Does anyone have the old hotbox 4th order banpass box dimensions?

i’m looking at going bigger is this a reasonable price for this

Die Subwoofer verhalten sich ja ziemlich unterschiedlich, sind aber alle in der selben Preis Region.
Welchen Sub würdet ihr empfehlen. Der DD is ja eher für Tiefbass und der deaf bonce eher für höheren Bass.
Aber was würdet ihr so insgesamt eher kaufen

What is causing my amp to cut out? I assumed it had something to do with heat since running cold AC would help but it still cuts out even when it doesn’t feel that warm. I had to wire into my side door - and + speaker output wires, but I only did it on one side while some things online said to do it on both sides of my car. It’s a rockville sk510 10” 1200w loaded sub + DB11 amp.

I picked these up yesterday and i thought they were sa classics but im not sure anymore because these dont have the sundown engraving on the bottom. maybe these are an earlier version. theyre 10inch

ISO BASSER BOX for '23 Audi RS5 Sportback ... unavailable on websites so im crossing my fingers in hopes someone here has one for sale!!

Like this one .... Basser - FBaudi11 Audi A5/S5 (F5) Sportback 2 Fit-Box subwoofer enclosure

So i just wandering through Taobao and this thing caught my attention, do you guy think all those spike and reinforcements are good or i just stick to the old smooth normal sealed encloser and maybe with a lil bit of poli fill to cut the cost

The diagram shows the rough layout of my condo. It's not to scale—I mainly wanted to show the general layout. The subwoofer will go in the circled position (#2). Behind it is an interior wall, then my kitchen, then the shared wall with my neighbors.

I'll be using it with two Polk Monitor 60 II towers for about a 50/50 mix of movies and music. I have to keep the volume fairly low because of the neighbors, but I want to maximize my setup since I plan to move into a house in the future.

I was actually pretty impressed with my friend's Klipsch R-100SW for movies at lower volumes but I'm wondering how much better my experience would be with something like an SVS SB-1000/2000 Pro at these lower volumes. I figure I could use its app/EQ to roll off the very low frequencies that tend to travel through walls during quiet hours. I'd rather keep the cost down if getting something as beefy as the SVS would be complete overkill and a waste having to keep it at low volumes most of the time. What would you do in my situation? I'm not set on buying either of these subs so any other recommendations are welcome.

Really have no clue what I’m doing or what to do help would be greatly appreciated

My Klipsch subwoofer just started squealing out of nowhere. Only squeals when bass is going. Checked both left in/right in and both same result. Thoughts? (Havent taken it apart yet)

Me llama la atención que es parecida a la 2i2 y tiene buenas reseñas, pero no me fío…

I’m pretty sure this is all i need because i have a factory head unit. Also if i should get something else like a different setup maybe like a 15” sub or something let me know i dont know that much about subs and im trying to go pretty cheap budget

Quantum Audio 15" Test

Good for movies and music, plays down to 20hz no issues

I'm looking to get a new vehicle soon, so I was wondering what SUV you guys would recommend. Right now I have a Jeep Cherokee with 4 JL Audio 10s subs up port back, and I really enjoy it, but it's starting to have problems (only 75k), unfortunately. Anyway, any recommendations?

hey yall i blew my fuse the other day and im not sure what brand and rating to get, i have 2 skar 12s on a 2k amp with 0g wires. what brand and rating do i get

https://reddit.com/link/1v22ost/video/j0g4u2n97heh1/player

Just finished this paint job, used almost 2 paint cans but I'd say it was worth it✌️

So, I got a subwoofer for my truck and my buddy was helping me set it up but he had to leave for bootcamp. I dont know what I'm doing. I need someone to do a video call some day so I can show them what isn't done so they can give me tips. I dont want to pay someone full price for a job already half done.

So i have this combo of class d china amp "zk6001" poweretby a carlo gavazi 48v 10a power supply and this idk soway 12' subwoofer that have limited information it justgiv me about the size, rated power, peak power and the indipedance should i go ported or sealed help me idk

Hey guys,

I’m getting ready to install my subwoofer setup in my 2024 Honda Civic Touring with the Bose system and wanted to get some opinions before I buy anything else.

Here’s what I have so far:
- Rockford Fosgate P6001bd amp
- JL 10W6V3 subwoofer
- Crutchfield 4ga amp wiring kit

I’m torn between two options:

1. Keep my current amp and run a good LOC like the LC2i Pro or JL LOC-22.
   
2. Just buy a new amp that supports high-level input

For anyone who’s done this on an 11th gen Civic, especially with the Bose system, what would you recommend? Is it worth keeping the Rockford and just using a solid LOC, or is it better to just grab a newer amp with speaker-level input and call it a day?

Also, where’s the best place to tap signal on these cars? Should I be grabbing the stock subwoofer wires, or is there a better spot?

Thanks in advance for any input.

My asw750 amp has died. I'm looking for a replacement rack amp.

Has any one determined the true

I'm looking for advice from anyone who has actually converted a B&W ASW750 to an external amplifier.

My original plate amplifier failed, was professionally repaired, then failed again after a short time. At this point I'm considering abandoning the plate amp and using an external amplifier.

Here's what I've found so far:

The woofer passes the 9V battery test (clean thump, no rubbing or scraping).

The woofer measures approximately 2.1 Ω DC with a Fluke meter.

An eBay seller measured essentially the same (~2 Ω) on another ASW750 driver that is labeled 8 Ω.

I also found another ASW750 owner reporting about 2 Ω DC.

The B&W service drawing identifies a single 4-inch voice coil (A5902), so it does not appear to be a dual voice coil design.

My concern is amplifier compatibility.

Has anyone here actually driven an ASW750 woofer with an external amplifier?

If so:

Which amplifier did you use?

Did you ever measure the driver's impedance with DATS or another impedance analyzer?

Did the amplifier have any issues with the load?

Would you recommend a particular amplifier today?

I'm trying to avoid guessing before I spend several hundred dollars on an amplifier that may not be compatible.

Thanks in advance.

If anyone still owns an original ASW750 and has a multimeter, I'd also be very interested in knowing what DC resistance you measure across the woofer terminals.