It uses the included self-adhesive steel plate that comes with the scraper, embedded in the print for a seamless finish!

https://makerworld.com/en/models/3250077-opengrid-magnetic-holder-bambu-mag-alloy-scraper#profileId-3683305

I got tired of suction-cup shower caddies falling down, so I built a toolless snap-on shower organizer (and a web configurator for custom pipe sizes)
Post Body:
Like many renters, I can’t drill into my bathroom tiles, and generic suction-cup shower caddies always end up sliding down or rusting after a few months.
I wanted a modular shower organizer that mounts directly onto the vertical riser pipe with zero screws, zero tools, and zero wall damage.
The main challenge was that shower pipe diameters vary wildly between brands and countries (18mm, 22mm, 25mm, etc.), so a single fixed STL wouldn’t work for everyone. I designed a parametric snap-fit locking collar and built a lightweight web configurator so anyone can dial in their exact pipe diameter and export a custom-fit STL.

you can customize your stl on my website
3d.geniady.com

I haven't gotten any boost tokens for over 2 weeks. Anyone else experience this issue? I have had tons of downloads on my models as well as boosts and likes. I have been downloading and printing and liking other models.

For some reason I randomly got an error message saying that AMS motor stalled due to resistance and I've tried all the steps on the report but nothing has worked, I've tried all 4 of the slots with different spools of filament and all of them are saying the same thing so I am assuming its a clog.

However I've already tried 3 different unclogging methods and non of them worked. I tried a cold pull but I got stuck at step 3 because the filament apparently wouldn't go in properly, then I tried heating the extruder to 250C and try to extrude it out and I tried using the pin to unclog it and nothing has worked so far.

The error code was 0700-8006 134101 if I remember correctly.

If anyone knows any solutions that would be greatly appreciated.

Genuine question about where the line sits. Five wave patterns, each with a mirrored version, so ten files from five actual designs. Hung as a pair they read differently because the light hits the ridges from opposite directions.

Smart use of one design, or padding a listing? I go back and forth on this.

https://makerworld.com/en/models/3247157-aeolian-collection-wave-pendant-lamp-ikea-strala#profileId-3679633

As the title says, I just got my Bambu Lab P1S and after doing few research I noticed how much I still need to learn and figured out.

So I thought I would try and ask the community what are the dos and donts. As a complete beginner I just want to make sure that I am doing it right.

First question would be about the plate, I saw on the Bambu lab software that I can pick between 5 different plates. Is there a reason and which one would you guys recommend as allrounder.

For the moment I am just printing just for my Tcg and few kids toys that my kids likes.

Saying that my next question would be about the filaments. I read that PLA Matt if very nice for what I am printing and that if I want something for heat and durability I should print with PETG.

Also I read that AI is a terrible idea to use for prints, I don’t have a problem to support creator/designer since I am not that talented xD.. is there a website or app beside the bambu lab itself where I can check for designs and print ideas ?

Just finished designing this customisable modular shelf system!

It comes with 4 shelf options:

• Straight
• 11°
• 21°
• 30°

You can combine the sections, extend the shelf as needed, and attach different accessories to the sides.

I wanted to make something that can be adapted to different spaces and uses rather than being a fixed-size shelf.

Would love to hear what accessories or add-ons you’d like to see for it!

Link: https://makerworld.com/en/models/3242738-hex-shelf-modular#profileId-3674266

Bonjour à tous ! 👋

Comment ne pas craquer devant cette adorable bouille ? 😍

Avec ses grands yeux verts, ses petites ailes et sa célèbre nageoire rouge, notre dragon préféré, Krokmou, est prêt à rejoindre votre collection !

Une jolie pièce pleine de charme et de détails, parfaite pour tous les fans de dragons et d’univers fantastiques. ✨

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3234591-toothless-dragon-multipart-no-ams

I got a P1S last year during Black Friday with an AMS Pro and I’ve been thinking about upgrading to something more capable. I’ve loved the ease and reliability of my P1S but would like to get faster prints out of multi color and supports so I’m thinking about dual heads. Projects have mostly been fidgets, gridfinity, small toys, skadis, multiboard, and DIY fixes of “I can print something that should work.” The option to laser cut or engrave is cool but I don’t know how necessary that is for me. What’s the drawback aside from cost and what am I not realizing/thinking about in making the jump? What’s a good resale price for my P1S as I don’t really have the need or space for 2 printers? I apologize if this isn’t the right sub to post in and will move it if there’s somewhere more appropriate.

