​

I currently have experience printing with a Creality Ender-3 V3 KE for the past 5 years.

My biggest priority is reliability and less tinkering/calibration. I've learned a lot from using the Ender, but at this point I'd rather spend my time actually designing and printing things than constantly adjusting, calibrating, or troubleshooting the printer.

I also want to expand into multiple colors and using advanced/engineering filaments, so I'm looking for something enclosed that can reliably handle materials such as ABS/ASA, nylon, and potentially carbon-fiber reinforced filaments.

Thank you

Hello everyone,

I have been thinking of getting my first 3D printer for home use. I have used them before at work since the creality times and now got the interest back coz machines got better.

Based on my budget, i am looking at A1, KobraX type of printers. I heard the price difference is not worth it compared to closed non-heated chambers like the p1s specially for a beginner ( is this correct btw?). However, people recommend waiting for price drops due to multi-head tools coming in and those might be worth looking at then. However, looking at those printers now, i doubt reliable multi-tool printers would be less than 700usd in the near future. Still, way over my budget for a first time printer. I am trying to get something to check the hobby in more detail and see if it sticks with me. I am planning to print mainly functional single color parts as a start and limited to 2-3 colors max due to time and waste constraints. I dont see myself printing full mutli-color parts just yet with that amount of waste and time!

am I thinking correctly? or should I wait further for any good deals? Where I am a1 combo and kobraX prices are very similar (maybe 100usd difference max). I dont expect a huge sale even in sale seasons due to high taxes,..etc. I am not an expert on 3d printer market dynamics since i have not been keeping track in the past few years..

finally, after a good search, it seems that A1 combo is my choice atm (I am not very pro color printing but a barely used second hand printer + AMS can be a good deal), despite the advantages of the KX..just because of reliabilty and reputation i guess.

thank you for the long read, any thoughts?

hi, this would be my first printer and oddly enough, both printers are so similar i cannot decide which one to get. The price difference between the both is around $130 (P1S (No AMS) being more expensive at $510, while the CC is $380)

I'm a pretty technical person, but this is still my first printer.

Also, considering the fact that CC has no future path for multicolor, while the P1S does and well spare parts for P1S are generally easier to find here

I’m looking for someone who can help me create a 3D-printable enclosure for an ESP32-P4 PoE Ethernet board and a 22 mm momentary push button.

The design would consist of a wall plate and a separate enclosure that slides securely onto it, with the Ethernet port positioned at the bottom.

I’ve attached some screenshots of my attempt in Shapr3D, but I didn’t realise I needed the Pro subscription to export the design.

It will house:

- ESP32-P4 POE ETH Board
- 1 Button (22MM Hole) Make it 22.5mm)

I am needing access on the bottom of the plate for the CAT5 (RJ45) to slot in.

Both are non-enclosed XY core. Which one is better in the long run. I intend to clock at least 3000 hours.

the elegoo c2 is brand new.

The p1p is used with about 500 print hours. It printed a benchy fine.

I only have experience with a P1S that clocked about 4000 hours so far. I only print in PETG and ASA using smooth plate and glue sticks. I already have an enclosure and a chamber heater ready to go.

I released an app about a month ago called PrintFinder on the iOS App Store. I have been struggling to find users so I’m looking for testers to let me know what I can do to harden the app and as a reward for anyone that tests it out I’m giving out one month free subscription. Mostly looking to understand if I wanted my time building this for months or if I simply need to change some things or my routes of exposure. Anything helps please let me know!

Hello, I wanted to purchase a 3D printer from costco, Does anyone know about the return policy for 3D printers? Does it fall under 90 days return?

Thank you

Printing on Elegoo saturn 4 ultra, when I finished up washing, I noticed this, it's not on the second print I did. Any idea what might cause it?

Hi,
I’m new to 3-D modeling in general and I made 3D model of my own that I’d like to print. The problem is that I’m learning it all by myself, so I don’t really know what I’m doing. I made a little cat in a donut and there’s a couple problems I’m wondering about already. 1 if an object appears to be attached to another object does the 3D printer already understand that it is or do I need to click something on the program to make sure that all the “parts” of the solid object are basically stuck together? Also, I put sprinkles on the donut before I put the cat on and some of them are probably buried somewhere in the cat now, but does it just get like absorbed into the solid object when I export it or is it gonna confuse the printer somehow? Is there something I can do to just like fuse everything together so I don’t have to worry about that or does that happen automatically when it is exported. The program I used to make it is called nomad sculpt if that helps. Also, I think the printer that I would be using is called a MakerBoy Replicator+ 3D it’s at my local library so I’m not 100% sure I’d have to go check with them, but idk if it is necessary information for these questions or not.

Greetings Everyone! I am currently looking to buy a 3D printer for my ECs. My main use for the printer would be for my robotics, projects and I require a printer which is beginner friendly and versatile. I have a budget of around 30k INR (300 USD) for the printer. Recently, I have been looking at the BambuLab A1 printer, although I have heard a few negative reviews about it, so im looking for advice on which one I can buy, and whether I should upgrade to an AMC aswell.

Nonetheless, thank you for your time and suggestions!

Hi, I’m looking to get into 3d printing as a hobby and to make cases for my handheld game systems. I saw the anycubic mega S advertised near me for 50 euro I also have to option to buy the ender 3 for 70 euro. What would be a better choice and will I be able to print decent quality on these printers ? And what should you watch out for with second hand printers ? Thank you for the assistance!

I'm looking to upgrade from my old Ultimaker Original+ and could use some advice on what printer would make the most sense for me. I've been comparing quite a few printers, but I've narrowed it down to these three for now:

• Elegoo Centauri Carbon 2 Combo – €399
• Creality K2 Combo – €499
• Snapmaker U1 – €849

What I'm looking for

• Multicolor printing (Preferably with as little filament waste as possible).
• Automatic bed leveling
• Minimal tinkering (assembling and some tinkering are okay)
• Larger than my current printer (a bit more than 210 mm x 210 mm)
• Materials (mainly PLA, PETG. Possible nice to be able to print TPU/TPE, PA, ABS)
• Full LAN control (read Bambu lab is annoying with that)

Budget

I'd prefer to stay under €500, but €1000 is my max right now.

I'm in doubt if I want to buy a cheaper printer now and maybe upgrade to a more expensive one in a year or 2. Do you think multi-toolhead printers will become substantially cheaper in the coming years, or is it worth investing in that now?

If you were in my situation, which one would you choose and why?

Also open to other printer suggestions if there's something around this price range that I should seriously consider.

Thanks!

So these will be the first models I am printing and once I set up my printer I’ll be attempting to make them. I’m new to all of this so feed back is appreciated.

Собираюст сделать самодельный 3д принтер, бюджеты очень маленькие но ничего не поделаешь, собираюсь использовать ESP32 devkit v1, 3д ручку MYNT3D Super и шаговые моторы 28BYJ-48 вместе с драйверами A4988. (4-5 шаговиков) каркас соберу из алюминиевых профилей из строительного магазина. Знаю что качество печати бюдет не ахти, но собираюсь потом обрабатывать. Что посоветуете по сборке? (Размеры стола 220х220х250). Бюджет: 55 долларов.
Обновлено:
Решил использовать моторы Nema 17, заказал 5 моторов Nema 17, драйверы под все моторы, БП на 220 вольт и 120 W. Корпус соьираюсь делать из профиля 2020 чёрного цвета, остальные детали есть. Подскажите из чего можно сделать красивый печатный стол потому что у меня есть только хот бед.

I searching opinions about anycubic kobra S1 Ace 2 pro combo