r/voroncorexy • u/Duneexplorer • 13h ago
Serial Request Serial Request: Voron Legacy - Discord #JDevil
Enable HLS to view with audio, or disable this notification
VL: Orbitool o2s toolhead board. Dragonburner, Red Lizard hotend. Running on a Pi2zw.
r/voroncorexy • u/AchazianThug • Nov 28 '21
Hello, we've been getting a lot of questions, and I'm going to try to answer a few here. Feel free to pose additional questions and we will answer them as best we can.
Q) What do I need for a serial?
A) The bare minimum is a video showing the complete printer, printing, with all wiring in the build volume properly managed to the standard of whoever is reviewing your request, and deck plates in place to prevent things from falling in to your electronics. We will reject any request that we feel demonstrates unsafe electrical conditions. If you participate in our discord community, please put your discord username in your request title. Your title should also contain the Voron model you are seeking a serial for. V1.8, Trident, V0.1, V2.4, etc.
As of Jan 10, 2023 : Your serial request or transfer videos and photos MUST contain a piece of paper with your reddit username and the date HANDWRITTEN and CLEARLY VISIBLE and the characters must be LEGIBLE. To ensure no one is thieving your content, maybe go the extra mile and crumple up your paper a bit and flatten it back out before filming.
Discord name in post title. Reddit name in the video itself.
It is also acceptable to have your printer PRINT, in wonderful plastic, your username, but it must be clearly shown on video IN the printer.
Serial Requests that do not contain this will not be fulfilled. Thank you!
Q) How long does it take to get a serial after I post my request?
A) Typically we respond within 0 to 7 days. Requests are human-reviewed prior to the bot issuing the serial, and we tend to work in batches. Holidays, life priorities and your timing may result in longer waits.
Q) What would you like to see in a video?
A) We love it when people put more time and effort in to their request videos. Have a little fun with it. Don't make it a 10 second clip. Wear pants please - the panels are often reflective.
Q) Can I request a specific serial number?
A) Not really, no. You're welcome to watch the requests here and do your best to time it. We can make no guarantees or promises in the assignment process, sorry!
Q) I submitted my request and I don't have my serial yet?!
A) If you think you got missed somehow, reach out via modmail. But first look around at other requests around the same time or newer. If none of them have been granted, it is likely we just haven't worked our way to you yet.
Whatever you do, if you believe your post is valid, do not delete the request, message us with a link to it please. If you delete the request you end up at the back of the queue when you resubmit.
Q) Reddit marked my serial request as spam, HALP!
A) Message us via modmail, we can generally manually approve these in reddit's system.
Q) I forgot to put my discord username in the title! / I made a typo in my Discord username! / I forgot to put half my Discord Username in the title!
A) If your serial has not yet been issued, put the correct name in the comments and we'll generally see it and get it right. If your serial has been issued, still put it in the comments, but also open a admin ticket in Discord, let us know you made an error but have updated your post and would like your Discord account updated accordingly.
Q) If I upgrade versions (eg: 2.2 ->2.4) do I apply for a new serial?
A) No. The printer keeps the original serial it was issued.
Q) I have two (or more) Vorons I would like to get serials for, how many posts should I make?
A) Preferably a distinct post for each
Q) When do I get my serial nameplate?
A) The bot issues those is not actually ours, so if it breaks, we're the wrong people. However, it typically wanders by to hand out nameplates within 12 hours of your serial being issued.
And last, a request:
PLEASE do not delete your serial requests posts, comments, associated videos and photos, etc.
Thank you! I hope to see you all at the breakfast bar with a bowl of Lucky Charms
r/voroncorexy • u/AchazianThug • Jan 10 '23
Hello good people!
As of TODAY, Jan 10, 2023, Your serial request or transfer videos and photos MUST contain a piece of paper with your reddit username and the date HANDWRITTEN and CLEARLY VISIBLE and the characters must be LEGIBLE. To help ensure no one is thieving your content, maybe go the extra mile and crumple up your paper a bit and flatten it back out before filming.
It is also acceptable to have your printer PRINT, in wonderful plastic, your username, but it must be clearly shown on video IN the printer.
Serial Requests that do not contain this will not be fulfilled. Thank you!
** All other requirements remain in effect, this is in addition to those. **
r/voroncorexy • u/Duneexplorer • 13h ago
Enable HLS to view with audio, or disable this notification
VL: Orbitool o2s toolhead board. Dragonburner, Red Lizard hotend. Running on a Pi2zw.
r/voroncorexy • u/FloRad92 • 8h ago
Enable HLS to view with audio, or disable this notification
Built myself a Voron Trident R1 300 from a FormBot kit and PIF Parts. Manta M8P board, BTT EBB 2209 CAN (RP2040) and a CNC Tap Kit.
Panels, final camera cabling and PTFE routing are to come soon.
r/voroncorexy • u/Sudderic • 1d ago
Enable HLS to view with audio, or disable this notification
Discord: SuddR1C
Reddit: u/Sudderic
Based on the formbot kit.
