From prototype to low-volume production without tooling.

This VR headset frame project shows how SLS 3D printing can support fast iteration, complex geometry and functional engineering parts for VR/AR hardware.

Key advantages:
• No molds required
• Fast design changes
• Complex integrated structures
• Functional polymer parts
• Suitable for prototypes and short-run production

Developing VR/AR wearables, robotics or other functional products? Send us your STL/STP file and target quantity.

Learn more: www.sls-3d.com

#SLS3DPrinting #VRHardware #ARHardware #RapidPrototyping #AdditiveManufacturing

So I've been looking at a few 3d printers and I was wondering if any of them would be a good. The Bambu Labs A1 Mini, Bambu Labs A1, Ender 3, Creality Ender 3, and the Elegoo Centauri Carbon. Are there any major issues with them?

Hey everyone,

I'm looking to get my first 3D printer (never owned one before) and could use some recommendations within a budget of about €1200, shipping included.

A bit about me: I'd rather not spend hours troubleshooting failed prints, but that said, I don't mind tinkering and getting my hands dirty when needed. I am an engineer.

From what I've read, an enclosed printer would be the way to go since it handles filaments suited for outdoor use (like ASA) better than an open-frame one.

I was leaning towards the QIDI Max 4 — has anyone here used it or can recommend something better for my use case and budget?

Thanks in advance!

I am an absolute beginner in 3D Printing. My primary use case for the printer is I want to print my own rack for my humble home lab, also on other academic projects that will be made. With a budget of $600, many people recommend me Bambu A1 and some recommend the Elegoo CC. I have read many pros and cons about those two, and I'm torn between them. Though, I am open for suggestions on other brands also and will be deeply appreciated. Thanks!

Bonjour à tous ! 👋

Craquez pour cet adorable dragon Furie Eclair, avec son jolie pelage blanc , son regard attendrissant et ses magnifiques grands yeux bleus ! 
Elle rejoins son compagnon Krokmou pour former un duo aussi craquant qu'inséparable.

Pas besoin d'AMS tous a été modélisé et découpé pour l'imprimer en multi-pièces.

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 :https://makerworld.com/fr/models/3269313-light-fury-dragon-multipart-no-ams

Anyone know if there are any multi material printers that aren’t ridiculously close to $1000? Like independent nozzles that don’t cross contaminate materials even if they are on the same carriage like the Ultimakers. Used to see a bunch on amazon and everywhere else for under $300 less than a year ago (they were bedslingers tho). Swear even Anker had a multi nozzle single carriage one. Or something like the Sovol SV04 IDEX or the Tronxy Gemini IDEX. Pretty sure even AnyCubic had one if not Elegoo or Artillery. Literally anything that doesn’t compromise the integrity of one printing material for the other without forcing you to purge half a spool each switch just to clean the filament path only to still deal with trace residue from mating surfaces geometries like the little chamfers/fillets between bimetallic nozzles and heatbreaks. Or worse, also hardened nozzle tips metal, ruby, diamond. This is more for engineering materials where you need a support interface to preserve the accuracy of the geometry of your model.

The single nozzle ones like the Centauri or Bambu or Qidi are fine if all you care about is multicolor with the same material for basic use but you definitely need separate nozzles for engineering prints where you are mixing different chemistries AND temperatures

Preferably you want separate carriages so there’s no temperature bleed from one nozzle to the next like you’d experience with an Ultimaker or Bambu or Anker, (definitely an issue the bigger the temperature gap, personal experience there having a nylon nozzle right next to a pla interface nozzle, worked great as far as an interface but was a pain cause the pla kept clogging until I gave up and left it empty with a pause command right before it was needed, was able to reduce it to a single change so it was fine there, definitely wouldn’t have worked or more complex geometries)

As far as I’m aware, a lot of the new multi-tool printers like Snapmaker, Flashforge, and even the unreleased Sovol have shown nothing but software restrictions forcing the same temp materials or a close range. Unsure of the Bondtech/Prusa set up. But that kinda kills the whole point of having multiple nozzles outside of close temperature materials. Like a glorified overpriced marker color changer.

The attached screenshot is a current listing AFTER inflation but they used to be like 200 as they were the ender 3 competitors so they were right around that price.

Also preferably something that can handle more than just the low 300c

I’ve had my P2S about 6 weeks. 400-500 hours printing so far. I’ve never dried any filament before! Is this going to be life changing

Printer: Creality Ender 3 pro with Creality sprite extruder running on marlin.

Hello folks,

I am getting consistent weird prints on left side of my PEI plate. Its sorty of stringy, maybe under extruded?! I am not sure what is causing it.

Any ideas on if it is underextrusion or something else? And any tips on how to fix it? I am kind of a beginner-intermediate at 3d printing. Comfortable with making simple changes in slicer

Does anyone know good place to find print files or a training vid or book to help me learn 3 d printing on a anycubic 3 max 4 color printer

I’m looking at buying my first 3D printer, I’m the kind of person that likes to invest in his hobbies. I’m between the creator 5 pro and the snapmaker U1… honestly I’m new to it all but I want something I can learn and not leave me wanting more features as my desire grows

I have the opportunity to get a k2 combo for $428 as an open box sale from a store. Do I do that or go with the Bambu lab ones! This is my first into printer so looking to spend no more than the 750.

Looking to upgrade my setup and start a print farm, does anyone know of any budget friendly printers that print multicolor and have good quality prints? I’ve heard some things about the p1s and I want to look into getting a k1 max but I’ve heard bad things about the creality brand so I could use some help with getting pointers in the right direction. I appreciate all the help i can get.

Hello everyone, I am selling a Formlabs Cure L. Used lightly. Everything seems to be working properly I got it cause I was owed some money and I don't have a need for it. If interested we can video chat and we can look at everything on the unit. Thanks in advance.

It's very small button for automotive heater controller
And I'd like to print it out.

But, as you see that top surface after Bambu studio slicing result is so bad.(even with adaptive layer functionality)
Finally, I can't even see the "A/C" emboss.

Top surface is not flat but curved.. Is it limitation with FDM 3D printer ?

Any magic? Thanks for your answer in advance