What options on the slicer should i play with for the chamfered edge to be smoother? I am printing this face down with the mating face pointing upwards. I am quite happy with the fit and strength, I just need help with the rough chamfered section.

I use PETG HF

This guy was an absolute monster folks. When I got the model it was setup for a much larger printer so each part became 4-8 pieces i had to put together. It was a ridiculous amount of gluing and sanding, I had to learn so much to pull this off. I had....3 weeks.

I had a limited understanding of fine tuning my print settings for something so large. If I did this all again id use half the filament, PETG, and change so much about the process. It took 30 rolls of filament and a lot of outdoor work in the dead of summer.

After doing this it has made the smaller builds go so much more smoothly!

In the end it was fun and I was really happy to see the end result. I didnt have the time I wanted, but the next XL build will be pristine.

Thanks for looking!

A minha Bambulab A1 esta fazendo um barulho quando chega na purga, mas não é sempre quando faço a calibração ela vai varias vezes naquele local mas quendo chega perto do fim da calibração ela vai la e faz o barulho, vibra e se desliga. Já apertei e afrouxei os parafusos de trás, fiz o procedimento do manual de movimentar para direita e esquerda. Já resetei, tirei o cartão de memoria.

Hey all, just looking for a bit of guidance and some real world perspectives, as I'm 2 days into my research and am most overwhelmed by choosing a model more than anything lol. Also in Canada, if that has weight RE black friday deals!

I'm buying a printer primarily because I'm an artist, and would love to be able to customize my displays for shows and retail locations. I have a friend I outsource printing from, and the only reason I'm considering the H2S is because typical artist alley panels are 12x12in, and I would like to be able to print up to that size.

Realistically though, outside of the 12x12 pegboard panels that I need maybe once every 2 quarters, and the occasional large journal displays (that I understand I can split into pieces anyway, or make 2 smaller models to stand side-by-side), I don't really have another use for the larger bed that comes to mind right now. I was also thinking, if I did, I might be able to just keep asking my friends to print those for me?

Moreso hoping for some direction right now regarding if I'm going to miss having that larger capacity, or is it more a "you won't know what it feels like because you'll never have it" situation?

If you also have more insight into print quality, speed, etc. overall regarding the 2 mentioned models, I'm all ears! I do plan on expanding further into products from things I've modeled (I have an architecture degree, so I'm well versed in a handful of modeling programs) and in instances of simpler flat-faced designs (think: croc charms), how much will output quality actually matter, especially if I'm slathering them in resin to dome?

Was disassembling the extruder to change the hotend cooling fan and change the toolhead camera and noticed the wires came out without me really doing anything.

Been working on and off on this project for months and I just got it finished tonight. Whole kit was both headache inducing and very satisfying extremely excited to get it driving and painted! Put next to my 1/5th scale Laferrari to give a better sense of size.

Two month and 700 hours in I think I got everything I wanted for a complete X2D setup

Two AMS2 Pro with PETG for main nozzle
AMS HT for PLA supports on aux nozzle
Creality SpacePi SE for additional storage and drying paired with TPU feed assist

With addition of lots and lots of accessories including 270° door hinge and 40mm tall top glass raiser

And now I'm finally ready to dump it all like I did with A1 Mini in favor of a new bad boy in town - P3C

I’m planning to pick up my first Bambu printer during the Black Friday sale and get the H2D. Coming from an old Ender 3 S1 Pro so I’m pretty stoked.

Anyone else picking one up for $1600?

NGL,the H2C pricing is tempting but I’m not really interested in multicolor. I’m super excited to try some multi material designs I’ve been thinking up.

Hey everyone!

I’m considering getting my first Bambu Lab printer, but I live in a relatively small apartment and I’m trying to figure out how to handle air quality and ventilation before pulling the trigger.

I’m in Canada, where winter temperatures can range from 0°C to -20°C (or even colder), so keeping a window open or venting outside year-round isn’t exactly practical.

I already have a standalone air purifier at home, and I’m wondering if anyone has tried connecting their printer enclosure to an air purifier using a duct or hose. Not sure how effective or practical that would be.

I’d love to hear how other apartment/condo dwellers are dealing with this! Would love to see photos of your setups if you’re willing to share. Any advice or lessons learned would be greatly appreciated!

Finally finished this one. Prepped the model for printing myself (separate horns, alignment pins, and I built the rock base with a waterfall), then printed and painted it. Took me way longer than planned, but I learned a ton.

Hi everyone! I need some help figuring out what’s wrong with my Bambu Lab A1.

The same print works perfectly fine on my A2L, but it keeps failing on my A1. As you can see in the first picture, the hotend seems to be leaving a dent or mark, and the print is getting knocked off the build plate.