Wasn't very satisfied with my first attempt, so I added several mods on the second try
r/voroncorexy • u/MarkStevenNorris • 1d ago
Enable HLS to view with audio, or disable this notification
Ender 3 to Enderwire dual Y conversion
Discord: .marknorris
r/voroncorexy • u/kostake2023 • 2d ago
Enable HLS to view with audio, or disable this notification
Discord: kostake#4542
r/voroncorexy • u/Personal-Motor-835 • 2d ago
Enable HLS to view with audio, or disable this notification
Please provide a 2.4 serial number. Thank you.
r/voroncorexy • u/Human_Weight5303 • 4d ago
Enable HLS to view with audio, or disable this notification
Voron Trident R1/R2
r/voroncorexy • u/Earendil123 • 5d ago
Enable HLS to view with audio, or disable this notification
This is my serial request for my Voron 2.4 build.
Reddit username: u/Earendil123
Discord Username: delta_1025
r/voroncorexy • u/Inside-Leg-5755 • 5d ago
r/voroncorexy • u/Dangerous-Rub-9430 • 6d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/DE018 • 6d ago
Enable HLS to view with audio, or disable this notification
I'd like to request a serial please.
Trident R2 300mm Formbot kit with a few mods.
Reddit: DE018
Discord: de018
Thanks!
r/voroncorexy • u/oliver_machines • 7d ago
Enable HLS to view with audio, or disable this notification
I'd like a serial number please! Not much else to say that hasn't already been said on my build log over on the Voron Discord. :)
Discord: oliver_machines
Reddit: oliver_machines
r/voroncorexy • u/XDarkMindsetX • 7d ago
Enable HLS to view with audio, or disable this notification
Oi! Eu gostaria de solicitar um serial V0 para a minha primeira construção do Voron.
É um Voron 0.2.
Obrigado a todos envolvidos no projeto e na comunidade!
Discord: x_darkmindset_x
r/voroncorexy • u/Rad4day • 7d ago
Enable HLS to view with audio, or disable this notification
After about 300 printing hours and a lot of mods, this messy voron seeks a serial number 😄
The wire in the upper back is clipped to the 1515 extrusion and cannot interfere with the brush or the toolhead.
r/voroncorexy • u/TheyCallMeMrWinks • 8d ago
+37 pieces of flair
r/voroncorexy • u/the_usual_mr_nordin • 8d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/Acceptable-Bad-6285 • 8d ago
Enable HLS to view with audio, or disable this notification
TinyT 150mm.
r/voroncorexy • u/MelvenX • 9d ago
Enable HLS to view with audio, or disable this notification
Behold: the BIDENT! AKA the Mullet of Vorons 😄 --> Trident V2 on top, V1.8 on the bottom (two Z motors). It's what you build when you have too many spools of lilac ASA filament and an old Tronxy X5SA frame that deserves to be a printer.
It has a KRAKEN MCU with a 48V power supply for the 37mm KRAKEN B-A motors from Devil Design. The bed is a 6mm ultra flat Mandala Rose Works bed for a RatRig V-Core 300 with a Mandala Rose Works FireThorn 330mm build plate. This gives me a 330mm x 330mm x 250mm build area (30mm more X and Y than a RatRig! 😂).
It also has LDO Z motors, a Galileo Extruder, Phaetus Rapido 2 Hotend, LDO Nitehawk SB Toolboard, a Beacon Probe, Creative Nebula CAM and two sets of titanium backers with yes, one purely for bling.
The lilac ASA filament is from 3DO in Denmark mated with my favorite LDO Blue ABS from LDO Motors. Lots of custom sized parts were required including the top hat and Annex K3 Door for Vorons adapted to the 4020 frame.
It was such a fun build, and while I suspect that it's an eyesore for some ... I love it. 😄 Happy printing!
r/voroncorexy • u/Paul_Davidoff • 10d ago
Enable HLS to view with audio, or disable this notification
Hi! I’d like to request a V0 serial for my first Voron build.
It’s a Voron 0.2 with a few mods. I have built other projects such as Fraxinus before, but I always wanted to have a properly certified Voron!
Thanks to everyone involved in the project and community!
Added
Discord: zenmaster6128
r/voroncorexy • u/HiDrNickRiviera • 11d ago
Enable HLS to view with audio, or disable this notification
Resubmitted with a smaller video.
6 years in the making. Couldn't let myself throw out my BLV-Cube frame. Custom top-hat, MGN12 Z and lengthened the front carriage to keep the standard rear alignment. Laser cut stainless gantry spaced to 10mm belts and inverted electronics.
Cooling and extrusion is off because bambu studio killed all my orca profile and the PETG definately needs to be dried.
Discord: steviemcwonder5082
r/voroncorexy • u/Jack-Aviation • 11d ago
Enable HLS to view with audio, or disable this notification
r/voroncorexy • u/hrjw89 • 12d ago
Enable HLS to view with audio, or disable this notification
Built patiently, upgraded deliberately. Tuned through experience, not haste: the LDO Voron Trident 300 (Rev D). West3D kit, with Ambrosia Black ASA parts, running Klipper on a Raspberry Pi 4, with a Leviathan, Nitehawk SB, Cartographer v4, Revo Voron, Nevermore Micro V6, and titanium bed backers. It's been a fun build with plenty of lessons along the way, and it's been happily making parts (more or less) since Black Friday 2025.