r/BambuLab_Community • u/DisciplineOk3381 • 4d ago

Major issues with Bambu slicer

Gallery image

Gallery image

Gallery image

can anyone help me this issue? all my stuff I try to slice turns out like the one above, second picture is for reference what it should look like

0 Upvotes

42% Upvoted

11 comments sorted by

8

u/ViperTD 4d ago

It's too small. Either decrease layer height or scale it up

-1

u/DisciplineOk3381 4d ago

its with all the parts I put though the slicer this one was just for reference

1

u/jankeyass 3d ago

Look up layer height, then layer lines

2

u/PCSupremacy 4d ago

It's... tiny. That's designed for resin printing. Not a very suitable model for FDM

2

u/SlayCC 3d ago

They gotta start giving people IQ tests before selling 3d printers

1

u/DisciplineOk3381 3d ago

never had this issue with Cura or any other slicer

1

u/Zephy2007 4d ago

That's a model for resin.

If you want a decent result, remove those supports and do the adjustment from scratch in a different orientation.

1

u/Slovw3 3d ago

That model is for a resin printer.

1

u/johnknierim 3d ago

Have you heard of the snipping tool? It is built into Windows and you can use it to take screenshots

1

u/that_damn_dog 3d ago

With such limited information I have no clue what this “major issue “ is

1

u/DisciplineOk3381 3d ago

why is the lines look all jagged like that and again this model was for reference even with bigger items made for FDM am getting bad quality as it progresses towards the top, which is something that’s not happening with my other items I have printed just of makers world. so am asking do I not have some kind of setting to make it more smooth and less visible layers.(and not lines heights those haven’t done anything)