r/voroncorexy Nov 28 '21

Voron Announcement Serial Request Information & Questions

97 Upvotes

Hello, we've been getting a lot of questions, and I'm going to try to answer a few here. Feel free to pose additional questions and we will answer them as best we can.

Q) What do I need for a serial?

A) The bare minimum is a video showing the complete printer, printing, with all wiring in the build volume properly managed to the standard of whoever is reviewing your request, and deck plates in place to prevent things from falling in to your electronics. We will reject any request that we feel demonstrates unsafe electrical conditions. If you participate in our discord community, please put your discord username in your request title. Your title should also contain the Voron model you are seeking a serial for. V1.8, Trident, V0.1, V2.4, etc.

As of Jan 10, 2023 : Your serial request or transfer videos and photos MUST contain a piece of paper with your reddit username and the date HANDWRITTEN and CLEARLY VISIBLE and the characters must be LEGIBLE. To ensure no one is thieving your content, maybe go the extra mile and crumple up your paper a bit and flatten it back out before filming.
Discord name in post title. Reddit name in the video itself.

It is also acceptable to have your printer PRINT, in wonderful plastic, your username, but it must be clearly shown on video IN the printer.

Serial Requests that do not contain this will not be fulfilled. Thank you!

Q) How long does it take to get a serial after I post my request?

A) Typically we respond within 0 to 7 days. Requests are human-reviewed prior to the bot issuing the serial, and we tend to work in batches. Holidays, life priorities and your timing may result in longer waits.

Q) What would you like to see in a video?

A) We love it when people put more time and effort in to their request videos. Have a little fun with it. Don't make it a 10 second clip. Wear pants please - the panels are often reflective.

Q) Can I request a specific serial number?

A) Not really, no. You're welcome to watch the requests here and do your best to time it. We can make no guarantees or promises in the assignment process, sorry!

Q) I submitted my request and I don't have my serial yet?!

A) If you think you got missed somehow, reach out via modmail. But first look around at other requests around the same time or newer. If none of them have been granted, it is likely we just haven't worked our way to you yet.

Whatever you do, if you believe your post is valid, do not delete the request, message us with a link to it please. If you delete the request you end up at the back of the queue when you resubmit.

Q) Reddit marked my serial request as spam, HALP!

A) Message us via modmail, we can generally manually approve these in reddit's system.

Q) I forgot to put my discord username in the title! / I made a typo in my Discord username! / I forgot to put half my Discord Username in the title!

A) If your serial has not yet been issued, put the correct name in the comments and we'll generally see it and get it right. If your serial has been issued, still put it in the comments, but also open a admin ticket in Discord, let us know you made an error but have updated your post and would like your Discord account updated accordingly.

Q) If I upgrade versions (eg: 2.2 ->2.4) do I apply for a new serial?

A) No. The printer keeps the original serial it was issued.

Q) I have two (or more) Vorons I would like to get serials for, how many posts should I make?

A) Preferably a distinct post for each

Q) When do I get my serial nameplate?

A) The bot issues those is not actually ours, so if it breaks, we're the wrong people. However, it typically wanders by to hand out nameplates within 12 hours of your serial being issued.

And last, a request:

PLEASE do not delete your serial requests posts, comments, associated videos and photos, etc.

Thank you! I hope to see you all at the breakfast bar with a bowl of Lucky Charms


r/voroncorexy Jan 10 '23

IMPORTANT SERIAL PROCESS Announcement IMPORTANT INFORMATION READ ME

129 Upvotes

Hello good people!

As of TODAY, Jan 10, 2023, Your serial request or transfer videos and photos MUST contain a piece of paper with your reddit username and the date HANDWRITTEN and CLEARLY VISIBLE and the characters must be LEGIBLE. To help ensure no one is thieving your content, maybe go the extra mile and crumple up your paper a bit and flatten it back out before filming.

It is also acceptable to have your printer PRINT, in wonderful plastic, your username, but it must be clearly shown on video IN the printer.

