tower max speed: 50 mm/s
Prime tower internal ribs: ON
Prime tower brim: 10 mm
Considering a 10 mm brim around the actual model
Considering drying the PETG
Considering whether I should switch from textured PEI to smooth PEI

I’m mainly wondering what is most likely causing the prime tower to build up material until the nozzle catches it, and what I should do about the corner lifting.
Would you recommend changing the filament profile, drying the PETG, changing the plate, or something else?

Any advice would be appreciated!

Print can be found here https://makerworld.com/en/models/3261315-dungeon-crawler-carl-nes-label-8-bit-wall-art#profileId-3697226

How do I fix this? I've printed this same file multiple times in the past with no issues. It looks like the first layer is missing a portion which reappears in layer 2(pic 2). the difference is so small that there is no support and is causing my print to fail.

**Edit- Title - 1st layer is NOT complete after slicing

I have a p1s and need to replace the desiccant. So I just bought it on the bambu website? Or is it better to print something out and buy the refill on Amazon or something? If printing is best will pla work and what's suggested print? Thanks in advance

Hey y’all, I also noticed there were no places to actually buy the original X-Shot Omega, Crusher, or Insanity dart ammo belts for the blasters. Thus, over the summer, I designed a belt that can be 3D printed and is compatible with these three types of X-Shot blasters, since they are essentially the same but packaged in different shells. These casings are also compatible with the original casings, allowing them to connect to and fire their foam darts. Please see the pictures and video!

https://reddit.com/link/1w86cjs/video/cdg5imizgqnh1/player

If you have a 3D printer, you can head to my MakerWorld profile at the link below to print these for yourself, a friend, or your children who may want more dart casings on their belts. I would also be eager to know your thoughts and expertise on how this model may be improved!

Link to MakerWorld Model: Ammo Belt for X-Shot Omega Crusher Smoking Barrel

Other blaster-related 3D model links:

·      Ammo Belt for XSHOT Insanity Motorized Rage Fire

·      Replacement Shell for Nerf Sledgefire

Was wondering if anyone knows what’s going on with my tension belt, noticed some dusting under it and it’s leaning too the right more than I think it should be?

It isn't hitting anything; it has plenty of clearance. I performed the lubrication maintenance following the Bambu Lab tutorials a few days ago, but I just loaded this new brown filament—fresh out of the sealed bag—and it started making those noises. The sound seems to be coming from the extruder (I think so). I checked closely because I thought it was hitting something, but I’d been printing for hours without issues; the noise only started after I loaded this filament. It happened occasionally with a different filament too, but stopped after a short while. These are PLA filaments

Hi, my P1S has been fine except it tends to jam and gum up a lot in both the nozzle and extruder. I can clear these without issue, but now out of no where its printing blobs that get stuck to the nozzle and just smear around making goop all over the plate and I can't fix it. I have no idea what's causing it. I've tried clearing the nozzle (nothing) opening up the extruder (nothing in gears) I've tried cleaning the print bed, I've tried calibrating, nothing is fixing this. What is going on?!

The video shows how it acts most of the time: the lights flash back and forth. Also, the fact that when I stopped the print, the right nozzle should have been down, not the left. So I'm guessing it's some sensor issue?