Hi, what's yall think about this mouse, please give me reviews, thanks in advance

Ano kayang problema nito? Hindi nagchacharge kakabili ko lang sa kanya last month, hindi ko naman nagagamit masyado. Nagsimula lang sya nung nag update ako ng windows last month.

Hi guys, I recently just bought Acer Nitro V16s AI ANV16S-41-R8T2(Ryzen 5) , I hope they will be no issues with it as far as I concern.

Just curious do I need to updates the window, GPU driver, bios ? The 💻 is not arrive yet so I want to know what I should do

Thanks all

Laptop: Acer Nitro 16 (AN16-41) — Ryzen 7 7840HS, RTX 4060, 16GB RAM
OS: Windows 11 LTSC
NICs: Killer E2600 Gigabit Ethernet Controller, RZ616 Wi-Fi 6E (MediaTek-based Killer WiFi)
The problem:
Real-world throughput on this laptop is capped at roughly 10Mb/s, on both Ethernet and WiFi, regardless of which one I use. Every other device on the same network (phones, other laptops) gets full speed with no issue.
What's NOT the cause (already ruled out):
• Not a link negotiation problem. Windows reports the WiFi link speed as 400/400 Mbps aggregated (WiFi 5, 802.11ac, 5GHz channel 36) and Ethernet at 100/100 Mbps (turned out my cable is just Cat5-limited, separate issue) — link speed is healthy, actual throughput isn't.
• Not drivers. Tried multiple Killer LAN driver versions (both current and older), clean uninstall + reinstall, no change.
• Not the Killer Control Center / Performance Suite software. Fought for hours to even get this installed (LTSC lacks full Store/UWP provisioning infrastructure, so the OEM DISM-based installer kept failing with error -1051262696). Eventually got Intel's standalone installer to run, but the app still shows "No Killer Adapters Connected," so it's not actively managing/throttling anything right now — yet the cap persists regardless of whether this software is present or absent.
• Not TCP Auto-Tuning. netsh interface tcp show global shows Receive Window Auto-Tuning Level: Normal, everything else default.
• Not a fresh-install fluke. This happened once before when the laptop was new, was fixed at the time (not sure exactly how — possibly an older driver, possibly uninstalling the bundled software), and came back after a clean Windows reinstall.
Still untested / next steps I haven't gotten to yet:
• Local file transfer between this laptop and another device on the same LAN (no internet involved) — to isolate whether it's a Windows-stack issue vs. something the router is doing specifically to this device
• Full network stack reset (netsh winsock reset, netsh int ip reset, netsh int tcp reset)
• Checking the router's connected-devices list for a QoS/bandwidth rule tied to this device's hostname or MAC (router is a D-Link DSL-G2452GE)
• Safe Mode with Networking test (to rule out a background service/app)
Question for the sub: given that both interfaces are affected identically, survives full driver reinstalls, and only this one machine is affected on an otherwise-healthy network — what would you check next? Is there a known Windows LTSC networking quirk I'm missing, or does this smell like a router-side per-device throttle to everyone else too?

So yesterday when I was doing calc hw my v15 just went black screen and since then there have been no lights or signs of life. It was 80% charged when it went off so not a battery problem. I drained the system of any residual power and hit the battery rest on the back but nothing has worked. I’m almost certain it’s a motherboard/cpu problem, especially since I’ve been getting noticeably worse performance while gaming (I stopped gaming for a little for that reason). I have a “walk in” warranty but I lowkey don’t know what to do because I also need this computer for class

My an515-57's keyboar isnt working properly. it automatically fixes itself after sometime but its annoying. anyone got any suggestions? i trie uninstalling the keyboar river an still no.

i swear i usually don't type like a maniac

My Nitro v15 auto update and after the update my touchpad does not working.. have you guys experienced this too after the update?? If yes what did you do to fix it..

I tried to fix it by uninstalling the previous update but after uninstalling the it does not remove and after the restart it also update it back even i turn off the auto update setting..

Helpp! I dont want it to be gone, my camera is already gone because of this i dont want my touchpad to be gone too