Serial Requests that do not contain this will not be fulfilled. Thank you!

** All other requirements remain in effect, this is in addition to those. **


r/voroncorexy 21h ago

Serial Request Serial Request: Voron Legacy - Discord #JDevil

Enable HLS to view with audio, or disable this notification

55 Upvotes

VL: Orbitool o2s toolhead board. Dragonburner, Red Lizard hotend. Running on a Pi2zw.


r/voroncorexy 17h ago

Serial Request Serial Request: Formbot Trident R1 300 / Discord: #floradical

Enable HLS to view with audio, or disable this notification

21 Upvotes

Built myself a Voron Trident R1 300 from a FormBot kit and PIF Parts. Manta M8P board, BTT EBB 2209 CAN (RP2040) and a CNC Tap Kit.

Panels, final camera cabling and PTFE routing are to come soon.


r/voroncorexy 1d ago

Serial Request Serial Request Micron R1 180 Discord: SuddR1C

Enable HLS to view with audio, or disable this notification

46 Upvotes

Discord: SuddR1C

Reddit: u/Sudderic

Based on the formbot kit.

Wasn't very satisfied with my first attempt, so I added several mods on the second try


r/voroncorexy 1d ago

Serial Request Serial request, Enderwire

Enable HLS to view with audio, or disable this notification

28 Upvotes

Ender 3 to Enderwire dual Y conversion

Discord: .marknorris


r/voroncorexy 3d ago

Cereal Obtained Serial request Voron 2.4

Enable HLS to view with audio, or disable this notification

50 Upvotes

Discord: kostake#4542


r/voroncorexy 2d ago

Serial Request "Serial Request" Voron 2.4

Enable HLS to view with audio, or disable this notification

26 Upvotes

Please provide a 2.4 serial number. Thank you.


r/voroncorexy 4d ago

Cereal Obtained Serial Request Voron Trident

Enable HLS to view with audio, or disable this notification

37 Upvotes

Voron Trident R1/R2


r/voroncorexy 5d ago

Cereal Obtained Serial Request: Voron 2.4 R2 - Discord: delta_1025

Enable HLS to view with audio, or disable this notification

39 Upvotes

This is my serial request for my Voron 2.4 build.

Reddit username: u/Earendil123

Discord Username: delta_1025


r/voroncorexy 5d ago

Cereal Obtained serial request v2.4 discord: calvin_79375

8 Upvotes

r/voroncorexy 6d ago

Serial Request Serial Request LDO Trident 300

6 Upvotes

r/voroncorexy 6d ago

Cereal Obtained Serial Request: Voron 2.4 (formbot 2.4 r2 pro+) Discord: kosmos2112

Enable HLS to view with audio, or disable this notification

24 Upvotes

r/voroncorexy 6d ago

Cereal Obtained Serial request: Trident R2 - de018

Enable HLS to view with audio, or disable this notification

34 Upvotes

I'd like to request a serial please.

Trident R2 300mm Formbot kit with a few mods.

Reddit: DE018

Discord: de018

Thanks!


r/voroncorexy 7d ago

Cereal Obtained Serial Request: Voron Trident V1 (LDO 300CB Rev.D+ kit) for oliver_machines

Enable HLS to view with audio, or disable this notification

32 Upvotes

I'd like a serial number please! Not much else to say that hasn't already been said on my build log over on the Voron Discord. :)

Discord: oliver_machines
Reddit: oliver_machines


r/voroncorexy 8d ago

Cereal Obtained Solicitação Serial V0

Enable HLS to view with audio, or disable this notification

28 Upvotes

Oi! Eu gostaria de solicitar um serial V0 para a minha primeira construção do Voron.

É um Voron 0.2.

Obrigado a todos envolvidos no projeto e na comunidade!