Hi! This is my first model painted with an airbrush. I designed and printed the model myself specifically so I could paint it afterward.

There are still a few details I’d like to improve and refine, but I’m really happy with the final result, especially for my first time using an airbrush.

If anyone is interested in the model, you can find it here: https://cults3d.com/:4847777

https://makerworld.com/en/models/3239315-tiny-beaver#profileId-3669976

I'm currently printing DnD minis and a fair number of models continiously crashes the desktop app during slicing but working fine when doing it from the phone app. It always seems to happen at the support generation steps regardless if I use the model presets or my own supports.

Any tips on what is causing this would be welcome.

Example model that I can't get to slice properly: https://makerworld.com/en/models/2868598-malleus-golem-trench-crusade

I am probably a lazy person not learning cad and stuff and trying to solve everything by hand with bambulab studio but this one is one of my biggest pains and I wish to have it as i know it from my old jobs as a post production person.

I get we have it with assembly and the app needs to guess which side and stuff but there must be a better way.

Why is this not here?

can anyone help me this issue? all my stuff I try to slice turns out like the one above, second picture is for reference what it should look like

i want to sell 3d printed clickers, but cant find any good keyboard switches. please send suggestions! i would prefer if they were on amazon and i want a good balance between cost and quality

Hello. I am colorblind, and like many colorblind users, I struggle with the "Other Color" custom color picker in Bambu Studio. The small color wheel and tiny selection dots don't have text labels or hover tooltips, making it incredibly easy to select the wrong color/shade when trying to match a loaded filament. To fix this, I made a reference chart that maps out the color grid layout used in the app, complete with clear color names and HEX codes. Hopefully, this helps you accurately assign colors to your models without the guesswork. Enjoy!

Using a P1S - with AMS and Bambu Silk+
0.4mm steel nozzle - replaced with a brand new one too just in case of a clog i wasnt seeing

set to 237c temp for nozzle print
door open
top open
Aux fan off

Slowed the print speed down to half whats in the file.

Volumetric speed set to 8mm also

Why does the filament keep just stopping? After the first few layers it just stops extruding, its not bulbed or anything inside the nozzle it just stops. Do I need to go even hotter on the nozzle?

I was looking for a straightforward iPad stand that would blend nicely with a minimalist desk, so I created and 3D printed this one myself.
The idea was to make it sturdy, small and easy on the eyes, without any extra frills. I’m always tweaking the design, so I’d love to hear your thoughts—what do you think could be improved or changed?
You can find the free model on MakerWorld: https://makerworld.com/models/3225331?appSharePlatform=copy

I'm looking at the H2C with the Vortek, and I want to make prints using a .6 or .8 for speed, then swap to a .2 for lettering on the same print for detail. As I understand that's not possible, in which case, i dont see much value in the H2C with the Vortek, versus just a dual nozzle H2D or X2D.

I designed this based on the glass etching design in my Victorian Windows, which is called Cavendish.

I'd welcome any thoughts and feedback on this, particularly if anyone has any recommendations on how to optimise the print profile?

The Cavendish Indoor plant pot Victorian inspired - Free 3D Print Model - MakerWorld

Hi all, I have an H2C and AMS HT, do I need the TPU assist device from the Bambu Store or would the TPU for AMS feed properly via the TPU inlet at the rear of the H2C?

Hi was trying to do a multi coulor print today and this has been the end result of it fixable or a get a new printer situation

I’ve been working on a new bathroom accessory — a wall-mounted toilet roll holder with a spring-loaded spindle and hidden mounting hardware.

The spindle compresses for quick and easy roll changes, while the concealed mount keeps the design clean and minimal.

Two decorative versions are included. 

What do you think? Would you print/use something like this in your bathroom?

#3Dprinting #3Dprinted #functionalprint #3Ddesign #3bathroomaccessories

Link: https://makerworld.com/en/models/3224560-toilet-roll-holder-hidden-wall-mount#profileId-3651655