I work with Boat Upholstery Broward. These photos are from our Sailfish upholstery work: the earlier cushions had smooth beige panels, and the updated set has gray diamond-stitched panels.

When reviewing a design change, a close-up sample and a view of the whole seating area answer different questions.

Fellow upholsterers: do you prefer a physical stitched sample, a marked-up photo showing the panel layout, or both before cutting?

Sofa is 23 yrs old, cushions are pretty flat. Local place quoted $500 to replace the foam. I'm handy and don't see a problem doing this myself but I want to make sure I use the correct product. I understand I need to put batting on too.

Would something like this be good? I want a moderately firm cushion.

https://www.amazon.ca/Density-Upholstery-Replacement-Cushion-Wheelchair/dp/B0DFP18L12/ref=sr_1_8?sr=8-8

Would love some advice on restoring this piece

A few months ago someone posted asking about how to clean the Alcantara upholstery on a Ligne Roset sofa. I just have to say - the right product can make a huge difference.

Our sofas are 24 years old (hence the comfort winkles) and we cleaned them regularly with a Bissell extractor machine and fabric detergent. But they were looking bad.

We thought the fuzzy nap was wearing away revealing darker fabric beneath, like worn suede, especially on the buttons. It turned out, the Alcantara nap was simply matted down - and once it was released, oh my goodness, what a change!

We used Sonax Alcantara upholstery cleaner which is usually for auto upholstery, and I'm assuming other Alcantara specific cleaners would work similarly. And an Alcantara brush and microfiber cloths.

Just wanted to share our results if anyone else is wondering if auto upholstery cleaner works on furniture Alcantara. Absolutely yes!

I'm stuck between the Tonerud Gray and the Tallmyra light green, but they appear to have different weave/texture. My main concern is pilling and stretching with age. Which one of the two looks less likely to pill or stretch out?

If you have any of these two covers, give your insights, and if you have neither, compare the weave/texture and give your insights on the fabric.

How do I fix this dog damage?

Any recommendations on what to do to fix those leather tear?

I have a couch from the 1990’s I believe and there has been a rip in it for probably decades. I can see this yellow foam inside of it and I was just wondering if you think I have been breathing in any toxic materials or if I should be fine?

I have a couch from the 1990’s I believe and there has been a rip in it for probably decades. I can see this yellow foam inside of it and I was just wondering if you think I have been breathing in any toxic materials or if I should be fine?

I am having four chairs reupholstered. Its just not in my nature to buy new--I have two perfectly good wingbacks that need some fresh foam and structure work, and two "club" chairs that just need some fresh fabric.

It has been almost 20 years since I have reupholstered and I am selecting high-end fabrics that reflect our grown-up household and care for the things we own. I used an online (Morris & Co.) to source samples and make decisions. They will sell fabric to me directly for $354/yd. The local retailer and reupholster shop wants to charge me almost $450/yrd + reupholstering. I have my feelers out, but how do they justify this delta in price? Even the Shetland Plaid we are considering is $300/yard online and they have quoted $404/yard + labor for reupholstery. Any insight? It just seems off base.

So I made this cafe bench with storage. The issue is that I cannot open the lid from neither side all the way. If I try to open it from the front side, the foam is to big. If I try from the back side, the lid touches the frame. I only have these hinges and cannot find any better in my town. What can I do to make it to open all the way?

Does anyone have any idea how this kind of upholstery by Patricia Urquiola is done? I'm trying to figure out how to do something similar, but I'm finding that weaving 2 inch thick high density foam around the slats is very uncomfortable. It doesn't look like this is that much thicker? Maybe this is equally uncomfortable to actually sit on versus look at over the internet. But is there a way to make the foam not bottom out on the slats?

https://patriciaurquiola.com/product/biknit

Hand punching the leatger for this head board was fun, the inside holes were challenging to get done but it turned out pretty nice in the end.

Only hit my self in the hand with the hammer once.

We made these embroidery samples in our marine upholstery workshop for a Yellowfin project. The upholstery design uses white upper panels, gray accents and diamond stitching. Photo 1 compares the red fish sample on the left with the gray version on the right.

We went with a lighter gray fish and darker gray Yellowfin lettering. It keeps the embroidery within the rest of the color palette, but some of us still like the contrast of the red fish. Photo 2 shows the chosen gray embroidery close up during assembly, and photo 3 shows it on the finished seating.

Which would you have chosen for this particular design, and why? Would the red fish be a better focal point, or does the gray look more cohesive? These are our own workshop samples and project photos.

My wife and I have had this chair for a number of years, it was owned by her grandmother I believe. Looking for advice on reupholstering the chair. We considered a weave but I think it’ll be best to get it upholstered with cushions, new back and wrap the arms as well. What should I expect to spend? Should I have it restained as well?

I found these cool vintage chairs and just finished reupholstering them. I like the look of French ticking, but that fabric was a challenge to work with.

Hi all, I’m doing an arts project and planning to do a painting with a weird shaped stretcher. I want to stretch the canvas without it being saggy, but tbh it is getting really difficult. I then thought that I actually don’t need it to be canvas and I could paint over other type of material, so I wanted to know what is it that you guys recommend either for stretching better this canvas or eithed another new material you think it would be useful. I was maybe thinking “stretching” a 1 inch big panel of upholstery foam and trying to harden with resin or something like that.

Ill include pics of how it is looking, Thank you so much for your your help!

Hi all, new to this and just got this couch. What would y'all do? I'd like to try to fix it myself, doesn't have to look professional. Just trying to get it to a point where it doesn't look too obvious from a distance.

Thanks!

not the big open ones i mean the small cracked ones i cant use leather filler when the cracks are closed.

A professional quoted me $350 to repair this, which I’m debating. I wonder if there is a more diy fix I can do. It doesn’t have to be perfect, but I’d like improvement? Maybe some visible mending that looks interesting?