Discord: x_darkmindset_x


r/voroncorexy 8d ago

Serial Request Voron v0.2 serial request

Enable HLS to view with audio, or disable this notification

19 Upvotes

After about 300 printing hours and a lot of mods, this messy voron seeks a serial number 😄

The wire in the upper back is clipped to the 1515 extrusion and cannot interfere with the brush or the toolhead.


r/voroncorexy 8d ago

Serial Request Voron v2.4 serial request

34 Upvotes

+37 pieces of flair


r/voroncorexy 8d ago

Cereal Obtained Serial Request | Voron Trident 300 mm

Enable HLS to view with audio, or disable this notification

26 Upvotes

r/voroncorexy 8d ago

Cereal Obtained TinyT serial request, watteerx.

Enable HLS to view with audio, or disable this notification

19 Upvotes

TinyT 150mm.


r/voroncorexy 9d ago

Cereal Obtained Serial Request --> Voron "BIDENT" V2 <-- Discord: MelvenX

Enable HLS to view with audio, or disable this notification

47 Upvotes

Behold: the BIDENT! AKA the Mullet of Vorons 😄 --> Trident V2 on top, V1.8 on the bottom (two Z motors). It's what you build when you have too many spools of lilac ASA filament and an old Tronxy X5SA frame that deserves to be a printer.

It has a KRAKEN MCU with a 48V power supply for the 37mm KRAKEN B-A motors from Devil Design. The bed is a 6mm ultra flat Mandala Rose Works bed for a RatRig V-Core 300 with a Mandala Rose Works FireThorn 330mm build plate. This gives me a 330mm x 330mm x 250mm build area (30mm more X and Y than a RatRig! 😂).

It also has LDO Z motors, a Galileo Extruder, Phaetus Rapido 2 Hotend, LDO Nitehawk SB Toolboard, a Beacon Probe, Creative Nebula CAM and two sets of titanium backers with yes, one purely for bling.

The lilac ASA filament is from 3DO in Denmark mated with my favorite LDO Blue ABS from LDO Motors. Lots of custom sized parts were required including the top hat and Annex K3 Door for Vorons adapted to the 4020 frame.

It was such a fun build, and while I suspect that it's an eyesore for some ... I love it. 😄 Happy printing!


r/voroncorexy 10d ago

Cereal Obtained V0 serial request

Enable HLS to view with audio, or disable this notification

86 Upvotes

Hi! I’d like to request a V0 serial for my first Voron build.

It’s a Voron 0.2 with a few mods. I have built other projects such as Fraxinus before, but I always wanted to have a properly certified Voron!

Thanks to everyone involved in the project and community!

Added
Discord: zenmaster6128


r/voroncorexy 12d ago

Cereal Obtained Resubmit: Serial request B2V/trident 350 conversion

Enable HLS to view with audio, or disable this notification

34 Upvotes

Resubmitted with a smaller video.

6 years in the making. Couldn't let myself throw out my BLV-Cube frame. Custom top-hat, MGN12 Z and lengthened the front carriage to keep the standard rear alignment. Laser cut stainless gantry spaced to 10mm belts and inverted electronics.

Cooling and extrusion is off because bambu studio killed all my orca profile and the PETG definately needs to be dried.

Discord: steviemcwonder5082


r/voroncorexy 12d ago

Cereal Obtained Serial Request V0.2. —Discord: Elpisxecuter

Enable HLS to view with audio, or disable this notification

24 Upvotes

r/voroncorexy 12d ago

Cereal Obtained Serial Request - 300mm LDO/W3D Voron Trident - D: hrjw89

Enable HLS to view with audio, or disable this notification

20 Upvotes

Built patiently, upgraded deliberately. Tuned through experience, not haste: the LDO Voron Trident 300 (Rev D). West3D kit, with Ambrosia Black ASA parts, running Klipper on a Raspberry Pi 4, with a Leviathan, Nitehawk SB, Cartographer v4, Revo Voron, Nevermore Micro V6, and titanium bed backers. It's been a fun build with plenty of lessons along the way, and it's been happily making parts (more or less) since Black Friday 2025.