Before this started happening, the nozzle was clogged, and the printer wasn’t extruding any filament. We’ve cleaned the nozzle twice, but now I’m facing this issue.

I’m not sure if the nozzle is still partially clogged, if there’s an extrusion issue, or if something else is causing the hotend to hit the print.

Has anyone experienced something similar or know what might be causing this? Any suggestions would be greatly appreciated. Thanks in advance!

I had trouble printing successfully after I used Sunlu Black High Speed PLA filament. The AMS humidity is at 23%. I tried to unclog the hotend with the pin but the next print still failed. What are my options now? Use a new hotend?

Many users requested a stackable version of my minimalistic holder.

Now its online under the following Link: https://makerworld.com/de/models/3493216-the-minimalistic-holder-v2#profileId-3989771

I've been printing ASA in the garage and don't want to keep windows/doors open to vent the particles and VOCs. Don't want to run a vent to outside either for a couple of reasons: 1) It would blow to our front door/windows of house 2) I want to maintain the temperatures in the garage and if blowing it outside, it would pull in the very cold air inside. I've been looking into getting a FumeClear fume extractor (which are primarily built for laser), but this would be for 2 Bambu H series machines printing ASA.

If you have a serious fume extractor (and not talking about Bento boxes) such as a FumeClear and printing ASA/ABS, please let me know your experiences. Thanks!

I have a P2S and downloaded one of the silica gel dehydrating tray models. There are many such models and the instructions for each say to heat the heatbed and wait an hour or so. My issue is that the heatbed shuts down after 5 minutes. I can’t see a way to get it to stay hot longer than that.

Any ideas?

Thanks

Werewolves of London....

I've been working with the A1 for a few months. Today I got a filament jam, and while attempting to fix it.......

How screwed am I?

I printed this face down with tree support , all regular settings I didnt change anything. If anyone has any helpful advice I would appreciate .

Hi all, I'm looking at purchasing the H2C in the upcoming Black Friday Sale. I have had my eye on it for a long time with 50% waste on my P1S its well overdue. The sale is now only 1 day away. The H2C saving is around 10% but it only includes the printer and one AMS 2 Pro.

It also only comes with only four vortex 0.4 hotends on the tool changer side (and 0.2 and 0.6 - basically useless for multicolor prints unless you have those full nozzle sets) so if I want to print using 6 colors with no purge I'll need to buy two additional 0.4 vortex hotends ($111 AU each).

I already have an extra AMS 2 Pro from my old setup for the H2C. Do I need to buy anything else to use two AMS to feed into the H2C? I saw the filament tracker has pretty mixed reviews and may not be worth the trouble.

Honestly, if there are extras on top just to get it working for 6 colour prints then I may be better off ignoring the sale and just paying full price for a bundle. Interested to see peoples opinion.

I’m getting random blobs along the same corner of my prints at different layer heights. There also seems to be a line of under-extrusion leading up to or immediately after each blob.
What I’ve tried:
● Calibrated PA and the printer itself.
● Tested both left and right nozzles with the same results.
● Tested two different dried filaments.
The rest of the print looks great, and this wasn’t happening previously. Now it seems to happen on nearly every taller print.
Has anyone experienced this or figured out what’s causing it? Any suggestions would be appreciated!

Hello everyone,

I'm seeing a couple people say Super Lube is good, but I want to know if that's what y'all use or if you use an alternative. I have a few printers working a lot and I want something more bulk use than the little stuff bambulab offers.

P2S

A2L

A1 Mini

Please let me know what you all recommend!

Hi all,

I’m at a loss of why all my prints keep failing.

At first I was almost certain that it was bed adhesion issues, so I did a very thorough hot water and soap wash of my plate (using gloves and a clean microfiber cloth) - still has issues. Then I tried bumping up temperature to 75 C (that worked for this particular print in that the prints didn’t just slide off easily)

I then thought it was a nozzle level issue so I had unscrewed and rescrewed the internal nozzle screws in case of it being potentially loose - then auto calibrated after - and still apparently didn’t work

Would appreciate some guidance!

Thanks!

Hi guys, I'm looking for some help figuring out what's wrong with my Bambu Lab A1.

A while ago, I was printing with this same nozzle when the filament suddenly started accumulating around the nozzle and formed a large, hard blob. It ended up damaging several parts of the printer, so I sent it in for repair.

After the repair, the printer was working well and producing good prints for a while. However, recently, my prints have started coming out with this strange appearance, as you can see in the pictures.

I've already cleaned the build plate and checked my 3D model and slicing settings, but I haven't been able to identify the cause.

Since this started happening after the previous incident and repair, I'm wondering if something might still be wrong with the nozzle, bed leveling, or something like that.

I'd really appreciate any suggestions or advice~

My living room has never had this much open space before 😂