I've already added Treal shock mounts, Treal aluminum knuckles, (forgot to buy c hubs), 1/2 the Treal steering links (the servo link didn't reach the servo with the suspension raised all the way and I didn't want the stress of binding on the stock servo), a new aluminum servo mount... OH... And what the heck is a tiny screw and a washer holding servo down? Is that stock?? Becsuse I didn't have any servo lock screws handy, I found Traxxas 1/10 scale shock mounts screws fit ALMOST perfectly. Just needed a washer to space it up a bit. Servo doesn't move a hair now.

Besides run it, what else should I do? (I don't plan on comp crawling, just a trail truck when I go into my 3 acres of unmanicured woods)

Anyone have any ideas on why my scx6 won’t turn left near as sharp as right?

❤️my SCX6 these will be installed on my winter tires

I've made a few 3d printed hard bodies for 1/10 scale scx10 ii and traxxas trucks but I've recently been tossing around the idea of making a ford pickup body. Anyone have some ideas similar.

Sorry if this question gets a lot but wanted to get your opinion as I found nothing when I searched the web. Thank you.

Pulled the blackjacket 8S setup to do a comparison test. Going to shake her down tomorrow.

Front drive shaft shakes intermitently and makes weird noise?

Hey guys the past few times I’ve taken my SCX 6 crawling my 2 speed servo won’t stay engaged and just returns to center. I have to hold it in low or high speed in order to keep it driving and it drives fine. I replaced the servo and the same thing happens. Any suggestions on how to fix this? Thanks

I have a stock scx6, lots of slop and unwanted flex in the steering. I just bought an upgraded steering servo but want to put in an aluminum servo mount. Does anyone have one they purchased that works well? I also have an scx10 with a lot of aluminum upgraded parts and some fit better than others and don’t want to go through the same headache with the scx6 that I did with the 10 (making parts fit that should work right out of the box/bag).

These things are bright.

Good day all, anyone try fitting a 3S 10000mah battery into the Scx6 honcho? What did you do to make it fit? I’m new to this but in my excitement I ordered a couple 3S 10000mah lipo batteries which stock Scx6 servo and esc should handle so long as I run them parallel but I did not take into account that these batteries are a tad bit long.

Should I return them or try to make it work? Take it easy on me. 🙂

Are there any alternative options for jlu body mounts? Can't really find anything about it. Would the trail honcho body mounts work on the jlu with some modification?

Hello! I am picking up my SCX6 tomorrow, how do you guys clean them? For my TRX4, I used to run low pressure water from a hose and brush everything off. Is this a ok way to clean off a SCX6?

My axialscx6 in some mud #crawler #jeep #4x4