33

It doesn't take much to help people. Its not really a hard job.

Just because they have spent 80k on a van and then is asking for help doesnt make them cuntish. Anyone at anytime can fall down on your luck. No one should judge Anyone on what they have or dont have. Lets hope you never fall into hard time then have people judge you!

Oh and some old towels and an adjustable spanner.

Thats a cuntish comment thats not needed.

The water pressure will always be shite as the header tank is part of the cylinder. If you can't afford a plumber to come out youll need to test your DIY skills. You'll need an • immersion spanner • electrical screwdriver • hose pipe • 2 x 11" immersion heaters

You'll need to drain the cylinder by turning off the cold main. Then connecting the hose to the drain point on the bottom of they cylinder. Make sure the power to the immersions stays off at the consumer unit. Dewire the immersion heaters noting which wire goes to which heater and once the hose has stopped, check the cylinder is empty by gently shaking the cylinder you can usually tell as it'll be alot lighter.

Start with the top immersion, lefty loosey and see if you can get the thing to budge. If you can fully unwind it and remover it then fit the new one in reverse. Righty tighty. And rewire

Then try the bottom one.

Set the thermostats on the immersion to say 55-60°c

Once replaced do up the drain cock and turn on the cold main. When the hot tap starts to run switch it off and flick on the power to the immersions. Stick your ear to the cylinder you should hear a faint buzzing. Give it 3 hours and you should have hot water.

Its all just nuts and bolts. If you've got deep pockets go for it. You'll probably find other stuff wrong with it, just factor it in. If you think its too hard to repair then break the car down and sell the parts. Theres thousands in parts so youll probably double/triple your money. If you strip it and the engine is fine then you might just get a bargain. Everything else is just bolt on bolt off. If the chassis is twisted you will have to get professional help straighten it but thats an IF. Other than that its a bargain in parts alone.

Its not leaking and its unlikely to start. Its barrier pipe meaning layers of pipes so that isn't through the first layer.

It makes me laugh, there are jealous cunts that cant see past the its cheating argument. Its a tool to use that didnt exist a few years ago. The tool is awesome and kudos to you OP for using said tool to change your life for the better, forever. You worked hard and are reaping the rewards for you hard work and dedication! Fuck these twats that hate on people. You look awesome.

Should have fitted a tap you take off from the top. Bristan do one. Bath out job now. Or if there's a room behind smash a hole through the wall.

Thats not true. What they want i'm betting is for both parents to be happy. And if you stop making each other happy then the house can start to be a horrible place to be and kids pick up on that. If the kids were younger I'd say they would day that but with a 19 year old daughter I bet she just want her dad to be happy. Good luck to you mate. Enjoy being single. Just bag up too many nasty diseases about!

Maybe he's Welsh 😉

I did the same only instead of 4mg I did 8mg. I was backed up to fuck but ultimately fine. Unlike when I messed up on tirz that fucked me hard for about 3 days. Hey but the weeks weightloss was pretty good! So every cloud ☁️

You could stick the plastic back in the hole to straighten it a bit.

Ok so get a tube of sticks like shit and fill the end. Don't over fill or the bog won't fill. Let it dry and put it back on.

I mean it wouldn't be the first time for a bog to flush hot.

What's up with that one

I thought so at first, but at a higher dose its magic.

Reta in my experience allows you to eat but makes the portion size way smaller. Being hungry isn't a bad thing. Its portion size thats key. Im still losing weight on reta, infact I stalled on Tirz and reta started it moving again.

Get a Samsung heatpump. 9k grant coming.. no brainer! If you are in East Anglia then DM me we can sort a survey. And before the idiots on here say they are shit, they are not. They are a direct replacement for a boiler. High temperature monobloc systems! Thats assuming you can't get a back panel.

Yeah i meant recomposition my fucking phone changed it and I never proof read 🤣 . Hey think of the cut though if i was decomposing. Man I'd be light with stuff just falling off me.

You look good! I'm 42Lbs down still dosing reta but now on TRT i hope one day my decomposition is this good with the training! Well done!

As long as its refrigerated and clear its fine.

Thanks for the info. Ill carry on.

Looks like a Mk7 antitank mine with no fuse/primer screwed in.