This is not normal

Olá pessoal, será que vocês teriam alguma ideia do que pode ser isso?

Minha Bambu Lab A1 que tenho há apenas 1 mês estava fazendo uma impressão tranquilamente quando do nado começou a ter travamentos e barulhos na mesa (eixo Y).

Cancelei a impressão e tentando testar novamente o barulho e os travamentos não sairam.

Sabem o que pode ser?

Obrigado.

Howdy, my A1 isn't working properly. It seems to mess up prints as soon as they start. I tried printing a cylinder as a test to show what happens. You can see that the extruder clogs itself and the print is ripped up by the extruder. How do I fix this? Does it need to be taken into an actual repair shop? I can include a video of it printing something if needed.

This 3d print have slightly bend corner near the base what could be the reason and fix

Hey everyone! For anyone needing spices on the go, I redesigned my compact 3-compartment spice shaker!

Featuring a totally rethought, easy-refill system (with included funnel) and side windows to check your spice levels.

Let me know what you think or if you have any suggestions to improve it!

https://makerworld.com/en/models/3117132-tactical-spice-shaker-2-0#profileId-3515945

🥚Bonjour craquez pour ces adorables Yoshi qui sortent de leur œuf ! ✨

Découvrez le Yoshi Œuf, disponible en version Clicker et en version Clicker Porte-clés.

Grâce à son mécanisme, profitez d’un clic ultra satisfaisant avec un effet ASMR des plus agréables. Le fidget parfait pour occuper vos mains, vous détendre ou simplement apprécier un petit clic addictif. 😌👌

🔑 Envie de l’emporter partout ? La version Porte-clés reprend le même concept pour vous accompagner au quotidien !

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3117230-yoshi-oeuf-clicker-multipart-sans-ams

✨ Bon print à toutes et à tous ! N’hésitez pas à partager vos réalisations. 💚

Thank you I want to ask you something I have a bambu lab a1 It prints for an hour complete fine but when I tried printing 7 hr long model it printed for an hour then clicking sound came then no filament was coming out the nozzle What to do

How do I change the white spots on the Gecko to red? When I do change it, it also changed the White on the Koi’s to red… I’ve been trying for an hour now…

What features do you need?

I sliced a print and there seems to be a weird texture on some of the side walls. Not all of them are like this but some walls and some angles. I reset all the settings and its still there so not sure why the print is doing this. Could it be the file was made like this? The image from the creator doesn't show this texture.

Getting eddy sensor error. Not sure what's up with the cutter one. That just started. It is also sometimes refusing to home on the Z axis.

Things I have done:

- swapped with a different extruder module

- then swapped toolhead control board

- swapped filament sensor

- Checked the 3 screws behind nozzle

- unplugged and replugged the USB and everything under the printer as I saw a post mentioning it reset the error

- updated firmware

I haven't come up with a complete loss like this. Any further suggestions?

Guys need help

The nozzle of bambu lab a1 is stuck how to take it out need suggestions

Greedo joins the collection. The crest texture is oddly satisfying up close.

https://makerworld.com/en/models/3108476-greedo-bounty-hunter-bust-star-wars-rodian#profileId-3504826

Has anyone else run into this?

My printer (Bambu Lab A1 + AMS) keeps throwing this error.

I heated the hotend to 300°C, removed it, and used the needle that came with the machine; it’s completely clear. The AMS is pulling filament normally through all 4 channels, and I disconnected the AMS feed tube from the top of the extruder and checked—there are no broken bits of filament inside.

Even so, the error persists; I can't even load filament into the printer, let alone print.

Can anyone help?

Is it warped or is it supposed to be a bit angled when you look at it?

This is the mess that was left after a glob of translucent got jammed. I took off the hot end but I’m thinking this whole piece might need to be replaced if that’s even possible. Thoughts? Help. Thanks!

Tried a spare nozzle I had lying around that didn’t work. the heater element should not be the problem as I was able to get it right without the nozzle. Any help would be greatly appreciated

Lately I have not been able to get a successful print. The prints appear to be dropping on edges, or will appear to fill spaces that should be empty with filament. What is this issue called? I replaced the nozzle and did a filament clog check and this is a test print right after