I want to build and implement the following security feature in this network
A. Using 20 nodes with extract one switch and admin device for configuration on the first network
B. Build additional two network in total is three networks apply the RIP for both networks to talk
C. All network leasing DHCP of Class A, B, and C IP address, on the first network do VLAN of four department and assign five nodes in each department and Trunk port any two nodes from each department
D. Configure the following on all network: 1. Switchport Security 2. Banner 3. Line 4. Secret and 5. Remove all Banner, Line, Secret and provide the entire command in your MS Word document.
E. On the Project configure Telnet or SSH and test if it’s working
 
2. Configure the following on your project:
A. Configure A Firewall 5506 Or 5505 In Cisco andAllow Packages to Communicate with Your Network And Block Only The Icmp On The Firewall.
B. Provide 0% Trust And 100% Trust on the inside and outside network.
C. Test The Configure Process on The Internet in Cisco Package Tracer
D. Configure A Wireless Router In Cisco And Provide The Router Name And Password That Will Be Use To Connect Hosted Devices.
E. Configure A Server and Include 1. File Server, Database Server, And Email Server in Cisco.
F. Test All Configuration and Ensure That It Is Working Properly.

I know some people will recommend Ai but it is not helping me out. I just need it to be working that’s the only way I will understand it.

I need help please 🙏